How do I force my PS4 controller to use USB?

Connect via USB

The easiest way to connect the PS4 controller to your PlayStation is with a USB cable. Turn on the PS4 with the button on the PlayStation itself. Connect the USB cable to one of the USB ports on the PS4. Connect the micro USB side of the cable to the port at the top of your PS4 controller.

Why won t my PS4 controller connect through USB?

If your PS4 controller won't connect, try a different USB cable, in case the original one has failed. You can also reset the PS4 controller by pressing the button on the back of the controller. If your controller still won't connect to your PS4, you might need to get support from Sony.

How do I connect my PS4 controller without Bluetooth?

To reconnect your wireless controller to your PS5 console or PS4 console, connect it with a compatible USB cable and press the PS button on the wireless controller. You can then remove the USB cable and use the controller wirelessly.

Why is my PS4 controller flashing blue and not connecting?

The battery is dying.

Plug the controller directly into the console to let it charge. It can take up to two hours for the battery to charge completely. If your PS4 controller won't charge, it could be an issue with the charging port, charging cable, or the battery itself.

How do I fix my controller not connecting to my USB?

Unplug all USB devices connected to your Xbox or PC (wireless hardware, external hard drives, other wired controllers, keyboards, and so on). Restart your Xbox or PC and try connecting the controller again.

How To Fix PS4 Safe Mode Loop - Cannot start the PS4 Fix

Why is my controller not syncing?

If your Xbox controller won't connect, you should first make sure the batteries aren't dead. You can also try updating your Xbox One controller and console to fix the issue. Check that there are no interfering objects or devices, and move or disconnect them if necessary.

Why is my controller not connecting and blinking?

The batteries are low. Just plug in your controller to recharge its internal battery. Once it's charged, the blinking will stop.

How do I enable USB controller?

How do I force a USB to recognize?

How do I reset my USB controller?

Why is my USB port not working?

USB-related issues can be caused due to incompatible device, outdated, incorrect, or corrupt drivers, damaged USB ports or cables, faulty USB port, and so on.

How do I manually fix my USB port?

Why is my USB recognized but not showing up?

There are many methods for making an unrecognized USB drive show up on a PC: update the USB flash driver, change drive letter, use Windows' built-in Disk Management tool to detect the USB, and more.

How do I reset my PS4 controller?

Locate the small reset button on the back of the controller near the L2 button. Use a small tool to push the button inside the tiny hole. Hold the button down for roughly 3-5 seconds. Plug in your console, connect your controller using a USB cable and press the PS button.

How do I reset my PS4 controller without the reset button?

Power down the PS4. Turn over the DualShock 4 controller and locate the small hole near the left shoulder button. Unfold one end of the paper clip and insert it to push the button buried inside the hole. Hold down this button for about 5 seconds.