Skip to main content

How do I get my Wii U to read discs?

Cleaning the console with a lens-cleaning kit is your first step if the console isn't reading discs at all. The problem may be a dirty lens. If cleaning the lens doesn't help, perform a system update. If cleaning and updating don't do anything, contact Nintendo.
Takedown request View complete answer on lifewire.com

How do you fix a Wii U that won't read discs?

Remove the disc and reboot the system:
  1. Eject the problematic disc if it is still in the system.
  2. Power the system off and ensure it is placed correctly.
  3. After 30 seconds has passed, power the Wii U back on.
  4. Insert the disc. Be sure to verify you are inserting it correctly.
Takedown request View complete answer on en-americas-support.nintendo.com

How do you clean the lens on a Wii U?

Dab a little of the included cleaning liquid on the little bristles, put the disc in, select the disc and the Wii U will go into a self-cleaning mode (around 20-30 seconds), repeat as needed. It took three tries before the console started recognizing discs again, but it has worked perfectly ever since!
Takedown request View complete answer on amazon.com

How do I clean my Wii U disk reader?

Dampen a clean, soft, cotton cloth with water. Use straight strokes and wipe the disc (non-labeled side) from the inside rim to the outside rim. Using a dry part of the cloth, repeat step 2 to dry the disc.
Takedown request View complete answer on en-americas-support.nintendo.com

Can you fix disc reader on a Wii?

Most disc read errors (DREs) can be fixed by replacing the laser lens in your Wii's DVD drive.
Takedown request View complete answer on ifixit.com

Wii U Invalid Disc Fix - Disc Drive Repair - Grinding Noise

How do you fix a disc that won't read?

Check the Disc

Clean your discs – Grime and dirt can make it hard for the drive laser to read small groves located on your disc. If the disc is dirty, you can try cleaning it with filter water and a clean cloth; or better yet, a specialized disc cleaning solution and cloth can be purchased in most electronic stores.
Takedown request View complete answer on driversupport.com

How do you clean a laser lens on a Wii?

You put 2-3 drops of the supplied cleaning fluid on the pad, then insert the paddle into the Wii's disc slot. You wiggle the handle 10-20 times to clean the lens. Press the Eject button to remove the paddle, and you're done.
Takedown request View complete answer on amazon.com

How do you clean a disc reader lens?

Step 3 Laser Lens Cleaning
  1. Locate the lens on the disc drive.
  2. Make sure that there is no dust on or near the player and area you are working on. ...
  3. Dip one end of a cotton swab in rubbing alcohol.
  4. Lightly dab the swab on the lens. ...
  5. Let the lens dry before replacing the top plate of the DVD player.
Takedown request View complete answer on ifixit.com

Can you use alcohol to clean a Wii disc?

Remove fingerprints and grease with rubbing alcohol.

Apply a dab of isopropyl alcohol to a clean cloth, and rub the disc from the center to the rim. Carefully wipe off moisture with a dry cloth with the same motions, then let sit for two minutes so it is completely dry.
Takedown request View complete answer on wikihow.com

Can you clean discs with rubbing alcohol?

If the disc has a heavy accumulation of dirt, try rinsing it with water first. Use commercially available water-based detergent formulated for cleaning the surface of optical discs. Use isopropyl alcohol or methanol, as an alternate to water-based detergents, to clean the disc surface.
Takedown request View complete answer on clir.org

Does Nintendo still make the Wii U?

Nintendo will close the Wii U and 3DS eShops on March 27th, 2023.
Takedown request View complete answer on theverge.com

What is the best way to clean a Wii U screen?

Slightly dampen a soft, cotton cloth with water ONLY and wipe off the screen. Using a dry portion of the same cloth, wipe the screen dry. Using a loop of transparent tape, dab at any remaining dust or smudges. Repeat if necessary.
Takedown request View complete answer on en-americas-support.nintendo.com

How do I know if my Wii is bricked?

If the System Menu boots fine, then the brick is simply a semibrick. If the health screen is the last screen seen, then the brick is either a banner brick or a mail brick. To test this, hold + and - when pressing A; if the system still refuses to boot, it is a banner brick, otherwise it is a mail brick.
Takedown request View complete answer on wiibrew.org

Why can't I play Wii games on my Wii U?

Yes, you can. As Wii U has backwards compatibility with Wii games, it's possible to play Wii games and use Wii accessories on Wii U. Actually, nearly all Wii games can be played on Wii U by inserting the relevant disc or by downloading the game from WiiWare or Virtual Console.
Takedown request View complete answer on partitionwizard.com

Why don't Wii U games work on Wii?

But the Wii console cannot run a Wii U game as it is not capable to do so. Most Wii U games have a Gamepad requirment. As Wii doesnt support you with a gamepad. You will not be able to play it.
Takedown request View complete answer on quora.com

Does toothpaste fix Wii discs?

Toothpaste works best for shallow scratches and scuffs on the reflective side. It will probably not work on a deep scratch. Scratches on the non-reflective label side should never be rubbed, and may have caused irreparable damage. If you have deep scratches, consider sending the disk to a disk repair service.
Takedown request View complete answer on wikihow.com

How do you clean a Wii U disc with toothpaste?

First, squeeze a moderate amount of toothpaste (a little more than you'd place onto your toothbrush) and evenly rub it onto the disc in straight lines from the center to the edge. (Remember what we said about forgoing circular wiping motions?).
Takedown request View complete answer on home.howstuffworks.com

Can you clean a disc with Windex?

Spray the dvd with Windex glass cleaner. Carefully wipe it dry with a clean microfiber cloth. Your dvd is now clean, and ready for use!
Takedown request View complete answer on instructables.com

How do you fix a dirty lens?

Remove as much dust and dirt as possible from the lens with a blower or soft-bristled brush. Apply a few drops of lens cleaning solution to a lens tissue or cleaning cloth. Using a circular motion, gently remove oil, fingerprints, and grime from the lens surface, working from the center outward.
Takedown request View complete answer on bhphotovideo.com

Can I use lens wipes to clean a disc?

Do not use solvents such as benzine, thinner, commercially available disc or lens cleaners, or anti-static spray intended for vinyl record LPs. Using liquid cleaners can damage the disc contents. NOTE: Dust, fingerprints or scratches may cause the disc to malfunction.
Takedown request View complete answer on sony.com

What is a lens cleaning kit for a Wii?

The Wii Lens Cleaning Kit is a tool that can be used to keep the Wii console lens clean and free of dust.
...
The Wii Lens Cleaning Kit includes:
  • 1 Lens Cleaner paddle.
  • 1 bottle cleaning fluid.
  • 6 Cleaning Pads (one on the Lens Cleaner, plus 5 extra)
  • Instruction Manual.
Takedown request View complete answer on en-americas-support.nintendo.com

How do you clean a dirty laser lens?

  1. Step 1: Preparation. Blow off lint and dust with a blower or compressed air. Have some detergent and wipes on hand. Move the working table upward. ...
  2. Step 2: Detergent and wipes. Remove the lens and rinse it with cleaning fluid. Place a drop of cleaning fluid on the lens and leave it on for about 1 minute.
Takedown request View complete answer on troteclaser.com

Can you use acetone to clean laser lens?

Hold a piece of lens tissue above the mirror and place a few drops of acetone on the paper. Lower the lens tissue onto the optic and pull it over the surface. Note that the dry part of the tissue helps remove acetone residue. Repeat the above step until the optic is clean.
Takedown request View complete answer on twi-global.com
Close Menu