What is a 10 grade Pokémon card?

PSA 10 Pokémon Cards

Pokemon cards that receive the gem mint 10 grade are straight from the pack into a penny sleeve and top loader. They have never been played or handled. Even pulling them from packs in gem mint condition can prove very difficult.

What is a 10 grade Pokemon card?

Condition of the card

Some also use half-grades or subgrades to value your cards. The lowest is called PR 1 for poor while the highest is known as “GEM-MT10” or Gem Mint. A 10 is deemed a perfect card, virtually untouched with its full original gloss intact and with no stains.

What does PSA 10 mean in Pokemon cards?

Sourcing descriptions from PSA Grading Standards, a 10 is essentially a perfect card. Four sharp corners with no dulling or wear on the card of any kind, essentially it needed to be put into a card sleeve and protected right out of the pack.

Is PSA 10 hard to get?

Earning a PSA 10 grade on average is quite hard, but is highly dependent on a card's age, scarcity, and condition sensitivity. Newer cards generally have a higher probability of earning a PSA 10, since a collector will immediately protect a card after pulling from a pack.

What does grade mean for Pokemon cards?

Pokemon card grading is the process of getting the condition of your cards evaluated. The better the condition, the higher the 'grade' they'll get, which is typically a numerical score out of 10.

HOW TO GET PSA 10 POKEMON CARDS! | PSA Card Grading Process Explained

What does Grade 7 mean in Pokemon?

The Basic Grading Scale:

10: Gem Mint. 9: Mint. 8: Near Mint-Mint. 7: Near Mint. 6: Excellent- Mint.

What is a level 50 Pokémon?

Level 50 Requirements:

Make 999 Excellent Throws. Catch a Legendary Pokemon in your next five Legendary Pokemon encounters. Defeat a Team Go Rocket Leader three times using Pokemon with 2,500 CP or less. Reach Rank 10 in the Go Battle League.

What does Grade 9 mean in Pokémon cards?

PSA 9 Pokémon Cards

Mint means a truly unused and untouched example of an item or card. And that is why this card received a 9 grade. The 10 grades are truly a “gem” example of a mint card.

How do you get PSA 10?

For a card to earn a 10, the edges of a card must be flawless to the naked eye and virtually perfect when looked at under magnification. The final criteria looked at by card graders is the surface of the card. A card's surface is susceptible to loss of glossiness, wax stains, scratching, and printing defects.

What is the difference between PSA 9 and 10?

A PSA Mint 9 pack is a pack that appears to have all the attributes of a PSA Gem Mint 10 but it may exhibit one of the following flaws: a slight touch of wear on one corner (absent a hole or tear in the wrapper), minor toning or soiling to the seal on the reverse or a slight centering imperfection to the wrap.

Are PSA 10 worth buying?

They're given the designation 'Gem Mint'; as that's the grade they've received from the company. Of course, the grading scale goes from 1-10, so a 10 grade is the best copy you'll be able to find. It will feature near-perfect centering and no visible flaws. You'll be unable to buy cards directly from PSA.

What is the rarest PSA?

2005 Umbreon Gold Star Holo

The highest PSA grade one of these has ever received is a 9.5, making it extremely rare to find one in top condition.

Which is better PSA 1 or PSA 10?

The Trading Card Authentication & Grading Process

If your cards pass authentication, PSA grades the condition of each card on a scale of 1-10, with 10 being best. PSA encapsulates each card in its own sonically sealed, tamper-evident case.

How many PSA 10 exist?

The 1961 Topps Baseball set has a gem rate of just 0.3%, making PSA 10s rare despite the large population (just 1,024 total PSA 10s). The most popular and highest graded card in the set is the #300 Mickey Mantle, which received just 2 gems out of 8,321 cards submitted.

How much does PSA 10 increase value?

In that case, the 9 was worth 2.5x as much as the raw. PSA 10s are worth about 3.5x as much as PSA 9. So if you're getting your cards graded, that means you score big with a 10. If you're buying, it means you'll be shelling out the big bucks to a Gem Mint 10.

Why are PSA 10 cards so expensive?

10-Point Grading Process

PSA grading is expensive because they use a 10-point grading process to grade and value cards. Not every grading company has such an extensive grading process. Since PSA does, it makes its services a bit more expensive.

What is the most expensive Pokémon card Grade 10?

As of August 2022, the most expensive Pokémon card is a Professional Sports Authenticator grade 10 Pikachu Illustrator card that social media personality and boxer Logan Paul purchased for $5.275 million, according to Guinness World Records. A PSA grade of 10 means the card was in perfect condition.

How much does it cost to get 10 Pokémon cards graded?

Grading services typically cost $25–50 USD per card to place an order, but they may vary on the card's value. Give the grading service around 2–3 weeks to grade your Pokémon cards and send them back.

Is a 9 graded card good?

If your card gets a grade of 9, you should be very happy. You'll be able to earn book value – or more – for your card. It is also referred to as “mint 9” and is considered the condition that it was in when it was in the pack. If it gets a score of 9.5, it's called a “gem-mint”, signifying that it's nearly flawless.

Is PSA grade 7 good?

As the grade number gets lower, the flaws on the trading card become more and more noticeable. PSA Near-Mint 7, Excellent-Mint 6, and Excellent 5 graded trading cards display poor focus, printing issues, chipping on the edges, surface scratches, and rounded corners.

What does a PSA 7 look like?

A PSA NM 7 is a card with just a slight surface wear visible upon close inspection. There may be slight fraying on some corners. Picture focus may be slightly out-of-register. A minor printing blemish is acceptable.

Can you have level 100 Pokémon?

In the Pokémon games, a Pokémon's level is determined by how much experience it has. A Pokémon's level will range from 1 to 100.