How do I pair my PS4 controller?

While pressing and holding the SHARE button, press and hold the PS Button until the light bar flashes. Enable Bluetooth on your device, and then select the controller from the list of Bluetooth devices. When pairing is complete, the light bar blinks, and then the player indicator lights up.

How do you sync a PS4 controller to a PS4?

Why is my PS4 controller not connecting?

If your PS4 controller won't connect, try a different USB cable, in case the original one has failed. You can also reset the PS4 controller by pressing the button on the back of the controller. If your controller still won't connect to your PS4, you might need to get support from Sony.

Why is my PS4 controller flashing blue and not connecting?

The battery is dying.

Plug the controller directly into the console to let it charge. It can take up to two hours for the battery to charge completely. If your PS4 controller won't charge, it could be an issue with the charging port, charging cable, or the battery itself.

How do I connect my PS4 controller without cable?

You'll need to use a connected controller or a keyboard to put your PS4 into pairing mode. Go to "Settings" → "Devices" → "Bluetooth Devices" to enter pairing mode. On the controller, press the "SHARE" button and PlayStation button until the lightbar flickers. Select the controller.

How to PAIR your NEW PS4 Controller to your Playstation (2 Methods)

What is the blue light of death?

The "blue light of death" or "blinking blue light" or "pulsing blue light" is when you turn on your PS4 and the blue light turns on and blinks... actually it kind of pulses. There is no display on the TV (some TV's will just say "no signal" and it never goes to the white light.

Why is my new PS4 controller flashing white?

There are two main reasons you might see the flashing white light on your DualShock controller: either the battery is dying, or the controller failed to connect to your PlayStation console.

Why is ps4 controller orange?

Usually, the orange light on PS4 controller means that your console is charging or in Rest Mode.

How to reset PlayStation 4?

To restore system software to its default settings, select (Settings) > [Initialisation] > [Restore Default Settings], and then follow the on-screen instructions.

What do the lights on the ps4 controller mean?

The light bar on the controller is used to identify the player in the game. Player 1 is blue, player 2 is red, player 3 is green, and player 4 is pink. [n] If you disconnect your DualShock 4 and for some reason the light turns white, hold the ps button for 15 seconds and the controlller will reset.

Why can't I press the PS button on my controller?

It may have jammed. Try opening up the ps4 and taking out the button to see if there is any damage and then put it all back together to see if it works. If not, the battery may have run out of charge. Try getting a new battery.

Why is my PS4 blinking white and not connecting?

If the indicator light only blinks white, or if the blue light never transitions to solid white, the console is frozen and needs troubleshooting. Follow the troubleshooting steps below: Unplug the console. Wait 60 seconds, plug the console back in, and turn it back on.

What to do when your PS4 controller blinks twice then turns off?

The easiest solution is to reset it using. To do this, there is a small hole on the back of the controller. You can use a toothpick or a paperclip to press the reset button, then resync it.

Why is my new PS4 controller flashing yellow?

What does a yellow light mean on a PS4 controller? Damage of USB connectors – If a USB cable is faulty or improperly connected, a yellow light will appear on your DualShock controller if you use one. Still, you can quickly resolve this issue by changing your damaged USB connector for a new one.

Why won't my controller pair with my console?

If you aren't able to connect to the console at all, replace the controller batteries with fresh ones and make sure the controller is powering on.

Why is my PS4 white?

Check HDMI and TV Connection

Since the PS4 light of death error's main cause can be a loose HDMI cable, the first thing you should do is check the video output port of your PS4 and TV and the integrity of the cable.

How do I reset my PS4 controller to factory settings?

Highlight the controller you want to reset, press the Options button, then select Forget Device. For a hard reset, use a straightened paperclip to press the button inside the small hole on the back of the controller for five seconds.

Why is my PS4 solid white?

Does your PS4 turn on and show the white light but not show anything on the TV? This is what's known as the "white light of death" or WLOD. The bad news is that your PS4 is likely broken and in need of repair.

What to do if your PS4 controller is not responding?

In case your controller isn't cooperating, press and hold the Power button on your PS4 console until you hear two beeps. This will fully shut it down—once it's powered off (with no lights on the front), press the Power button again to turn it back on.

How do I register my PS4 controller after resetting it?

Release the reset button and wait a few more seconds. Then plug in the controller using the Micro-USB cable. Press the PS button. When the light bar on the controller turns blue, it should be paired, and you can log on to your PS4.