What is error cause code 3?

Cause 3 No route to destination - This cause indicates that the called party cannot be reached because the network through which the call has been routed does not serve the destination desired.

What is a cause code?

A cause code provides useful summary information on the cause of the injury or illness when data is analyzed for trends.

What is ISDN cause code 03?

No route to destination (ISDN Cause Code 03). Channel unacceptable (ISDN Cause Code 06). Normal call clearing (ISDN Cause Code 16).

What is a cause code in telecom?

Cause codes provide granular information about a call status to help you understand what happened with a call. These cause codes are primarily derived by Exotel as per the operators. These are currently exposed via our Passthru applet. Cause codes ranging from 1-127 are as per the ISDN standard.

What is cause code 6?

This number is to sniped from the dialed number being sent to the network by the customer premises equipment. Cause No. 6 - channel unacceptable. This cause indicates that the channel most recently identified is not acceptable to the sending entity for use in this call.

How to fix Just Cause 2 DirectX error code 3 HD

What code 3 means?

CODE 3 EMERGENCY RESPONSE A “CODE 3” response is defined as an emergency response determined by factors such as immediate danger to officer or public safety that require an expedited priority response utilizing lights and sirens.

What is cause code 1?

This cause is returned to a calling party when the called party number indicated by the calling party is no longer assigned. The new called party number may optionally be included in the diagnostic field. If a network does not support this cause, cause no. 1, unallocated (unassigned) number shall be used.

What is cause code 7?

Cause No. 7: call awarded and being delivered in an established channel. This cause indicates that the user is receiving an incoming call, which is being connected to a channel already used by that user for similar calls (e.g., packet-mode X. 25 virtual calls).

What is the cause code 8?

Cause value = 8 GPRS services and non-GPRS services not allowed (Additional cause codes for GMM) This cause is sent to the MS if it requests a combined IMSI attach for GPRS and non-GPRS services, but is not allowed to operate either of them.

What is cause value 7?

Cause #7 – EPS services not allowed

This EMM cause is sent to the UE when it is not allowed to operate EPS services.

What is cause code 4?

Cause 4 Send special information tone - This cause indicates that the called party cannot be reached for reasons that are of long term nature and that the special information tone should be returned to the calling party.

What are the 3 ISDN channels?

There are three main types of channels used in the ISDN network viz. bearer(B), data(D) and hybrid(H) channels. Different data rates can be obtained by the user with combinations of these channels. One bearer channel supports 64 kbps, one data channel supports between 16 to 64 kbps.

What is cause value 42?

Cause value 42 (Switching equipment congestion) indicates that the switching equipment generating this cause is experiencing a period of high traffic.

What are the external cause codes?

External cause codes identify the cause of an injury or health condition, the intent (accidental or intentional), the place where the incident occurred, the activity of the patient at the time of the incident, and the patient's status (such as civilian or military).

Where are external cause codes?

Activity codes are found in category Y93. They are used to describe the patient's activity at the time of the injury. External cause status codes are found in category Y99.

What do external cause codes identify?

The external cause-of-injury codes are the ICD codes used to classify injury events by mechanism and intent of injury. Intent of injury categories include unintentional, homicide/assault, suicide/intentional self-harm, legal intervention or war operations, and undetermined intent.

What is cause code 17?

Cause value 17 indicates that the dialed endpoint is unable to accept another call. Cause value 17 (1TR6) indicates that the call cannot be completed because the user has not subscribed to the service, feature, or supplementary service requested in the SETUP message. This cause value has end-to-end significance.

What is cause code 80?

Merchants who receive a chargeback for a transaction placed with a Visa card may encounter reason code 80, which indicates an improperly processed transaction that the cardholder does not believe they should be responsible for paying.

What is cause code 57?

Cause value 57 indicates that the call cannot be completed because the user has requested a bearer capability in the SETUP message which is implemented by the equipment generating this cause value, but the user either has not subscribed to the bearer capability or is not authorized to use the bearer capability.

What is cause code 0?

Usually error code 0 means there is no response.

What is cause code 41?

Below link contains all disconnected cause codes, chick the table search for cause code41. Hi, it means whatever network media between "connecting" your device with the SP (ISDN, Fiberoptic, ethernet cable .. etc) it failed and need to be provisioned from the administrator of that network.

What is cause code 85?

Merchants who receive a chargeback for a transaction placed with a Visa card may encounter reason code 85, which indicates a disputed transaction that the cardholder does not believe they should be responsible for paying. The actual underlying cause of this chargeback may be either friendly fraud or merchant error.

What is cause code 100?

This cause usually occurs in the same type of situations as cause 1, cause 88, and cause 100. This cause indicates that the called party cannot be reached because, although the called party number is in a valid format, it is not currently allocated (assigned).

What is cause code 86?

element indicating a suspended call that has in the meantime been cleared while suspended.

What is 43 reason code?

The Code 43 error is one of several Device Manager error codes. It's generated when Device Manager stops a hardware device because the hardware reported to Windows that it's having some kind of unspecified problem.