How do you open a DUALSHOCK 4 V1?

Pinch the left handle of the controller to introduce an opening. Wedge a plastic opening tool into the opening and slide it up towards the joystick. Pull down on the plier to crack open the casing. Repeat these steps for the right handle.

What screwdriver do I need to open a Dualshock 4?

Phillips #00 Screwdrive is needed. The screws are 6.0 mm long.

How do I know if my Dualshock 4 is V1 or V2?

If you have a V2 controller, you would be able to see a small light bar on the touch bar and it also changes from Bluetooth to wired when you are connected to USB. If your controller does has these specifications, then you probably have a V1 PS4 controller.

How do you open and clean a PS4 controller?

Pull the controller apart from the indent on the bottom between the analog sticks. Gently remove the back of the controller by jiggling it up and forward. Take care not to pop the buttons off. Spray the back piece with a surface cleaner and dry cloth if it's dirty.

How do u fully clean a Dualshock?

Do not use water on the controller as it can damage the electronics. Instead, use a lint-free cloth dampened with rubbing alcohol. Gently scrub any stubborn dirt or grime with a toothbrush dipped in rubbing alcohol.

PS4 Controller 1st Generation Disassemble and Reassemble (STEP BY STEP)

How many types of Dualshock 4 are there?

Color choices. The original DualShock 4 (CUH-ZCT1) is available in Jet Black, Glacier White, Urban Camouflage, Wave Blue (black back), Magma Red (black back), Gold, Silver, and Steel Black.

What is the difference between V1 and V2 controller?

There is nothing major difference between v1 & v2. V2 have a small light bar on the touch pad so that you can see the light in early version it was only in the front.

What can I use instead of tiny screwdriver?

Choose one that has a rounded tip like a butter knife or a small knife that you would use for a cheese board. Take the blade tip and angle the handle down toward the ground to give yourself some leverage. If you don't have a butter knife on hand, try a dime. A dime is actually thin enough to fit in most sling-slots.

What can I use instead of a T8 screwdriver?

What can you use instead of a Torx screwdriver? Sometimes an allen key will work, or even a flat blade screwdriver if it will jam between opposite points in the recess.

Can you open a PS4 with a normal screwdriver?

A TR9 Torx security bit screwdriver.

The PS4 uses TR9 security screws. A TR8 screwdriver may work, but you should use a TR9 for the best results.

What tool do you need to open a PS4?

To disassemble the PS4 you will need two types of screwdrivers: Torx T8 / T9. Phillips PH0 / PH1 Also. Tweezer – will be useful.

How to fix ps4 controller analog stick without taking it apart?

Press the tip of a small paper clip into the reset button on the back of the controller and hold for ten seconds. After ten seconds, your controller will reboot.

How do you remove the faceplate on a ps4 controller?

The plastic shell is held in place by little plastic tabs that snap together. Wedge the plastic opening tool between the shell and the controller and carefully pry off the plastic.

Does DUALSHOCK 4 v1 work on PC?

DUALSHOCK 4 wireless controller compatible devices

Once connected, you can use your wireless controller to control compatible games and applications. You can connect a DUALSHOCK 4 wireless controller to a Windows PC using a DUALSHOCK®4 USB wireless adaptor or a compatible micro USB cable.

Is the DualShock 4 discontinued?

The DualShock 4 controller has been discontinued in Japan since January 2021. For the rest of the world, however, both the PS4 and its various accessories are still available to purchase – and that's unlikely to change until Sony can ship satisfactory numbers of PlayStation 5 consoles.

Which DualShock 4 is the best?

Why is it called DualShock?

The DualShock Analog Controller (SCPH-1200) is capable of providing vibration feedback based on the onscreen actions taking place in the game (if the game supports it), and provides analog input through two analog sticks. Its name derives from its use of two (dual) vibration motors (shock).

Why do ps4 controllers get dirty?

It seems like it is caused by sweaty palms combining with the dust and dirt in the air (unless you have a HEPA air filter, you have dirt in your house) which forms some nasty looking gunk. It is usually located in a line around where we grip the controllers as well as on the triggers and shoulder buttons.

How do you clean a sweaty controller?

One of the most effective ways to use rubbing alcohol is to dilute it 1:1 in water, and then apply it with a misting pump. Give your solution a good shake, mist the controller lightly, and then clean it with a soft cloth. The alcohol should help remove any lingering dirt and kill bacteria in the process.