What happens if my HDMI port is not working?

The HDMI cable you're using might be malfunctioning or too old to perform adequately. Try a different HDMI cable to see if it solves your issue. Alternatively, you can use the first HDMI cable to connect a different video device to check if the video device is malfunctioning.

Is it possible to fix HDMI port?

yes, Yes the HDMI 2 port can be repaired, yours could be soldered directly to a board which takes some skill to reattach if undamaged or replace if need be. Any good local TV repairman or computer repair shop can probably perform this task.

What happens when HDMI port goes bad?

The images could simply be fuzzy, or you may see no picture at all. Another sign of bad cables could be weird color. Experiencing muffled or no sound is also a common problems of a bad HDMI wire.

How do I know if my HDMI port is broken?

What causes HDMI port to fail?

There can be several factors behind the failure of your HDMI cable or HDMI port. If your HDMI is not working properly with your Windows 10 system, then it might be a hardware issue, graphic driver issue, device's display configuration issue, or any other issue.

Common HDMI Cable Faults

What causes HDMI no signal?

Frayed cables, or those with nicks and cuts, may not work properly and may cause problems like the “No Signal” issue. This may also mean having to replace your HDMI cable. You can also check the ports while you're at this since debris and dust can clog them and disrupt the connection.

How much does it cost to repair a HDMI port?

The cost on this varies... anywhere from $90-$130 or more is common. You might have a repair shop in your area who can fix it but if not there are several repair shops here on ifixit who can repair this for you.

Can a HDMI port burn out?

The port can wear out over time. Depends on quality of the HDMI cable for example if one was very hard to plug in it can damage the port quickly. Also take note that unplugging and plugging it while it is switched on a lot in short succession will kill the HDMI chip over time in my cases it took a few minutes.

Do HDMI ports wear out?

Your HDMI cables are handy when it comes to delivering high-definition audio and video signals from a single cord. However, your cords may degrade with age. So it may be time for you to get an upgrade, in which case you should invest in new cables.

What can I use if my HDMI port is broken?

If you determined that the HDMI ports on your TV are no longer functioning and you see a "No Signal" on the screen all the time - don't rush to dispose of the TV. There is still a way to use your TV via HDMI. You will need an inexpensive adapter or a converter to get HDMI signal into the TV.

How do I know if my HDMI port is fried?

If the status reads "This device is working properly," your HDMI port is functioning. If there is a message indicating that you need to troubleshoot your device, your HDMI port is in working condition but has a problem that is likely fixable. If you get a "failed" status message, your HDMI port is likely damaged.

How long does a HDMI port last?

An HDMI cable may last five days or five years, depending on the person using them. In most cases, these cables are resilient and strong, so it's rare to see a case in which an HDMI cable breaks. One of the few reasons people throw away older HDMI cables is because they upgrade to new HDMI cables. What is this?

Why is my TV suddenly saying no signal?

A "No Signal", "No Source", or "No Input" message will appear on your TV screen if the TV is not receiving a signal from your TV box. This is often a result of either the TV box being powered off, not being properly connected to the TV, or the TV being set to the wrong input.

Why is my DisplayPort not working?

If the DisplayPort option is selectable but no signal appears on screen, please unplug the cable and plug it back in the make the monitor re-detect the connection. If the condition persists, try to connect the monitor using HDMI to make sure the monitor functions properly, then try DisplayPort again.

How do I know if my HDMI port is working on my TV?

Verify which HDMI input on the TV that the source device is connected to. On the supplied TV remote control, press the INPUT button repeatedly until it shows the correct HDMI input where the source device is connected.

How do I check my HDMI connection?

How do I get my HDMI to work on my TV?

Connect one end of a universal HDMI cable into the HDTV Adapter. 2. Connect the other end to the HDMI port on your TV. If your TV has multiple HDMI ports, you may use any of the ports.

Can all HDMI ports go bad on TV?

If not clear already, HDMI ports do wear out with use.

How much does it cost to replace HDMI ports on TV?

The cost to fix an HDMI port on a TV is $90 to $300. In some cases, the input circuit board that the HDMI port connects to may be damaged and need to be replaced. The cost for replacing this input circuit board, including labor, ranges from $200 to $350.

Can you buy extra HDMI ports?

An HDMI switch is a device that gives you additional HDMI ports, though it does remove one from the TV. It's a handy component that doesn't take up a lot of space and it's easy to set up.

What does it mean when your TV turns on but the screen is black?

TV black screens are commonly caused by cable connection issues, issues with input devices, or outdated firmware updates. Worst case scenario, the power supply board could have malfunctioned. Could a loose cable cause a TV black screen? Perhaps the most common cause of a black screen is connection issues.

Can you connect to TV without HDMI?

Android Phones and Tablets

The most common method is to use a “casting” app, such as AirBeamTV. These apps allow you to wirelessly connect your phone to any popular TV. Once connected, you can “cast” the content on your phone's screen to your TV, and watch movies from your phone on your TV without HDMI.