Skip to main content

What is 0x0000014 error?

You must first troubleshoot the cause of the error before finding a solution. One cause of Blue Screen STOP 0x00000014 is a hardware failure. This is most likely going to occur after installing new hardware or trying to update current hardware.
Takedown request View complete answer on recoverit.wondershare.com

How do I fix error code 0xc000014?

Hardware conflicts can lead to the error 0xc000014c. Hence, to get rid of the error, you can try disconnecting external devices such as USB drives, DVD drives, etc. After that, reboot your computer to check if the error is fixed successfully.
Takedown request View complete answer on partitionwizard.com

What causes error code 0xc000014c?

The error 0xc000014c is signaling that a part of the Registry is corrupt. When one or more file structures that contain registry data become corrupted and Windows encounters an error at the first booting sector, the error 0xc000014c will be displayed.
Takedown request View complete answer on support.arcserve.com

What is the first step to overcome the blue screen error?

These errors can be caused by both hardware and software issues. If you added new hardware to your PC before the Blue Screen error, shut down your PC, remove the hardware, and try restarting. If you're having trouble restarting, you can start your PC in safe mode.
Takedown request View complete answer on support.microsoft.com

How to fix Boot BCD in Windows 7?

You can run the bootrec utility to rebuild the BCD:
  1. Boot from the Windows 7 DVD.
  2. Click Repair your computer or press R.
  3. At the System Recovery Options window, click Command Prompt.
  4. When Command Prompt loads, type this command: bootrec /rebuildbcd.
  5. Press Enter.
Takedown request View complete answer on neosmart.net

Fix Error Code 0XC000014C in Windows 10, 8.1, 8, 7

What causes Windows 7 not to boot?

In many cases, having Windows 7 fail to boot may be as simple as having your BIOS set with an incorrect boot order sequence. It can be quite common if you have more than one hard drive installed in your computer and your BIOS gets reset.
Takedown request View complete answer on tomshardware.com

How do I force Windows 7 to boot in normal mode?

The following section describes how to get out of Safe Mode.
  1. Press the Windows logo key + R.
  2. Type msconfig in the Run dialog. Select OK.
  3. Select the Boot tab.
  4. Under Boot options, uncheck the Safe boot checkbox.
Takedown request View complete answer on support.lenovo.com

Is blue screen of death fixable?

When a BSOD appears, users should write down the error code and reboot their computer. Windows will attempt to determine the problem and fix it. In many instances, that's enough to address the problem. If the problem persists, users should think back to what they did before the BSOD occurred.
Takedown request View complete answer on techtarget.com

What is the main cause of blue screen error?

Hardware: Faulty memory (RAM), hard disk drive (HDD), solid-state drive (SSD), motherboard, processor, or a power supply unit (PSU) can all be responsible for the blue screen crashes. Overheating: your computer may display the BSOD if it's overheating due to dust, defective fans, or overburdened hardware.
Takedown request View complete answer on malwarebytes.com

Does blue screen of death mean I need a new computer?

Blue screens also do not mean that you have to get a new computer or spend a lot of money on repairs. We can easily troubleshoot and repair your PC of blue screen stop errors. Microsoft has made it very easy for the average user to troubleshoot and repair some blue screen causes.
Takedown request View complete answer on bristeeritech.com

Why am I getting BCD error code 0xc0000034?

Bad sectors, corrupted files, missing DLL files, misconfiguration of boot files, or an unresponsive BCD are among the common causes of error 0xc0000034. Since this is a “Blue Screen of Death” error that will not allow your PC to boot normally, it means you will need an installation disk to fix the error.
Takedown request View complete answer on diskinternals.com

What causes boot configuration error?

Sometimes, the partition where Windows installed is not set active will result in Windows can't boot and give you “The Boot Configuration Data file is missing some required information” error message. Thus, just set Windows partition active will solve the issue.
Takedown request View complete answer on diskpart.com

What is the error code for your PC needs to be repaired?

The error 'Your PC needs to be repaired' is often accompanied by an error code, which helps you narrow down the problem further. Typically, you will see one of the following codes: 0xc000000f – Boot configuration data cannot be read. 0xc000000d – Boot data file is missing information.
Takedown request View complete answer on appuals.com

How to start Windows 10 in Safe Mode?

