How do I connect my controller to my game system?

Connect the controller using a USB cable

Depending on the type of controller you have, plug the micro-USB or USB-C cable into the power port on the back of the controller then plug the other end of the cable into your Xbox console.

Why is my controller not connecting to my console?

If you aren't able to connect to the console at all, replace the controller batteries with fresh ones and make sure the controller is powering on.

How do I get my Xbox to recognize my controller?

Why is my Xbox controller flashing and not connecting?

3. If Your Xbox One Controller Is Blinking. If you press the Xbox button on your controller and it blinks or flashes, this usually indicates that your controller isn't paired to a console. As mentioned above, this can happen when you pair the controller to another system and aren't in range of it.

Why is my Xbox controller not syncing to console?

Press and hold the Xbox button  on the controller for about 6 seconds to turn the controller off. Then press the Xbox button  to turn the controller back on. Re-pair the controller. Press and hold the Pair button  on the back of the controller (the Xbox button  on the controller will start flashing rapidly).

How to Connect a Game Controller to a PC

Where is the Xbox One Sync button?

First, locate the Connection button on the console. On the original Xbox One, you'll find that button on the left side of the console, near the disc tray. Step 3: On the Xbox One X and Xbox One S, the Connection button is on the bottom right corner of the front of the console, beneath the power button.

Why is my PS4 controller flashing blue and not connecting?

The battery is dying.

Plug the controller directly into the console to let it charge. It can take up to two hours for the battery to charge completely. If your PS4 controller won't charge, it could be an issue with the charging port, charging cable, or the battery itself.

What to do if your Xbox controller is on but not responding?

Controller isn't responding

Press and hold the Xbox button  on the face of the controller for about 6 seconds—this will turn the controller off. Press the Xbox button  again to turn the controller back on.

Why is my Xbox controller light blinking?

A blinking controller is trying to get your attention and alert you to an issue. It's usually weak batteries or because the controller is no longer paired. Recharging or replacing its batteries usually does the trick. If not, pairing the controller to your console again may resolve the issue.

Why is my controller light blue and not working?

What does the blue light on a PS4 controller mean? If you see a blinking blue light on the PS4 controller, don't worry. It means the controller is trying to pair itself with the console and has nothing to do with the dreaded blue light of death.

What is the dreaded blue light of death?

The "blue light of death" or "blinking blue light" or "pulsing blue light" is when you turn on your PS4 and the blue light turns on and blinks... actually it kind of pulses. There is no display on the TV (some TV's will just say "no signal" and it never goes to the white light.

How to reset PlayStation controller?

Locate the small reset button on the back of the controller near the L2 button. Use a small tool to push the button inside the tiny hole. Hold the button down for roughly 3-5 seconds. Plug in your console, connect your controller using a USB cable and press the PS button.

How do I resync my Xbox?

Where is the sync button on console?

To connect the controller and console without a cable, press and hold the sync button on top of the controller. Once the Xbox button starts flashing, push the Pair button on the console. On an Xbox One X and One S console, you'll find this button on the front, below the Power button.

Can you sync an Xbox One controller without the button?

Can You Sync Xbox Controllers Without Button? Yes, you can sync your Xbox controller without the sync button with a USB cable. Just insert the end of the cable into the slot of the remote and plug the USB into the port of the console.

How do I assign a controller to my Xbox One player 1?