Skip to main content

Can I use AUX for subwoofer?

For many years, sound engineers have used Aux Fed Subwoofers in their systems. By only sending instruments that need to be in the subs, to those subs, you eliminate the need to EQ alot of the subharmonic frequencies out of the vocals and instruments that don't have subharmonic frequencies to begin with.
Takedown request View complete answer on help.harmanpro.com

Can I connect subwoofer to audio output?

If you are using your subwoofer with a stereo receiver that lacks a subwoofer output (and many of them do), you can connect the subwoofer using an extra set of speaker cables, as shown above—provided the subwoofer has speaker-level (speaker wire) connections, as the picks in our Best Budget Subwoofer guide do.
Takedown request View complete answer on nytimes.com

What is a sub on an aux?

Subwoofers. The primary idea behind aux-fed subs is as a way of removing this unwanted low frequency energy from the subwoofers completely, applying signals only with relevant information in order to get a cleaner sub-bass output with minimal power wastage and maximum headroom resulting in a punchier mix.
Takedown request View complete answer on totalproaudio.stevebunting.com

Can you hook up a subwoofer without a subwoofer output?

An easy way for how to connect a subwoofer to a receiver without a subwoofer output jack is to use a great subwoofer cable like RCA cables via RCA inputs. There will most likely be a preamp output on your stereo receiver even if it doesn't have a subwoofer output.
Takedown request View complete answer on theproductanalyst.com

Can a normal speaker be used as a subwoofer?

You can't take any speaker and make it into a subwoofer by conversion. Subwoofer speaker drivers are specially designed to reproduce low frequencies, below 50–60 Hz, efficiently at the cost of all other frequencies.
Takedown request View complete answer on quora.com

Why I Quit Using Aux Fed Subs (And Do This Instead)

Is a subwoofer just for bass?

A subwoofer (or sub) is a loudspeaker designed to reproduce low-pitched audio frequencies known as bass and sub-bass, lower in frequency than those which can be (optimally) generated by a woofer.
Takedown request View complete answer on en.wikipedia.org

Can you run a subwoofer without an amp?

Do You Need An Amplifier for Your Subwoofer? In nearly all cases, the answer is yes. Unless you have a system in your car or boat that is already powering a subwoofer, you'll need to find an amplifier that will power your sub.
Takedown request View complete answer on caraudionow.com

What's the best way to connect a subwoofer?

The optimal connection for a standard powered subwoofer is to use the RCA (Phono) "sub" or "woofer" line out found on home theater receivers and pre-amps. Some subwoofers offer "High Level inputs" (speaker wire connections) for use with a receiver or pre-amp without a sub RCA connection.
Takedown request View complete answer on support.klipsch.com

Does a subwoofer need two inputs?

Hooking Up Your Subwoofer

Most subwoofers have both a left & right input. It usually doesn't matter which one you use. Some people will buy a “Y adapter” or “splitter” so that a single cable can feed both subwoofer inputs.
Takedown request View complete answer on aperionaudio.com

Can I use pre out for subwoofer?

It connects an external power amplifier in place of the built-in one integrated in the receiver. Pre-outs can be used with subwoofers that have their own internal amplifier.
Takedown request View complete answer on ooberpad.com

How do I connect my woofer to aux?

Insert one end of the AUX cable into the AUX input on the bottom of your speaker. Insert the other end of the AUX cable into the AUX output port on your audio device. Turn the SOURCE knob to AUX, then push once to activate.
Takedown request View complete answer on support.urbanears.com

Is Aux the same as audio?

AUX connections (input or output)

This is simply an audio input to which you can connect players of your choice. This could be anything from an old cassette deck or a modern player such as an mp3 player or smartphone. If you want to quickly and easily connect your computer, it's also best to use the AUX input.
Takedown request View complete answer on blog.teufelaudio.com

Why do subwoofers have 2 inputs?