Do one of the following:
  1. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. ...
  2. If your computer has more than one operating system, use the arrow keys to highlight the operating system you want to start in safe mode, and then press F8.
Takedown request View complete answer on support.microsoft.com

What is error code 0x000000000?

The error code 0x0000002C, 0x00000000 typically occurs in systems where multiple AC feeds are powered on sequentially rather than simultaneously. An Onboard Administrator firmware update should remedy this problem.
Takedown request View complete answer on centricsit.com

How do I get a Windows 10 installation disc?

To use the media creation tool, visit the Microsoft Software Download Windows 10 page from a Windows 7, Windows 8.1 or Windows 10 device. You can use this page to download a disc image (ISO file) that can be used to install or reinstall Windows 10.
Takedown request View complete answer on microsoft.com

Is blue screen error caused by virus?

Overheating: your computer may display the BSOD if it's overheating due to dust, defective fans, or overburdened hardware. Malware: Malware, like a PC virus that corrupts your critical files and folders, can be the reason for a Blue Screen of Death.
Takedown request View complete answer on malwarebytes.com

How do I find out what driver is causing my blue screen?

Review the events log displayed in the driver properties for any faulting driver. Try updating the related driver. Check the system log in Event Viewer for other error messages that might help pinpoint the device or driver that's causing the error. For more information, see Open Event Viewer.
Takedown request View complete answer on learn.microsoft.com

Why is it called blue screen of death?

developers named the error as 'Blue Screen of Death' associating its color with IBM's and a dead screen appearance that just didn't move away without rebooting.
Takedown request View complete answer on answers.microsoft.com

Does blue screen of death mean hard drive failure?

This BSOD error can cause the system to crash suddenly after a stop error. It becomes difficult even to note down the error code. The main reason is that it is a bug check value error code problem. It indicates a possible disk file-system corruption and most likely caused by failing sectors of your hard-disk.
Takedown request View complete answer on geekflare.com

How do I boot Windows 7 in Safe Mode but not normal?

Press “Windows + R” key and then type “msconfig” (without quotes) in the box and then press Enter to open Windows System Configuration. 2. Under Boot tab, make sure the Safe Mode option is unchecked. If it is checked, unchecked it and apply the changes to see if you can boot Windows 7 normally.
Takedown request View complete answer on ubackup.com

How to reset Windows 7 through BIOS?

Performing a Factory Reset from BIOS (Microsoft Windows)
  1. Power on or restart the workstation.
  2. Enter the BIOS by tapping either the right or left bottom of the screen.
  3. Tap Advanced, and then tap Special Configuration.
  4. Tap Factory Recovery.
  5. Select Enabled from drop-down menu.
  6. Tap Home.
  7. Tap Save and Exit.
Takedown request View complete answer on docs.oracle.com

What is the shortcut key for Safe Mode?

Use Shift+Restart

Hold the Shift key while clicking Restart from the Shut down or sign out menu. Select Troubleshoot > Advanced options > Startup Settings >Restart. After the PC restarts, there is a list of options. Select 4 or F4 or Fn+F4 (following the on-screen instructions) to start the PC in Safe Mode.
Takedown request View complete answer on support.lenovo.com

How do I force startup repair?

Method 1: Startup repair tool
  1. Start the system to the installation media for the installed version of Windows. ...
  2. On the Install Windows screen, select Next > Repair your computer.
  3. On the Choose an option screen, select Troubleshoot.
  4. On the Advanced options screen, select Startup Repair.
Takedown request View complete answer on learn.microsoft.com

How do I fix a corrupted PC?

  1. Fix 1. Corrupted File Repair Software Free Download1.
  2. Fix 2. Perform a Check Disk on the Hard drive.
  3. Fix 3. Use the CHKDSK/SFC Command.
  4. Fix 4. Run CHKDSK Alternative.
  5. Fix 5. Change the File Format.
  6. Fix 6. Use an Online File Repair Tool.
Takedown request View complete answer on easeus.com
Close Menu