What is error code 5C?

A 5E or 5C error code indicates that the washing machine has detected a drainage issue. The most common reason for this error is a blocked filter or a kinked drain hose.

How do I fix the error code on my Samsung washer SC?

Resolving the SC error code is usually as simple as unclogging the drain hose, pump filter, or drain pump. Making sure the drain hose is installed correctly can also resolve the issue. If you do not have time to fix the error, the error can usually be resolved by disconnecting the power for a minute or two.

Why does my Samsung washer keep saying SC?

If your Samsung washer is displaying an SC error code, it means the appliance has a drainage problem because the drainage cycle is taking too long to complete.

How do I clear the 5E error on my Samsung washer?

What causes a Samsung washer not to drain?

When your Samsung washer doesn't drain, it can be alarming to find your clothes sitting in water in the wash tub. What causes draining problems? It could be because the washer isn't level or the drain tube is clogged or pinched. Adjust the legs of your washer, as needed, and check the drain tube for kinks or damage.

How to Fix the 5C Error Code | Samsung Ecobubble Front Load Washing Machine

What does 5C mean on a Samsung washer?

A 5E or 5C error code indicates that the washing machine has detected a drainage issue. The most common reason for this error is a blocked filter or a kinked drain hose.

Can you force a Samsung washer to drain?

3 Open the filter cover (A). You may need to use a key or coin to pry the cover open. 4 Slowly pull the emergency drain tube out while keeping the drain cap closed. 5 Open the emergency drain cap (C) by pulling it from the tube.

Why does my Samsung washer keep giving me an unbalanced error?

Unbalanced Laundry Load

Either too much or too little laundry can cause the washer's drum to be unbalanced. Putting too many items in the washer and overloading it can cause the issue. Removing a few items should resolve the error code. As mentioned above, large, heavy items are also often responsible for the UR code.

How do you rebalance a Samsung washer drum?

Why does my Samsung washing machine drain water while it is filling?

If your washer is draining the water at the same time it is filling with water, please check the following: Make sure that the house drain pipe is at least 30 inches high. If so, check to make sure the drain hose is not pushed too far down into the drain.

Can an unbalanced washer be fixed?

Thankfully, the problem can usually be fixed by simply rearranging your load of washing to make it more balanced or by making sure your washer is sitting level on the floor, but sometimes it may be one of the internal components that are the cause of the problem, which means they will need to be repaired or replaced.

Why won't my washer stay balanced?

The most likely culprit is the suspension rods. These rods help to limit the amount of side to side and front to back movement that happens when a washer enters the spin cycle. As these rods age, they no longer work as intended and need to be replaced.

How do you fix a washer that won't balance?

Top-loading washers automatically adjust to level. If something has shifted, you can relevel a top-loading washer by tipping the washer forward, then placing it back on the floor. Front-loading washers level by turning a leg to raise or lower it.

How do I know if my washing machine is clogged?

Observe the washing machine as it pumps water into the hoses and up into the standpipe. If you see water back up and out of the standpipe, your washer's drain is most likely the issue. The amount of time it takes for the standpipe to fill up and overflow helps you diagnose where the clog is located.

How do I know if my washing machine filter is blocked?

Why won't my Samsung washer drain and spin?

If your washer doesn't drain or spin:

Make sure the drain hose is straightened. If you have a kink in the hose, it may restrict any water from draining. Make sure the debris filter is not clogged. If you are able to open and close the door, close it and press START/PAUSE.

How do you drain a Samsung top load washer for moving?