How do I fix controller not connecting to PC?

Unplug all USB devices connected to your Xbox or PC (wireless hardware, external hard drives, other wired controllers, keyboards, and so on). Restart your Xbox or PC and try connecting the controller again.

Why won't my PC recognize my controller?

Without question, the very first thing you must do when you find out that your Windows PC is unable to recognize your gamepad is restart the gamepad. This is the same as turning the gamepad off, if it has an on/off button, and turning it back on. If that does not work, you can plug it into a different port.

How do I get my controller to work on my PC?

Turn on Bluetooth. Select Add Bluetooth or other device > Bluetooth (on Windows 11: Add device). Your PC will begin searching for your controller.

Why does my Xbox controller keep blinking and won t connect PC?

The batteries are low. Just plug in your controller to recharge its internal battery. Once it's charged, the blinking will stop. It's broken.

Why won't my controller Bluetooth to my PC?

Check your Bluetooth device

Make sure your device is turned on, is charged or has fresh batteries, and is in range of the PC you want to connect to. Then, try the following: Turn off your Bluetooth device, wait a few seconds, then turn it back on. Make sure your Bluetooth device is in range.

Controller Not Working On Windows 10/11? All Fixes In 8 Minutes

Why won't my PC detect my Xbox controller?

On your PC, press the Start button , select Settings > Devices > Bluetooth, choose Xbox Adaptive Controller, and then select Remove device. Make sure Bluetooth is On, then select Add Bluetooth or other device > Bluetooth and choose Xbox Adaptive Controller from the list. Restart your PC.

Why is my wireless controller not connecting?

Try pressing and holding the Xbox button on the controller to turn it back on. If that doesn't work, the problem might be due to a drained battery. If you're using a wireless controller, try changing the batteries or connecting its charging cable.

How do I resync my Xbox one controller to my PC?

Why isn't my Xbox controller pairing?

If you aren't able to connect to the console at all, replace the controller batteries with fresh ones and make sure the controller is powering on.

Why is my controller blinking and not connecting?

3. If Your Xbox One Controller Is Blinking. If you press the Xbox button on your controller and it blinks or flashes, this usually indicates that your controller isn't paired to a console. As mentioned above, this can happen when you pair the controller to another system and aren't in range of it.

How do I get my wired controller to work on my PC?

The most straightforward way to connect your Xbox controller and PC is with a micro-USB cable (for Xbox One controllers) or a USB-C cable (for Series X|S controllers). Simply plug the slim end into your Xbox controller and the other end into a USB port on your PC.

Why is my PS4 controller connected but not working PC?

If your PC is using an older version of Bluetooth or you have added the Bluetooth functionality using an external adapter, the PS4 controller might not be able to connect. Do not worry, as you can use a USB cable to connect. Make sure you have Steam or DS4Windows to support the controller before connecting the device.

How do I know if my PC can recognize a controller?

Test game controller input

If you hear the installing hardware chime on Windows 10, allow drivers for it to install. Open your browser and visit Gamepad Tester. Press any button on the controller to wake it up. The controller will be detected by Gamepad Tester.

How do I force my Xbox One Controller to connect?

Connect the controller wirelessly to Xbox One

Turn on your controller by pressing and holding the Xbox button . The Xbox button  will flash. When the button stays lit, the controller is connected. Note If the controller doesn't turn on, check the batteries.

How do I manually sync my Xbox One Controller?

Simply plug the cable into a USB port on the Xbox, then connect the other end to your controller. Once they're connected, press and hold the Xbox button on the controller to sync them. You can disconnect the cable to use the controller wirelessly after the syncing completes.

How do I connect my wired Xbox controller to my PC?

How do I reset my wireless controller?

Locate the small reset button on the back of the controller near the L2 button. Use a small tool to push the button inside the tiny hole. Hold the button down for roughly 3-5 seconds. Plug in your console, connect your controller using a USB cable and press the PS button.

How do I pair my wireless controller?

Can all controllers connect to PC?

Any controller that has two analog sticks, two shoulder buttons, and two trigger buttons, and is capable of connecting to your computer via USB, is usable with PC games. Some require more configuration than others, which we'll cover below.

How can I fix USB device not recognized?

How do I get my PC to recognize my PS4 controller?

The Bluetooth Method

Access the Bluetooth menu on your PC via the system tray. Click "Add Bluetooth or other device." Click "Bluetooth." Select the DualShock 4 controller from the list that pops up.

How do you sync a wired controller?

Insert the USB cable into a USB port on the Nintendo Switch Dock. Connect the other end of the cable to the wired controller. Your wired controller is now ready for use.

Why is my controller blinking blue but not turning on?

The battery is dying.

Plug the controller directly into the console to let it charge. It can take up to two hours for the battery to charge completely. If your PS4 controller won't charge, it could be an issue with the charging port, charging cable, or the battery itself.