What is a good PFR in poker?

What is a good PFR range? Between 2% and 3% lower than VPIP. If your VPIP is 15%, PFR should be about 12%. These two numbers in combination indicate that you are only playing quality hole cards, and you are predominantly raising with them pre-flop.

What is a high PFR?

High VPIP, High PFR (e.g. 40/35).

This is a loose-aggressive player (a “maniac”). These players make wild bets and raises. They enjoy playing lots of hands and trying to win as many pots as possible. Just wait for a strong hand and keep calling.

What is a good VPIP and PFR 6max?

If you play 6max Zoom then a good VPIP is somewhere around 21. And if you play full ring Zoom games then a good VPIP is somewhere around 15.

What percentage of flops should you see?

Some would argue a player should see the flop on 20% to 25% of hands. Others would argue for an even higher percentage, while many card players say 15% of hands is a good number. Really tight players might not see but 10% of the flops.

What percentage of hands should you raise on pre flop?

An optimal percentage of hands to raise from the button is probably between 40% and 70%, depending on the tendencies of the players in the blinds. The looser and more likely to 3-bet the blinds are, the tighter you should open.

VPIP & PFR - Understanding the Ultimate Poker HUD Combo | SmartPokerStudy.com

Should you always see the flop in poker?

The flop is where the hand really starts to come together, and players start to evaluate the strength of their hands and make decisions based on their potential. You should always look to analyse the texture of the flop and consider what it could mean to both you and your opponents.

What should my PFR be at?

Most winning players in the six max cash games have a PFR stat of approximately 20, give or take a few points. In the tighter games where players tend to fold a lot, this number can profitably go as high as 30, while some players will play a lower PFR in very splashy games where a tight approach is better.

What is a good PFR range?

Solid regulars generally have a VPIP/PFR between 19/17 and 25/23. As you move up in stakes, the rake (the amount taken from each pot by the poker room) decreases as a percentage of the pot and players are able to use wider ranges. Winning regulars often have statistics closer to 28/20 or 27/19 at the higher stakes.

What is a good PFR stats?

PFR stands for preflop raise percentage and it is one of the #1 stats I rely on when playing online poker to determine player type. A good PFR in a 6max poker game is around 18. And a good PFR in a 9max poker game is around 12. But it is important that your PFR is reflected by your play style and also your VPIP.

What is GTO poker?

Game theory optimal, or GTO poker strategy, is a strategy that seeks complete balance in the game, making your plays 100% unexploitable by your opponents. This style of poker is the exact opposite of the exploitative poker strategy, which most players from the older generations employ.

What does ATS mean in poker?

ATS: Attempt to steal. How often a player open-raised from the CO, button, or SB when given the opportunity. BET F: How often a player bet the flop when given the opportunity. BET R: How often a player bet the river when given the opportunity. BET T: How often a player bet the turn when given the opportunity.

What is a good went to showdown?

In general, a WTSD below 25 is a tight poker player who only goes to showdown with good hands. And somebody with a WTSD above 25 is typically a looser poker player who goes to showdown with mediocre hands. Most recreational poker players will have a WTSD of 30 or higher.

What is PFR in pitching stats?

Power finesse ratio or PFR in baseball is a statistical measure of the performance of a pitcher used in Sabermetrics. It is the sum of strikeouts and walks divided by innings pitched.

What is VPIP and PFR?

PFR stands for 'preflop raiser'. It measures how often a player raises preflop when given the opportunity. VPIP is a measurement of how often a player enters the pot preflop whether by raising or calling. PFR only focuses on aggressive actions preflop. A raise on the preflop betting round always counts towards VPIP.

How do you calculate PFR ratio?

The P/F ratio equals the arterial pO2 (“P”) from the ABG divided by the FIO2 (“F”) – the fraction (percent) of inspired oxygen that the patient is receiving expressed as a decimal (40% oxygen = FIO2 of 0.40). A P/F Ratio less than 300 indicates acute respiratory failure.

What does PFR mean on ventilator?

Abstract. Introduction Mechanical ventilation can be monitored by analysing particles in exhaled air as measured by particle flow rate (PFR). This could be a potential method of detecting ventilator-induced lung injury (VILI) before changes in conventional parameters can be detected.

How do you calculate pO2 FIO2 ratio?

PaO2 should = FiO2 x 500 (e.g. 0.21 x 500 = 105 mmHg)

What PFR volume is necessary to achieve 80% conversion?

To reach 80% conversion, your PFR must be 293.3 dm³.

Should you go all in preflop with aces?

Let's take a moment to talk about what to do if you have Aces and action folds to your preflop. Quite simply, you should always come in for a raise, as you would with any other hand. Don't trap and come in for a limp, intending to re-raise if someone else is daring enough.

What is the most common flop in poker?

Should you always run it twice in poker?

Running it twice (or multiple times) does not impact on the overall profitability of a situation in poker and it helps to reduce variance. As such, it may be worth always running it twice (or more) by default.

What is the most predictive pitching stat?

One popular statistic for more accurately quantifying and predicting pitching performance is FIP (Fielding Independent Pitching). FIP attempts to approximate a pitcher's performance independent of factors which the pitcher cannot directly control himself, such as his defense's performance.

What is the most important pitching stat?

A huge part of determining a pitcher's true skill level, though, begins with the basic walk and strikeout rates. A great place to begin with pitchers is to look at their K-BB%. This is the strikeout percentage (rather than K/9) minus their walk percentage. The higher that number, the better.

What are the most common pitching stats?

For pitchers, wins, ERA, and strikeouts are the most often-cited statistics, and a pitcher leading his league in these statistics may also be referred to as a "triple crown" winner.