How do I soft reset my PS4 controller?

Locate the small reset button on the back of the controller near the L2 button. Use a small tool to push the button inside the tiny hole. Hold the button down for roughly 3-5 seconds.

How do I calibrate my PlayStation 4 controller?

Press L2 and R3 to max physical distance 3 times in a row, and rotate both joysticks with max physical distance 3 times (LED will turn off). Tap the Share button once, the LED will flash Green 3 times then turn off. This means the calibration been successfully completed.

How do I force my PS4 controller to connect?

Press and hold the PlayStation button for 3 seconds. Press and hold the 'Share' button, above the arrow buttons, and the PlayStation button at the same time. The light bar should blink now. Select your controller in the Bluetooth window of your PlayStation.

How do I resync my PS4 controller to my PS4?

On the PS4 controller you wish to sync, hold down the PS button and the Share button simultaneously for 5 seconds. When the new controller appears in the list of Bluetooth device, select it with the other controller. The new controller will then be synced with your PS4.

Why won't my PS4 controller connect even after reset?

If your PS4 controller won't connect, try a different USB cable, in case the original one has failed. You can also reset the PS4 controller by pressing the button on the back of the controller. If your controller still won't connect to your PS4, you might need to get support from Sony.

How to Reset PS4 Controller

Why is my PS4 controller flashing blue and not connecting?

The battery is dying.

Plug the controller directly into the console to let it charge. It can take up to two hours for the battery to charge completely. If your PS4 controller won't charge, it could be an issue with the charging port, charging cable, or the battery itself.

Why is my controller not connecting and blinking?

The batteries are low. Just plug in your controller to recharge its internal battery. Once it's charged, the blinking will stop.

Why is my PS4 controller flashing white and wont connect?

The PS4 controller flashing white issue is generally caused by two reasons. One is because of the low battery, and that means that you need to charge your PS4 controller to make it back on track. The other reason is that your controller is trying to connect to your PlayStation 4, but failed due to unknown factor(s).

Does resetting PS4 controller fix drift?

Sometimes a simple reset can get your controller working again. Unplug and turn off your DualShock controller. Find the reset button on the back of your controller near the L2 button. Use a small tool (like a paperclip) to push and hold the reset button for at least 5 seconds.

What does the light on the PS4 controller mean when charging?

While the system is in rest mode, the light bar slowly blinks orange. When charging is complete, the light bar turns off. It takes approximately 2 hours to charge the controller when the battery has no remaining charge.

Is there a ps4 controller app?

With PS Remote Play, you can: Display the PlayStation®5 or PlayStation®4 screen on your mobile device. Use the on-screen controller on your mobile device to control your PS5 or PS4.

How do I resync my PS4 controller without cable?

You'll need to use a connected controller or a keyboard to put your PS4 into pairing mode. Go to "Settings" → "Devices" → "Bluetooth Devices" to enter pairing mode. On the controller, press the "SHARE" button and PlayStation button until the lightbar flickers. Select the controller.

How do I know if my PS4 controller is pairing?

While pressing and holding the SHARE button, press and hold the PS Button until the light bar flashes. Enable Bluetooth on your device, and then select the controller from the list of Bluetooth devices. When pairing is complete, the light bar blinks, and then the player indicator lights up.

Why is my PS4 controller orange and not working?

Usually, the orange light on PS4 controller means that your console is charging or in Rest Mode.

How do I soft reset my controller?

Locate the small reset button on the back of the controller near the L2 button. Use a small tool to push the button inside the tiny hole. Hold the button down for roughly 3-5 seconds. Plug in your console, connect your controller using a USB cable and press the PS button.

Why did my controller just stop working?

Your controller needs new batteries. The firmware in your controller needs to be updated. Your controller is too far away from the gaming console. There are too many devices connected to your gaming console.

Why is my ps4 controller pulling left?

Another trick to solve the stick drift of your PlayStation controller is to press the analog sticks. Press and hold both analog sticks of your controller for 10 seconds. Then, keep the analog joysticks up and blow in the opening you create by doing this. Rotate both joysticks clockwise for 10 seconds.