How to dualshock 4 using the USB cable and then press the PS button?

Connect via USB

Connect the USB cable to one of the USB ports on the PS4. Connect the micro USB side of the cable to the port at the top of your PS4 controller. Press the round PlayStation button in the middle of your controller until the lightbar of the controller lights up in blue.

Can I start the PS4 connect the DualShock 4 using the USB cable and then press the PS button?

What to do when it says to connect the DualShock 4 using the USB cable then press the PS button?

Hold the button down for roughly 3-5 seconds. Plug in your console, connect your controller using a USB cable and press the PS button. If the light bar turns blue, the controller has paired.

How do you connect DualShock 4 without PS button?

Look on the back of your controller. There should be tiny little button the size of a pen tip. Hold this down for ten seconds using a tooth pic or any other pointy object that won't damage the button. Turn on your PS4 and find a USB cable that is compatible with the controller and PS4.

How do I connect my DUALSHOCK 4 without Bluetooth?

Reconnect DUALSHOCK 4 wireless controller to your console

To reconnect your wireless controller to your PS5 console or PS4 console, connect it with a compatible USB cable and press the PS button on the wireless controller. You can then remove the USB cable and use the controller wirelessly.

Connect the DUALSHOCK 4 using the USB cable, and then press the PS button.

Why won't my PS4 controller connect even after reset?

If your PS4 controller won't connect, try a different USB cable, in case the original one has failed. You can also reset the PS4 controller by pressing the button on the back of the controller. If your controller still won't connect to your PS4, you might need to get support from Sony.

How to hard reset PS4?

How do I force my PS4 controller to connect?

How do I get my PS4 out of safe mode without USB?

Press and hold the Power button until you hear two beeps.

You will hear the first beep when start pressing the power button on your PS4. Continue holding the Power button until you hear another beep about 7 seconds later.

Why does my PS4 controller connect but not work?

Common reasons your PS4 controller is not working

The controller was recently paired with another device, like a different PS4 or PC. The controller is too far from your PlayStation and is no longer connected via Bluetooth®. The Micro-USB cable that connects your controller to the console is faulty or disconnected.

Why is my PS4 controller blinking white and not connecting?

A flashing white light on your PS4 controller usually indicates that the controller is trying to connect to the console. This can happen if the controller has been disconnected from the console or if you're using a new controller that hasn't been paired with the console.

Why is my PS4 controller flashing blue and not connecting?

The battery is dying.

Plug the controller directly into the console to let it charge. It can take up to two hours for the battery to charge completely. If your PS4 controller won't charge, it could be an issue with the charging port, charging cable, or the battery itself.

Can you start a PS4 with a wired controller?

Can you use only a wired controller with a PS4? Both Wired and wireless are acceptable.

How do you force power on PS4?

Can you turn PS4 on with phone?

Make sure that the PS4™ console is in standby mode and that the “available in standby mode” function is enabled. Open the PS4 Remote Play app on your Xperia device. If you have followed all the necessary steps, the PS4™ console wakes up automatically.

When I press Power button my PS4 nothing happens?

First unplug the power cable from your PS4 for at least 30 second, and then plug it back in. Once it's plugged back in, you can attempt to turn the console on. Power cycle your PS4. Turn the console off by holding down the power button even if the console seems to be off already.

Is there a PS4 controller app?

Use PS Remote Play to access your PS5™ or PS4™ wherever you go. With PS Remote Play, you can: Display the PlayStation®5 or PlayStation®4 screen on your mobile device. Use the on-screen controller on your mobile device to control your PS5 or PS4.

How do I connect my ps4 controller to my laptop without a wire?

While pressing and holding the SHARE button, press and hold the PS Button until the light bar flashes. Enable Bluetooth on your device, and then select the controller from the list of Bluetooth devices. When pairing is complete, the light bar blinks, and then the player indicator lights up.

How do I connect my controller without Bluetooth?

The Wired Method

Plug your controller into a USB port with a USB-to-micro-USB cable. That's it, as far as connecting the controller goes.

How to start PS4 without controller?

Power On a PS4 Without a Controller

To use this method, press the physical Power button on your PS4. The button will feature a power icon. Your console's power indicator light will blink blue and then white, indicating that your machine has turned on. And that's it.