How do you hook up a DVD player to a TV that has no yellow input?

Connect one side of an HDMI cable to the back of the DVD player. The other side of the HDMI cable connect it to an available input on your TV. Turn on the DVD player, and using the TV's remote, select the corresponding input. At this point, you should see the DVD Player logo on your TV screen.

What if my TV doesn't have a yellow port?

Important: Some newer TVs do not have the traditional yellow video input, known as an AV connection. Even without that input, you should be able to use the standard three-color Wii AV Cable that came with the system.

Do you need the yellow cord for the DVD player?

Be sure to insert the plugs into the terminals with corresponding colors. The red and white plugs are for sound, the yellow is for video. Plug the DVD player's power cord into an electrical outlet in the wall.

How do I get my TV to recognize my DVD player?

Ensure the video cable between the DVD player and TV is securely connected to both devices. NOTE: For best picture quality, use an HDMI, DVI, Component Video, or S-Video cable if both the TV and DVD player have one of these connection types.

How do I connect an old DVD player to a new TV?

How To Hookup Your Old DVD Player To Smart TV

How do you hook up a DVD player to a TV without HDMI?

Connect the composite video cable (Yellow RCA) to the DVD player. Next, connect the White and RED audio RCA cables to the corresponding connectors on the back of the DVD player. Take the other side of the composite cable and audio cables and connect them to your TV.

How do I connect my cable box and DVD player to my TV with HDMI?

Find the "HDMI OUT" (or similarly labelled) slot on the back of the cable box and plug one end of the HDMI cable into it. Plug the other end of the HDMI cable into your TV. If you only have one HDMI port on the back or side of your TV, make sure that you're using it for your cable box.

Why is my TV saying no signal with my DVD player?

Check the input selection of your TV to ensure it's set for the input connection used by the source device (cable box, satellite, DVD, Blu-ray Disc player). On your TV remote, press the Input, Source, or TV/VIDEO button to toggle you through your input connection options to ensure the correct connection is selected.

Why is there no Colour when I connect my DVD player to my TV?

This issue can occur if a video signal encrypted with copyright protection passes through a VCR. If using A/V cables, check that the red, white, and yellow plugs are securely connected to the same colored jacks on both the disc player and TV (or A/V receiver).

Why does my TV say no signal when everything is plugged in?

A "No Signal", "No Source", or "No Input" message will appear on your TV screen if the TV is not receiving a signal from your TV box. This is often a result of either the TV box being powered off, not being properly connected to the TV, or the TV being set to the wrong input.

What input do you put a DVD player on?

HDMI connection

For optimum picture quality, we recommend connecting your player to the TV using an HDMI cable. If your Blu-ray/DVD player has an HDMI jack (socket), connect it using an HDMI cable. Be sure to use an authorised HIGH SPEED HDMI cable bearing the HDMI logo.

Where does the yellow cable go?

To connect you will need a Composite video cable. This cable has a yellow plug for the Video connection and a red and white plug for Audio connection.

What color wires for DVD player?

The order of colors should be Green, Blue, Red (video), White, Red (audio). Some component cables only have the Green, Blue, and Red video plugs. You will need a separate Red and White plug audio cable in order to hear your DVDs, like the one found in the A/V section above.

What do I connect the yellow wire to the TV?

The yellow cable is for composite video and is responsible for video signal. It carries the analogue video signal with no audio data. Choosing not to plug this in would result to black-and-white video.

What is the yellow TV input?

They are often color-coded, yellow for composite video, red for the right audio channel, and white or black for the left channel of stereo audio.

What is the yellow cable for?

Yellow Ethernet cables are generally used for what is called “power over Ethernet” (POE). This means that your cable can supply both electrical power and data in one connection.

What to do when your TV has no color?

First, confirm that the source is actually in color - try another channel or input device. Next, check the settings of the color control - it may have accidentally been turned down. If your TV has some kind of automatic picture mode, try turning if off and adjusting the color control.

What input should my TV be on?

HDMI, or “High-Definition Media Input,” is the go-to port for all your modern devices. HDMI ports in your TV are used for both video and audio.

What causes no signal?

Generally, a 'no signal' message signifies an issue with reception; the TV is not receiving anything from the cables or the antenna. In a nutshell, this simply means that your service (satellite or cable) is not able to display movies and shows.

What causes a DVD not to play?

Use a soft cloth to clean the disc ; the disc may have fingerprints or smudges. Examine the disc for any cracks or scratches that might be interfering with playback. Make sure the disc playback is not restricted by parental control options. Make sure the DVD disc is compatible with the player.

How do I connect my DVD and AV cable to my TV?

Make sure that your TV's power adapter is unplugged and the DVD or Blu-ray player is turned off. Connect an AV cable (not provided) to the green VIDEO / Y jack and L and R AUDIO jacks on the back of your TV and to the AV OUT jacks on the DVD or Blu-ray player.

Do I connect a DVD player to the TV or cable box?

You connect your DVD player to your TV. Your cable box is also connected to the TV. If you choose to use HDMI for both of these your TV will need to have multiple HDMI connections. Most modern TV's now have at least 2 HDMI ports and most have more than that.

How do I connect my DVD player to my TV without RCA?

Look for an HDMI plug port on both units. If none exist, look for an Svideo plug and an audio (earplug or headphone) jack and connect them both to the TV. If your DVD player has a coax cable connector, that can also be used.

What wire goes to what color?

The black wire is the "hot" wire, it carries the electricity from the breaker panel into the switch or light source. The white wire is the "neutral" wire, it takes any unused electricity and current and sends it back to the breaker panel.