How do you maintain a cue shaft?

A simple maintenance routine involves cleaning the shaft using a non-abrasive cloth to remove oil and dirt deposited on it. Clean the shaft after every few games. Burnishing the cue shaft will ensure the cue stays slick, and regular maintenance will keep the shaft gliding smoothly.

What is the maintenance of a pool cue?

Wipe cue down with a damp cloth and dry. Do not use a lot of water or this can cause the cue to swell. Apply oil onto cue with a cloth or paper towel, leave overnight to soak in. Wipe off surplus oil and buff cue with clean cloths until smooth and dry and no residue oil is visible on a clean cloth.

What is the best pool cue shaft cleaner?

Cue Doctor Cue Cleaner and Conditioner will leave your pool cue shaft clean, smooth, and protected · It is recognized as the most effective cue shaft cleaner on the market.

Should you wax a pool stick?

Keeping It Slick and Smooth:

Your shaft will keep the slick feel for several weeks of play. Cue Wax, like the Cue Doctor Wax, will also keep your shaft slick and shinny, sealing off the pores and protecting the wood.

Why do cue balls turn yellow?

Most billiard balls are made of hard plastic materials that are resistant to cracking and chipping. As sometimes happens with plastics, over time exposure to UV light, combined with exposure to heat and oxygen, can cause a process called photodegradation through photooxidation.

HOW TO TAKE CARE OF YOUR POOL CUE ~ Ten Tips for Cleaning and Caring for Your Cue (Pool Lessons)

How do you wax a pool cue shaft?

Apply Silky Smooth Shaft Wax, let set for 30 seconds, buff vigorously with clean/dry cotton cloth until smooth. Final burnish with blue and brown McMagic sheets. The friction heat will work the wax deeper into the wood grain. Seal with Ultra-Glide Shaft Conditioner.

How often should I change my pool cue tip?

When or how often should you replace a cue tip? Usually, a tip is replaced either when you want to try something new or if your current tip has worn down too low, where there is almost no tip material left on the shoulder of the ferrule.

How do you tell if a pool cue is warped?

Sighting your cue is the most reliable way to check for warping. All cues have some variation in the straightness and roundness of the cue. Remember that cues are made from a natural product and are affected by their surroundings. Humidity and temperature will always affect a piece of wood.

Are cue joint protectors necessary?

Joint Protectors, also known as Joint Caps, are a must have for any pool cue owner. When you break your cue down, even if you're storing it in a good case, your collar, joint and pin are still exposed. A good joint protector set will protect these essential parts of your cue, extending the overall life of your cue.

What is the best tip size for a pool cue?

Generally speaking most pool players prefer and 8mm to 8.5mm tip for a 1 & 7/8 pool cue ball, and most snooker players prefer a 9.5mm to 10mm tip for a full size 2 1/16 snooker cue ball. American pool uses an even bigger cue ball so the tip sizes are normally between 12.5 mm and 13.5mm.

Should you clean the cue ball?

The frequency of cleaning will vary depending on how often you play pool. For example, if you play one game once a week, you only need to clean the pool balls every other month. However, you should clean the balls monthly if you play two to three times a week or play three or more games weekly.

Why is my pool cue not holding chalk?

The tip doesn't hold chalk when it is packed down from hitting the cue ball and the surface is slick. If you tap the tip to give the surface some texture, it will hold the chalk better.

Should you polish billiard balls?

Once you've cleaned your billiard balls using soap and warm water, you'll likely want to polish them. There are a number of products on the market designed specifically for polishing pool balls. Shiny pool balls make your playing experience all the more enjoyable.

Can you fix a warped pool cue shaft?

Bend It Back

You can actually fix minor bends in your cue with your own arm strength. With the cue at a 60-degree angle to the floor, place the flat of one hand, palm down, directly on the bend. Press down on the cue, holding it still with your hand. The cue will bend easily into shape.

How long should pool balls last?

Usually, polyester resin balls last about eight years or around 80,000 impacts.

Should I chalk my cue?

Chalk lets you add friction to the cue tip, which allows you to make a shot, rather than have the cue slipping off the ball prematurely. Your pool cue tip will come in great condition to play, but over time, it will get worn down, which is why having solid chalk is key to staying on top of your game.

How do you know if a cue stick is good?

What does rubbing the pool stick do?

This prevents the cue from sliding off the ball prematurely, ruining the shot (called a 'miscue'). Over time, the tip of a pool stick becomes worn and smooth from use. Chalk provides the friction necessary to make a shot.

What do you rub on the end of a pool stick?

Even if you have only ever watched others play pool, you probably know players rub a small chalk cube against the tip of their cues. Applying chalk to the tip of the cue is good maintenance for the pool sticks and a natural part of the game for many players.

Is there a wrong way to hold a pool stick?

Ideally, your arm should create a 90-degree angle when you hold the cue stick and are bent over to make your shot. In other words, your arm is perpendicular with the cue stick. Place your non-dominant hand on the pool table as close to the cue ball as possible, without touching the ball with your hand or the cue stick.