How much is asphalt?

Asphalt Cost Per Square Foot

Asphalt, a popular second choice, has a life cycle of up to 15 to 30 years and does best in colder climates. Asphalt costs $7 – $13 per square foot.

How do you calculate cost of asphalt?

How Is Asphalt Priced? Asphalt is usually priced by square foot. The cost per ton is $40 to $80 and per square foot is $0.75 to $2.00. The cost is determined by the size of rock in the asphalt, volume ordered, delivery cost, and the location of the work being performed.

How much is a ton of asphalt?

Asphalt cost per ton

Asphalt costs $40 to $80 per ton on average, depending on the mix and material ingredients. One ton of asphalt covers 30 to 80 square feet. A 2-car driveway needs 7.5 to 18 tons of asphalt, depending on the thickness.

How much is 1500 square feet of asphalt?

The Most Common package costs approximately $3910 for 1500 square feet, $6980 for 3000 square feet, and $18400 for 10,000 square feet. Prices vary from job to job.

Is it cheaper to use asphalt or concrete?

Cost Differences Between Asphalt and Concrete Driveways

The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 to $4.00 per square foot. Asphalt prices tend to fluctuate with fluctuations in crude oil prices.

World's Fastest Modern Road Construction Machines - Amazing Extreme Asphalt Paving Machine

Is asphalt the same as blacktop?

Asphalt is mainly used for major highways and streets, whereas blacktop, a subset of asphalt, is used more for less trafficked areas like driveways, parking lots, and playgrounds.

What type of asphalt is best for driveways?

Hot mix asphalt is considered best for driveways, because construction and design features are suitable to giving it a finished appearance that complements the home.

How much will 1 ton of asphalt cover?

One ton of asphalt covers:

2” or 50.8 mm thick = 24 SqM. 4” or 101.6 mm thick = 12 SqM.

What is the cheapest type of driveway?

Gravel Cost Per Square Foot

The most affordable of driveway options, gravel costs $1 – $3 per square foot. They are especially ideal if you have a long, winding driveway. When deciding which type of material to pave a driveway with, consider how labor-intensive it is to install.

How thick should asphalt driveway be?

Residential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate.

How much asphalt is in a dump truck?

The amount of asphalt a truck can carry is based more on truck weight ratings and local jurisdictions more than actual volumetric capacity of the truck bed. For example, a quadruple axle truck will commonly be rated to haul approximately 17-19 Tons (8.5-9.5 Cubic Yards).

How many tons of asphalt are in a dump truck?

limit. Super Dumps are capable of hauling payloads from 19 to 26 tons, if you can properly distribute the loads to each axle. A typical tandem dump truck is limited to about a 13-ton payload in accordance with federal bridge law. Increased truck capacity is important when directly unloading into the asphalt paver.

How much weight can 3 inches of asphalt hold?

An asphalt driveway for residential use can hold approximately 8,000 pounds. Most residential driveways require 2″ to 3″ of asphalt for daily use.

How many tons is a square yard of asphalt?

If you are looking to calculate the asphalt weight per yard, Willie's Paving notes that 1 cubic yard of hot asphalt mix weighs 2.025 tons. If you are calculating yards to tons of asphalt, multiply your cubic yard value by 2.025 tons to determine the project's amount.

How do you convert square feet to tons of asphalt?

How do you figure square yards of asphalt?

What type of driveway adds most value?

Why Is An Asphalt Driveway The Best Option? Pound for pound, asphalt is the building material that gives you the most bang for your buck. Concrete can cost $6.00 to $10.00 per square foot whereas the price of asphalt typically ranges between $4.00 to $6.00 per square foot.

What type of driveway lasts the longest?

Concrete, cobblestone, asphalt, brick, and interlocking pavers are the most durable driveway installation options available today. Apart from their lengthy lifespans, these materials also hold up well in any climate, require minimal maintenance, offer a smooth drive, and elevate your home's first impression.

What is ground up asphalt called?

Crushed asphalt, also known as asphalt millings, is considered recycled asphalt pavement — essentially, they're former asphalt projects being crushed into gravel. Because no new materials are used in creation or needed to be transported, cost is severely diminished.

How many square feet will 1 ton cover?

One Ton of Rock Covers: 240 square feet – 1″ deep. 120 square feet – 2″ deep.

How many bags of asphalt are on a pallet?

This full pallet comes with 63 bags of cold asphalt patch.

How to get a ton of asphalt?

What are the 3 types of asphalt?

There are three main types of asphalt: Hot Asphalt, MC Cold Mix, and UPM. There are also different varieties of these asphalts for summer and winter use. Below is a brief overview of each type of asphalt.

Can you put blacktop over blacktop?

An overlay or resurface can be used on an asphalt driveway, parking lot, or road way. It consists of installing a new layer of asphalt over the existing asphalt and grinding at the transitions (i.e. sidewalks, garages, drains, curbs, or other asphalt points).