What is a heavier cue for breaking?

Playing cues typically range in weight from 18 – 21 oz. The average and most common weight is around 19 oz. Breaking cues, on the other hand, usually start at 21 oz. and can weigh over 27 oz. Most players assume that a heavier cue means a more powerful break.

Is a heavier cue better for breaking?

The idea is that the lighter the cue, the faster you can swing it. And the faster you can swing it, the harder you can break. Because this theory revolves around acceleration and speed, lighter break cues are good for players who are able to be accurate with a fast, athletic break stroke.

What is the best weight for a pool break cue?

Cue weight is very much dependent on the individual player. Some are more comfortable with a light cue while others are only happy playing with a heavy cue. What is right for one person is not necessarily right for another. That being said, the most common weight for a pool cue of any kind is 19oz.

What cue to use for breaking?

What type of cue should I use to break with? It is best to use a dedicated break cue, which is beefier and has a hard tip (usually phenolic). Power breaking with your normal playing cue can cause damage over time, and it will flatten the tip.

What does a heavier pool cue do?

A heavier cue will tend to create more CB speed for a given stroke effort. A heavier cue might also be easier for some to keep on line during the stroke, but this is a very individual thing. More weight can also help prevent stroke deceleration.

Break Cue Weight Suggestion

What weight cue do professionals use?

Select the Right Cue Stick Weight

While professional billiards players tend to use pool sticks that weigh about 19 ounces, it is a better idea for beginners to use pool sticks that are a bit lighter (around 15 ounces) while they are still learning how to pocket those tough shots with ease.

What pool cue do most pros use?

PROFESSIONAL billiard players TRUST their game to Predator more than any other brand, including many WORLD CHAMPIONS ★ and top ranked players.

Are break cues legal?

Two common examples of bad sportsmanship are: conceding an unfinished game; and breaking down a cue during play. Both forms of conduct are frowned upon by professionals, and have no place in amateur play. All players are asked to allow opponents to finish the game before racking the balls or breaking down cues.

Where is the best place to hit the cue ball on break?

The best place to put the cue ball is close to the center of the table, off to one side by a few inches. This helps direct the most power through the rack. Additionally, if you hit the head ball square, the two balls in the second row have a decent chance of making it into the side pocket.

Do you need an expensive break cue?

If you buy a cue with a hard tip and firm shaft at a price point that you are happy with, chances are you will be extremely pleased. For most players, we recommend not buying a super expensive break cue – it's simply not needed.

What's the heaviest pool cue?

The Elite "Heavy" Break Cue is the answer. This breaker generates power through its massive weight. The Heavy weighs in at approximately 27oz, making it one of the heaviest breakers on the market.

What is the standard cue weight?

Pool cues average around 59 inches (150 cm) long, are commonly available in 17–21 ounces (0.48–0.60 kg) weights, with 19 ounces (0.54 kg) being the most common, and usually have a tip diameter in the range of 12 to 14 mm.

What is the hardest cue tip?

Is a soft cue tip better than a hard cue tip?

A harder tip has a slightly better hit efficiency (energy transfer) than a softer tip. This will result in slightly more CB speed for a given stroke speed. This can provide a slight advantage for draw shots, where, where slightly more CB speed will retain slightly more backspin on the way to the OB.

Is a bigger cue tip better?

It should always be the same diameter as your shaft – no smaller. A smaller tip will give you more control over spin, but may also cause more miscues. A larger tip will give you less spin control, but a more powerful, consistent shot. With American cues, the standard size is usually around 12 or 13mm.

What is the average speed of a cue ball on break?

The speed of break shots ranged from 22 to 26 MPH, the average being 24 MPH. The top speed of 26 MPH was recorded for several break shots by Mike Sigel. At this speed, the cue ball reached the one ball in 0.12 seconds.

Where do you aim when breaking a 9 ball?

Generally, as shown below, the goal on a 9-ball break (either by breaking from the side rail or with a cut break from the “box”) is to pocket the “wing ball” and squat the CB in the center of the table to get a shot at the 1 after the break.

What's the best way to make the 8-ball on the break?

As shown below, a good power option for the 8-ball break is to position the CB slightly off center, and hit the lead ball squarely. As with the 10-ball break, the 2nd-row balls tend to head toward the side pockets, and the corner balls can go four rails to the corners.

How often should you chalk your cue?

How Often Should You Chalk Your Cue? Some players find success re-chalking after every other shot, but others prefer to re-chalk before each shot they take. You can chalk your cue more sparingly if you want, but if you need to take a shot with some spin, it's a good idea to apply some chalk.

What are sneaky Pete cues?

A Sneaky Pete is designed to look like a poorer quality, traditional house cue instead of a custom cue. The idea behind this was that people would underestimate the capabilities of their opponent and be susceptible to being hustled.

Why is scooping the cue ball illegal?

But why are scoop shots illegal in pool? Scoop shots are illegal (in all Billiard leagues) because they may bounce off the ferrule, not the tip. A double hit may also occur as the cue hits the ball, the felt, then the ball again (or at the same time). Scooping is also damaging to the felt.

Is a light or heavy pool cue better?

In general, a lighter cue will allow more control over finesse shots, and a heavier cue will allow more cue ball (CB) speed with less apparent stroke effort. A heavier cue might also be easier for some people to keep on line during the stroke, but this is a very individual thing.

How often should you change your cue tip?

When or how often should you replace a cue tip? Usually, a tip is replaced either when you want to try something new or if your current tip has worn down too low, where there is almost no tip material left on the shoulder of the ferrule.

Is a nickel or dime cue tip better?

– Nickel or dime radius only makes a difference on very small diameter tips. – On very small tips it's better to have a dime radius than a nickel radius. from Patrick Johnson (in AZB post): To avoid hitting on a tip's edge, it should be shaped to a curvature radius less than its width.

What cue does Efren use?

Fueled by the demands of the professional player comes the revolutionary Pro Series cues.