Is CL16 or CL18 better?

While 3600Mhz processes slightly more instructions with CL18 but takes a little bit longer, 3200Mhz takes a little bit less time but processes fewer instructions. Therefore, the CL16 is superior to the CL18 if speed is your only concern. You should pick CL18 if instructions are more important to you.

Is 3600 CL16 better than 3600 CL18?

CL16 at 3200 is exactly the same latency as CL18 at 3600, because 16/32=0.5 and 18/36=0.5*. So the 3600 memory has the same CL latency and faster data rate, making it strictly faster.

Which CL is better for RAM?

[Example 1]

When the memory frequency is the same, the lower the CL, the shorter the latency time will be, and the less time the computer has to wait to read the memory data, which means the better the performance.

Is CL16 18 18 good?

CL16-18-18 provides better performance. Timings of 16-18-18 provide lower latency and improved responsiveness compared to 16-20-20.

Is CL14 better than CL18?

Is CL14 better than CL18? 3600 cl18 will give you higher frame rates and a lower effective latency but the 3200 cl 14 will give you better frame times. If you use a 3200MHz RAM the memory clock (also called MCLK) and FCLK has to be lowered to 1600MHz directly affecting the speed of data exchange inside the CPU.

DDR4 RAM Speeds — 3200 CL16 vs 3600 CL18 — Which Is Better for Intel and AMD Zen 2?

Is CL18 worse than CL16?

In terms of CAS latency and speed, CL16 is a little better than CL18. But from the prices, the CL16 is more expensive than the CL18. So, if your budget is not too much, you can choose CL18 for your computer.

Is C16 or C18 better?

What's the Difference Between C16 and C18 RAM? The primary difference between C16 and C18 RAM is the two-clock cycle difference in the speed of execution of memory requests. This means that C16 RAM is faster and has lower latency than a C18 counterpart.

Which is better 3200 CL16 or 4000 CL18?

4000MHz CL18 is much faster, in both bandwidth and latency. Memory bandwidth is directly proportional to clock frequency. DDR4–3200 has 25.6GB/s of bandwidth (per memory channel), while DDR4–4000 has 32GB/s of bandwidth (per memory channel). Memory latency is measured in clock cycles.

Is CL18 3600 faster than CL16 3200?

The difference will be extremely minimal.

You can see that the effective latency is the same. 3600 CL18 is the same latency as 3200 CL16. These are MASSIVE numbers, and it takes some incredible demands to reach a maximum throughput that will be bottlenecked by DDR4.

What is better 3600 CL18 or 3200 CL14?

3600 cl18 will give you higher frame rates and a lower effective latency but the 3200 cl 14 will give you better frame times.

What CL is best for gaming?

Can I mix CL 16 and CL 18 RAM?

Short answer, yes, you can.

Which CL is better for gaming?

Generally lower the timings (lower CL) will provide better performance, so if You can choose between CL 15 and CL 16 sicks with same clocks You would benefit from choosing CL 15 ones.

Is CL18 good for 3600MHz RAM?

As far as I know, the minimum of the best RAM frequency that works best with Ryzen 5 3600 is RAM at 3600 Mhz. From those 2, I would say that the memory with 3600, CL18 is working better, but those are just starting points. You should also look for a lower latency, the lower the better.

Is CL19 better than CL16?

If you have a high-end graphics card (so are not bottlenecked by your GPU) and play a lot of memory-sensitive games (e.g. Far Cry 5) at 1080p, you could potentially gain around 10-20% more fps from switching from CL19 to CL16. Less memory-sensitive games such as GTA V might only run around 5% faster.

Do I need CL16 RAM?

If you are looking for the absolute best performance, then you will want to choose CL16 RAM. This is because it has lower latency timings which will result in slightly higher FPS in gaming and other applications.

Can I mix c16 and c18 RAM?

A: you can mix them but its not recommended for performance. It is best to have the same size, frequency and manufacturer.

Is 16gb 3600MHz RAM better than 32GB 3200MHz?

Well, that depends on what you are doing. If you are gaming on a Ryzen CPU (or even an intel CPU) then the 3600MHz will be far more important. If you are doing large workstation tasks like complex video editing then the 32GB of RAM will be very useful.

Is 3600MHz worth it over 3200?

3200MHz or 3600MHz, which is better? If you use your computer for less resource-dependent tasks and applications, then 3200MHz RAM will be great for you. However, if you use your PC for gaming, video editing, or other applications that require high speeds, you'll want to opt for 3600MHz RAM.

Is 3200 CL14 faster than 3600 CL16?

On Ryzen, 3600 CL16 is better than 3200 CL14 because it lets you run the Infinity Fabric clock higher in 1:1 mode, which offsets the minor increase in RAM latency. As for which kit you should get, it comes down to price.

Is 3200mhz CL16 good for 5900x?

3200 CL16 is fine for Ryzen 5000 series. It isn't ideal, but it doesn't hurt your performance in a way that is going to matter in most cases. And the jump from 3600 to 4000 is even smaller than the jump from 3200 to 3600, so definitely don't throw more money at this issue.

Is CL19 4000MHz good?

4000MHz CL19 is technically better, but I wouldn't bother getting it. The price premium for RAM faster than 3600MHz is very high, and the real world performance benefit is pretty minimal. Also, there is no guarantee your CPU will stabley work with 4000MHz RAM.

Is C18 fast RAM?

Both the 3600 C16 and 3600 C18 are amazing at speed and performance due to their high clock speed. But if you're building a new PC and you want to cross your budget, 3600 MHz C18 RAM is the one to go for.

Is 3200MHz C16 RAM good?

It's not the best RAM you can get for a Ryzen 5 5600X - 3600MHz CL16 is better, and often not much more expensive than 3200MHz CL16 - but 3200MHz is perfectly adequate unless you're a competitive gamer who needs the absolute maximum fps they can get.

What is C18 for?

C18 columns are HPLC (high performance liquid chromatography) columns that use a C18 substance as the stationary phase. C18 HPLC columns are used in environmental sciences and chemical analysis, as well as industries such as pharmaceutical and environmental sciences, to analyze individual parts of chemical mixtures.