How do I fix my controller only charging my computer?

If reinstalling drivers and changing cables doesn't help, you can try resetting your PS4 controller and pairing it with the computer again. Alternatively, you can try to fully charge the PS4 controller before connecting it to the computer.

Why is my Playstation controller not charging?

As we mentioned earlier, grime or a build-up of dust can cause issues when charging your PS4 controller. So, take a look at the charging port on the back of your PS4 controller. Use a wooden toothpick or some compressed air to gently clean the port and test the controller again to see if it charges now.

How do you fix your controller if it's not turning on?

Why is my PS4 controller not turning on at all?

If the battery is very low, then the controller will not have enough power to turn on. Plug the controller in to charge, until it is at 100% power. If this doesn't work, you may need to replace the battery.

How do I force my PS4 controller to turn on?

If your controller is turned off, press the PS button. After the light bar blinks, the player indicator lights up. When your controller has enough battery life, you can disconnect the USB cable and use your controller wirelessly.

Controller Not Working On Windows 10/11? All Fixes In 8 Minutes

How do I reset an unresponsive PS4 controller?

Locate the small reset button on the back of the controller near the L2 button. Use a small tool to push the button inside the tiny hole. Hold the button down for roughly 3-5 seconds. Plug in your console, connect your controller using a USB cable and press the PS button.

How do I reset my power controller?

Hold the assign button down for 2 seconds. The PowerA logo will slowly flash, signaling the controller is in assign mode. Press and hold the assign button for 5 seconds to reset to no function.

How do you reset a controller?

Why does my Xbox controller never charge?

Troubleshooting. If your rechargeable battery pack doesn't charge when you connect the wireless controller to the console with a USB cable, it might have worn out (as all rechargeable batteries do). The length of time that a rechargeable battery lasts depends on how often you recharge it.

Why is my Xbox controller not working when plugged in?

The cable could be worn out or broken. Make sure it's securely plugged in on both ends. If that's not the issue, unplug it from the Xbox One and plug it into a different USB port on the console. If the controller still won't turn on, disconnect the Play & Charge cable and try a different micro USB cable.

Why is my controller blinking and not charging?

First, try resetting the controller and replacing the cable. If that doesn't fix the problem, you might need to use a different controller. If you're sure the battery or charging port on your controller is defective, you can replace it.

Why is my PS4 controller blinking and not charging?

There are two main reasons you might see the flashing white light on your DualShock controller: either the battery is dying, or the controller failed to connect to your PlayStation console.

How long does a PS4 controller last?

Typically, the DualShock 4 lasts for four to eight hours of play per charge (typically on the lower end of that range), far less than the Xbox One controller or the Nintendo Switch Pro controller. Why does the DualShock 4 battery die so quickly?

How do I connect my PS4 controller without USB?

Is there a reset button on a power supply?

Please note: To reset the power supply you need to turn it Off first (On/Off switch to “O” position) and then after waiting a short while, turn it back on again (On/Off switch to “I” position) If your power supply still does not function properly, you can check its functionality by yourself with a simple 'paperclip' ...

Where is the power reset button?

Alternatively called the reset switch, the reset button allows devices that utilize it, such as a computer or peripheral to be rebooted. Usually, the button is on the front of the device, next to or near the power button.

What is a hard power reset?

Generally, a hard reset is initiated by pressing a dedicated reset button, or holding a combination of buttons on some mobile devices. Devices may not have a dedicated Reset button, but have the user hold the power button to cut power, which the user can then turn the computer back on.

How do I reset my Xbox One controller on my PC?

Re-pair the controller.

Press and hold the Pair button  on the back of the controller (the Xbox button  on the controller will start flashing rapidly). On your PC, press the Start button , select Settings > Devices > Bluetooth, choose Xbox Adaptive Controller, and then select Remove device.

Why is my PS4 controller not working but the blue light is on?

If you see a blinking blue light on the PS4 controller, don't worry. It means the controller is trying to pair itself with the console and has nothing to do with the dreaded blue light of death.

Why is my PS4 controller connected but not working PC?

If your PC is using an older version of Bluetooth or you have added the Bluetooth functionality using an external adapter, the PS4 controller might not be able to connect. Do not worry, as you can use a USB cable to connect. Make sure you have Steam or DS4Windows to support the controller before connecting the device.

How do I factory reset my PS4 power button?

Hold the power button down until you hear two beeps, which will allow it to boot in Safe Mode. Step 4: Choose Initialize PS4 (Reinstall System Software) on your PS4. From there, follow all the prompts from your PS4. As you go through, the console will wipe everything, including system software.