Dual input allows the subwoofer an extra sensitivity adjustment. Normally, it would be enough to use a mono LFE subwoofer signal from its processor. If you have a processor with very low output so you can use a Y-splitter. By using both inputs with the same mono signal doubles the subwoofer sensitivity.
Takedown request View complete answer on earthquakesound.eu

Can I use audio cable for subwoofer?

Can I use an RCA cable for my subwoofer? As long as your RCA cable has the appropriate connectors, you can connect it to the subwoofer. To manage your expectations, though, an RCA cable won't deliver the same level of performance as a subwoofer cable, especially when it comes to bass reproduction.
Takedown request View complete answer on soundton.com

Which output to use for subwoofer?

Connect Using the LFE Subwoofer Output

The preferred method of connecting a subwoofer is through the subwoofer output (labeled SUB OUT or SUBWOOFER) of a receiver using an LFE (Low-Frequency Effects) cable. Almost all home theater receivers and processors and some stereo receivers have this type of subwoofer output.
Takedown request View complete answer on lifewire.com

Can I connect subwoofer to headphone jack?

It should work fine. You will have to sum the two headphone channels together using resistors, but this may not be necessary because most headphone outputs just use resistors off the speaker outputs. I assume you won't be limiting low frequencies to your main speakers, just enhancing them with the sub.
Takedown request View complete answer on diyaudio.com

Are 2 subwoofers always better than 1?

Dual subwoofers will greatly increase the available system headroom, providing greater dynamic range, reduced output compression, lower distortion, and less potential for overdrive artifacts. In short, running duals will give you cleaner, more accurate bass at extreme drive levels.
Takedown request View complete answer on svsound.com

Are two subs twice as loud?

The sound pressure level can be increased in the case of dual subwoofers. But it will not double the loudness. It will increase the low-frequency density. The pressure of the subwoofer will be reduced, as well as the distortion.
Takedown request View complete answer on hifireport.com

How do I connect my subwoofer to my main speakers?

Speaker Level Inputs
  1. Connect the subwoofer via the 'B' or second speaker output. ...
  2. For subwoofers equipped with a speaker-level input and a speaker-level output, simply connect the receiver speaker outputs to the speaker-level input on the subwoofer and the speaker-level output of the subwoofer to your speakers.
Takedown request View complete answer on uk.kef.com

How to connect subwoofer to amplifier without subwoofer output?

Connecting a Subwoofer to an amp with no subwoofer out
  1. Take out the pre-out / main in jumpers on the rear of your amplifier.
  2. Replace the jumpers with "Y" connectors. ...
  3. Connect one of the female sides back into the "main-in", while connecting the other side of the "Y" to the subwoofer.
Takedown request View complete answer on support.nadelectronics.com

Is it OK to play bass without an amp?

Yes, you can practice bass guitar without an amp. You can either use a practice amp or simply plug your bass into your computer and use headphones. There are several ways to play the bass without using an amplifier. In this section, we'll go over some of the most common alternatives to amps that you already own.
Takedown request View complete answer on fuelrocks.com

When not to use a subwoofer?

Thanks for visiting our premium content.
  • Five Reasons Not to Use Subwoofers (and why they are wrong)
  • Reason 1 – Subwoofers take up too much space.
  • Reason2 – Subwoofers don't blend well with mains.
  • Reason 3 – There's no music down there (20 – 80 Hz)
  • Reason 4 – Subwoofers are hard to hook up right.
Takedown request View complete answer on audiophilereview.com

Does subwoofer need to be near speakers?

Try to keep the sub within 4 or 5 feet of the left or right front speakers. Which leads to my next bit of advice, don't put the subwoofer in a corner. Granted, there are significant advantages to corner placement, mainly that in a corner the sub will produce more bass, with lower distortion.
Takedown request View complete answer on cnet.com

Should you hear a subwoofer?

Other things to note are, subwoofers are like children: they should be seen and not heard! If you can hear your subwoofer in a room, and be able to locate where the bass is coming from, then it's almost certainly too loud.
Takedown request View complete answer on expressiveaudio.com
Close Menu