How reset a ps4 controller?

Locate the small reset button on the back of the controller near the L2 button. Use a small tool to push the button inside the tiny hole. Hold the button down for roughly 3-5 seconds. Plug in your console, connect your controller using a USB cable and press the PS button.

How do I resync my PS4 controller to my PS4?

On the PS4 controller you wish to sync, hold down the PS button and the Share button simultaneously for 5 seconds. When the new controller appears in the list of Bluetooth device, select it with the other controller. The new controller will then be synced with your PS4.

How do I reset my PS4 controller without the reset button?

Power down the PS4. Turn over the DualShock 4 controller and locate the small hole near the left shoulder button. Unfold one end of the paper clip and insert it to push the button buried inside the hole. Hold down this button for about 5 seconds.

How do I know if my PS4 controller is bad?

To check your controller battery life, hold the PS Button to bring up the Quick Menu on the left side of the screen. You'll see a controller icon with battery life displayed at the bottom.

Why is my PS4 controller blinking but not connecting?

A flashing white light on your PS4 controller usually indicates that the controller is trying to connect to the console. This can happen if the controller has been disconnected from the console or if you're using a new controller that hasn't been paired with the console.

How to Reset PS4 Controller

Why would a PS4 controller stop working?

Common reasons your PS4 controller is not working

The controller's battery is dead. The controller was recently paired with another device, like a different PS4 or PC. The controller is too far from your PlayStation and is no longer connected via Bluetooth®.

Why is my PS4 controller light blue but not working?

What does the blue light on a PS4 controller mean? If you see a blinking blue light on the PS4 controller, don't worry. It means the controller is trying to pair itself with the console and has nothing to do with the dreaded blue light of death.

Why is my PS4 controller glowing orange?

Usually, the orange light on PS4 controller means that your console is charging or in Rest Mode.

How do I relink my PlayStation 4 controller?

How do I know if my PS4 controller is pairing?

While pressing and holding the SHARE button, press and hold the PS Button until the light bar flashes. Enable Bluetooth on your device, and then select the controller from the list of Bluetooth devices. When pairing is complete, the light bar blinks, and then the player indicator lights up.

Why is my PS4 controller blinking?

The PS4 controller flashing white issue is generally caused by two reasons. One is because of the low battery, and that means that you need to charge your PS4 controller to make it back on track. The other reason is that your controller is trying to connect to your PlayStation 4, but failed due to unknown factor(s).

Why won't my PS4 controller connect even after reset?

If your PS4 controller won't connect, try a different USB cable, in case the original one has failed. You can also reset the PS4 controller by pressing the button on the back of the controller. If your controller still won't connect to your PS4, you might need to get support from Sony.

Why is my controller blinking and not connecting?

3. If Your Xbox One Controller Is Blinking. If you press the Xbox button on your controller and it blinks or flashes, this usually indicates that your controller isn't paired to a console. As mentioned above, this can happen when you pair the controller to another system and aren't in range of it.

Why is my controller blinking and not working?

The batteries are low. Just plug in your controller to recharge its internal battery. Once it's charged, the blinking will stop.

How many years do PS4 controllers last?

A PS4 controller has a life of about 4 – 5 years before the analog and buttons start to break or drift. This can be due to mishandling or dust buildup.

How do I fix my controller not connecting?

How do you fix a controller that won't pair?

Press and hold the Xbox button  on the controller for about 6 seconds to turn the controller off. Then press the Xbox button  to turn the controller back on. Re-pair the controller. Press and hold the Pair button  on the back of the controller (the Xbox button  on the controller will start flashing rapidly).

How do you fix a controller that won't sync?

Turn on the console. Press and hold the Xbox button until the controller turns on. Hit the Pair button located on the front right of the console. Press and hold the controller's Pair button—found at the top of the controller near the USB port—within 20 seconds to finish the pairing process.

Does resetting PS4 controller fix drift?

Sometimes a simple reset can get your controller working again. Unplug and turn off your DualShock controller. Find the reset button on the back of your controller near the L2 button. Use a small tool (like a paperclip) to push and hold the reset button for at least 5 seconds.