Skip to main content

Are 45 records 7 inches?

7-inch records are often referred to as 45s due to their play speed being 45 RPM. These records are noticeably smaller than their LP counterparts, and they spin significantly faster. The higher RPM gives 45s superior sound quality, but it also means that only a few minutes of recorded sound can be stored on each side.
Takedown request View complete answer on thesoundofvinyl.us

How many inches is a 45 record?

Chances are, the records you'd like to listen to are full-size 12-inch records, spinning at 33 1/3 RPM, or 7-inch singles, spinning at 45 RPM. Often, EPs and maxi-singles are produced on 12-inch disks that also rotate at 45 RPM.
Takedown request View complete answer on victrola.com

What size is a standard 45 record?

Shellac Records vs Vinyl Records Performance

The size is the most notable difference in the performance of 78 shellac records and 33 or 45 vinyl records. The 45s are typically 7 inches, but 78s and 33s can be either 10 or 12 inches.
Takedown request View complete answer on sumikophonocartridges.com

What size is a 7 inch record?

7-inch stands for a vinyl with a diameter of 17,78 centimeters. 10-inch stands for a vinyl with a diameter of 25,4 centimeters. 12-inch stands for a vinyl with a diameter of 30,48 centimeters.
Takedown request View complete answer on vinyl-waller.fr

What is 7 inch version?

The most common form of the vinyl single is the "45" or "7-inch". The names are derived from its play speed, 45 rpm (revolutions per minute), and the standard diameter, 7 inches (17.8 cm).
Takedown request View complete answer on en.wikipedia.org

Why Buy 45 RPM Vinyl Records?

How long is a 7 vinyl record?

7" Records (often referred to as 45's) can be cut at 45 RPM or 33 1/3 RPM. When cut at 33 1/3 you can hold approximately 6:00 minutes per side. When cut at 45 you can hold approximately 4:30 minutes per side.
Takedown request View complete answer on urpressing.com

Why do 7 inch records have a large hole?

Tonearms hate wobbly records. A larger hole allowed the sudden rotational forces to be distributed over a greater distance (π x 1.5; about 4.712 inches), reducing wear and allowing the hole to stay rounder longer. This was especially important for the jukebox industry.
Takedown request View complete answer on globalnews.ca

What is a 7 or 12 inch record?

This record type is commonly used in disco and dance music genres, where DJs use them to play in clubs. They are played at either 331⁄3 or 45 rpm . The conventional 7‐inch single usually holds three or four minutes of music at full volume. The 12‐inch LP sacrifices volume for extended playing time.
Takedown request View complete answer on en.wikipedia.org

Do all record players play 7 inch?

There are only three commonly available vinyl record sizes; 7 inch, 10 inch, and 12 inch. Most record players can accept all three sizes. In the early days of the 45-RPM singles developed by RCA they also made record players specifically designed for 7 inch singles.
Takedown request View complete answer on quora.com

How thick is a 7 inch record?

PRODUCT INFO. 1.5mm thick or 2mm vinyl record. Small OR big hole (black - upon demand). Length at 33⅓ RPM needs to be limited to 6 minutes per side for best quality.
Takedown request View complete answer on cutsonwax.com

Is a 12-inch record a 45?

12 Inch Singles

Generally cut at 45 RPM, they feature wider groove spacing and shorter playing time compared to LPs, which permits a broader dynamic range or louder recording level (among other benefits. Twelve-inch records are popular in dance music, where DJs use them to play in clubs.
Takedown request View complete answer on yoursoundmatters.com

Is a 12 inch vinyl a 45?

12-Inch LPs

They usually play at 33 ⅓ RPM, but finding a 45 RPM 12-inch LP is not unusual. The reason for the difference in RPM is the sound quality. 45 RPM records sound better, and as a result, are better collector's items for audiophiles.
Takedown request View complete answer on thesoundofvinyl.us

How big is a 45 album?

They are often part of audiophile pressings or special releases. Single discs are physically smaller – usually 7 inch 45 RPM releases. If you purchased the full length, 12-inch album, you have an LP.
Takedown request View complete answer on blog.fluance.com

What records are 10 inch?

10" Records (same size as classic 78's) can be cut at 45 RPM or 33 1/3 RPM (we can cut them at 78 too, but few would be able to listen to them). When cut at 33 1/3 you can hold approximately 12:00 minutes per side. When cut at 45 you can hold approximately 9:00 minutes per side.
Takedown request View complete answer on urpressing.com

How many inches in diameter is a 45rpm record?

Twelve inches (30 cm)

A twelve inches, or 12" in short, is a vinyl record measuring 12 inches in diameter, i.e. 30.48 centimetres. This format is usually used for albums and more generally for the 33 rpm long play records, it is also used for the 45 and 33 rpm max or even some singles.
Takedown request View complete answer on vinylunity.com

Can I play a 45 on a regular record player?

In order to play a 45 RPM record that has a 1.5-inch hole, you must use an adapter that has an outside diameter of 1.5 inches and a 0.25-inch hole in the center.
Takedown request View complete answer on audio-technica.com

What is most common record size?

The most common vinyl record sizes are 7, 10, and 12 inches. The most frequent size of the vinyl records is 12”. Both sides of these records can store 45 minutes of music in total. The smaller sizes of 7” and 10” – consequently allows storage of less music.
...
VINYL RECORD SIZES
  • 78 RPM Records History: ...
  • 3313 RPM: ...
  • 45 RPM:
Takedown request View complete answer on everpresent.com

What is the most popular size record?

12-inch: Twelve inches is the standard diameter for full albums, generally holding up to 22 minutes per side. These records run at 33-1/3 RPM. As a general rule, a record with a larger diameter takes more time to complete a rotation than a smaller one, meaning an extensive record will have a smaller RPM.
Takedown request View complete answer on recordhead.biz

Do thicker records sound better?

You'll often hear folks claim that heavier weight vinyl allows for deeper grooves and more “detail,” but in reality, the technical standards for cutting grooves to vinyl master discs are exactly the same for all records regardless of weight.
Takedown request View complete answer on yoursoundmatters.com

What is the middle of a 45 record called?

A 45 rpm adapter (also 45 rpm record insert, or 45 rpm spindle adapter) is a small plastic or metal insert that goes in the middle of a 45-rpm record so it will play on a turntable.
Takedown request View complete answer on amazon.com

Are records ever perfectly flat?

If what you see looks bent or twisted, you might have a warped vinyl record on your hands. If the warping isn't severe, but you aren't sure if your record is completely flat, place it on your turntable. If it won't lie flat and you can see gaps between it and the platter, it's badly warped and will need some TLC.
Takedown request View complete answer on thesoundofvinyl.us

What speed do you play 7 inch records?

Due to the listening time of around 22 minutes, 33 ⅓ RPM (12 inch) records are primarily used for LPs (Long Play Records) which house full albums split over 2 sides. 45 RPM (7 inch) records are smaller in size and cheaper to produce, and can house around 5 minutes per side.
Takedown request View complete answer on vinylchapters.com

When was 7 inch vinyl invented?

After teasing news of the new format through late 1948 and early 1949 (RCA was looking to put a crimp in the marketing plans for Columbia's album), the world was finally introduced to the 7-inch, 45 RPM single, which made its official debut on March 31, 1949.
Takedown request View complete answer on globalnews.ca
Previous question
What team was cr7 in FIFA 17?
Next question
What controller does Nick use?
Close Menu