How do I get my controller to work on my switch?
Wireless pairing procedure
- Select "Controllers" on the HOME Menu.
- Select "Change Grip/Order".
- Hold the SYNC Button on the controller you want to pair. (Release the button once the controller LED starts flashing.) ...
- When the message "Paired" appears on the screen, the pairing is complete.
Why is my Nintendo Switch not responding to my controller?
Try pressing the SYNC Button on each of your controllers several times and check if this resolves the issue. * Pressing the SYNC Button will interrupt the controller's wireless communication with the console. Reconnect the controller by pressing one of the directional or A/B/X/Y Buttons.How do I get Switch to recognize my controller?
Is the controller connected? →Open Controllers on the HOME Menu to check what controllers are currently connected. If the controller is not being recognised by the console, select "Change Grip/Order" to reconnect it.Why is my Joy-Con not connecting wirelessly?
Try resetting your controller, or if you have more than one, try resetting one controller at a time. Detach the Joy-Con controllers from the side of the device. Take one of the controllers and press the small, pin-sized Sync button on the top or side, then press any other button on the controller to restart it.How do you reset the Switch controller?
Reset the Pro Controller by pressing the SYNC Button once, then press any other button to wake it up again. Test the button input on the Pro Controller.Easy Way To Use Your PS4/Xbox One Controller On Your Nintendo Switch Wireless
Why is my Nintendo Switch controller blinking?
When your controller is connected to a console, the player LEDs indicate the controller number. Also, when attempting to connect to the console or when remaining battery charge is low, the LEDs will flash.How do I fix my controller not responding?
My controller won't connect to my console or PC
- Step 1: Connect your controller. ...
- Step 2: Power cycle your console. ...
- Step 3: Check your controller batteries. ...
- Step 4: Connect your controller to the console with a USB cable. ...
- Step 5: Update your controller.
How do I completely reset my controller?
Locate the small reset button on the back of the controller near the L2 button. Use a small tool to push the button inside the tiny hole. Hold the button down for roughly 3-5 seconds. Plug in your console, connect your controller using a USB cable and press the PS button.Why is my Nintendo Switch controller not working or charging?
Reset the AC adapter by leaving it unplugged from both ends for at least 30 seconds. While performing this step, verify you are using the Nintendo Switch AC adapter (model No. HAC-002) and check for any cuts, kinks, frayed cables, etc.Why did my Joy-Con suddenly stop working?
Ensure the Joy-Con have the latest controller firmware installed. Remove any skins or covers from the problematic Joy-Con, if any, and calibrate the control sticks. If the issue is occurring with a specific game or application, try the following: Check for any available software updates for that game.How do you resync switch joy cons?
From the HOME Menu, select Controllers, then Change Grip and Order. While the following screen is displayed, press and hold down the SYNC Button for at least one second on the controller you wish to pair. Once paired, the player LED(s) corresponding to the controller number will remain lit.How do I know if my Nintendo Switch controller is done charging?
It takes approximately six hours in order for the Nintendo Switch Pro Controller to fully charge. Once the Pro Controller is fully charged, the recharge LED beside the USB connector will shut off.Why has my controller disconnected?
If your Xbox controller keeps disconnecting, then you might just need to update the firmware. To check whether your controller has the latest firmware, go to Profile & system > Settings > Devices & connections > Accessories. This will allow you to check whether the firmware is up-to-date.Why is my controller not turning on?
Batteries: The most common reason an Xbox One controller fails to turn on has to do with the batteries. If the batteries are worn out or in need of a charge, it won't turn on. It also won't turn on if the batteries are installed improperly.Where is reset button on Move controller?
Reset PlayStation Move motion controllerPress and hold the reset button on the back with a fine-tipped pen to reset the motion controller.
Why is my controller flashing but not working?
Check the controller for problems like loose connections or malfunction. If the controller is out of sync with the console, sync it up again. A blinking controller could also be caused by cable interference, an overheated console, a broken controller, among other things.Why is my controller not connecting and blinking?
The batteries are low. Just plug in your controller to recharge its internal battery. Once it's charged, the blinking will stop.Why is my controller blinking blue but not connecting?
The battery is dying.Plug the controller directly into the console to let it charge. It can take up to two hours for the battery to charge completely. If your PS4 controller won't charge, it could be an issue with the charging port, charging cable, or the battery itself.
← Previous question
Can you share games between switches?
Can you share games between switches?
Next question →
Can Switch Lite use game cards?
Can Switch Lite use game cards?