How do I put my Razer Kraken headset in pairing mode?

Start with the headset powered off. Ensure there is enough battery power then press and hold the Power button for about five seconds until the indicator light next to the Power button blinks blue (you will hear two audible cues: first “Power On” then second “Pairing”). Your headset is now in Bluetooth pairing mode.

How do I pair my Razer gaming headset?

Why is my Razer Kraken headset not connecting?

If the device is working properly on a different computer, have the USB port on your PC checked by the manufacturer or a reputable technician. Ensure the device is properly plugged in and connected directly to the computer and not through a USB hub. Clean reinstall your Razer Synapse 2.0 if the issue persists.

How do I connect my Razer Kraken wireless headset to my PC?

Why is my Razer Bluetooth headset not connecting to my PC?

Restart your Razer Blade and your Bluetooth device. Reinstall your Bluetooth driver if the issue persists. Go to “Device Manager” and select “Bluetooth”. Right-click the Bluetooth driver “Intel(R) Wireless Bluetooth(R)”.

Setup and Fix - Razer Kraken X

Why won't my wireless headset connect to my PC?

Make sure your Bluetooth device is turned on, is charged or has fresh batteries, and is in range of your PC. Then, try the following: Turn off your Bluetooth device, wait a few seconds, then turn it back on. Make sure your Bluetooth device is in range.

How do I put my Razer Kraken v3 Pro in pairing mode?

While powered on, press the Bluetooth or Multi-function button until the status indicator is lit or until you hear a tone to activate Bluetooth pairing mode. Follow your device's instructions to pair it with your headset. Once the headset is paired, the status indicator will briefly change to static blue.

How do I reset my Razer Kraken headset?

Right-click on the speaker icon on the system tray and select “Open Sound settings”. Click “Sound Control Panel” under “Related Settings”. Right-click on the Razer headset and select “Set as Default Device”.

How do I reset my Razer wireless headphones?

How do I put my Razer Bluetooth in pairing mode?

Push the slider switch to Bluetooth mode. Press and hold the two side buttons and the DPI stage up button simultaneously for three seconds to activate pairing mode. The Razer logo will blink twice in repeated intervals to show that the device is in pairing mode.

How do I reset my Bluetooth headset manually?

How do I reset my Razer device?

Why is my Bluetooth Razer headphones flashing blue?

Blue light blinking means there is no audio signal coming in to the headset.

What is the button for on Razer Kraken?

The THX button on the back of the left earcup can be used to toggle THX Spatial Audio on or off. The white LED indicator lights up when THX Spatial Audio is enabled.

Why is my Kraken Ultimate headset not working?

Check if the cable has dust or any visible signs of damage that might prevent the Razer Kraken Ultimate from connecting to your computer. If the cable has debris it might not be able to connect to the computer, try lightly blowing on the plug to remove dust and plug it in again.

Can I reset my Razer headset?

Using a USB sound card, you can add more volume and enhance your voice output with Razer Synapse. You can reset the firmware on your headphones by pressing and holding the power button. As you press the power button, your headphones should be connected to the USB-C port.

Why is my Bluetooth not pairing?

Charge up both devices you're trying to pair

Some devices have smart power management that may turn off Bluetooth if the battery level is too low. If your phone or tablet isn't pairing, make sure it and the device you're trying to pair with have enough juice.

How do I fix the Bluetooth pairing problem?

Why won't my headphones show up on Bluetooth?

Try these steps first

Turn your Bluetooth accessory off and back on again. Make sure that your Bluetooth accessory is on and fully charged or connected to power. If your accessory uses batteries, see if they need to be replaced.

How do I connect my Razer Kraken BT Kitty Edition to my computer?

How do I check the battery on my Razer Kraken?

While unplugged, your Razer Kraken BT Kitty Edition will briefly show its battery level on the status indicator when you power on the headset. While in use, an audio prompt will be heard when the battery needs recharging.

What is the blue light on my headset mean?

If the Headphone Source LED is off, the main mixer output is sent to the headphones. If the LED is solid blue, the return signal is being sent to the headphones. If the LED is flashing blue, computer audio is being sent to the headphones (via USB).

How do I connect my Razer device?

Why is my Razer blinking?

Flickering or flashing on displays are usually caused by outdated drivers or incompatible applications. This can be fixed by keeping your software updated.