What is error code OXB3D94A2B?

An OXB3D94A2B error code displays on the printer control panel, and the printer does not respond. To resolve the issue, reset the printer, and then turn off IPv6 through the Setup menu on the control panel. Step 1: Reset the printer. To temporarily clear the error, reset the printer.

How do I clear the error code on my HP printer?

Turn the printer off, wait 15 seconds and turn the printer back on (using the power switch located on the back of the printer). The error code should not appear again.

How do I get my Canon printer out of error state?

If your printer's status displays "Printer in error state," there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn't open and the paper isn't jammed.

How do I fix my printer error code?

Why does my Canon printer keep saying error?

Canon printers produce error codes for one of several reasons: The settings for your printer might not be compatible with the document you're trying to print. The loading bay for your paper might have become lodged with paper or you're using the wrong type of paper.

How to Fix HP Printer Error Code 0x61000f6

How do I clear the error code on my Canon copier?

What is error B on Canon printer?

When those lights are lit, that is an indication that the ink cartridges would need to be replaced.

What is the most common error in printer?

1. Paper Jams. Paper jams are perhaps the most loathsome of all printer problems.

How do I fix error 2 on my HP printer?

An E1 or E2 error indicates that the paper size setting does not match the paper size that is loaded. Remove all paper from the input tray, and then load the correct paper size. Remove any paper from the input tray. Slide the paper width guide as far as possible to the left.

What is error code OXB8355BFA on HP printer?

Error code OXB8355BFA on the HP Office Jet 6950 printer indicates an issue with the ink system. This error code can appear due to a few different reasons such as low ink levels, ink cartridges not installed correctly, or an issue with the printhead.

How do I diagnose my HP printer problems?

Run Diagnose & Fix

Open the HP Smart app, and then open Diagnose & Fix. Windows: Click the Diagnose & Fix icon in the bottom left corner. macOS: Click your printer, click Printers in the top menu bar, and then click Diagnose & Fix.

What is the common cause of printer failure?

Common factors include driver problems, software issues, hardware failures and overuse.

How do I know if my printer is bad?

Can I factory Reset my Canon Pixma printer?

To reset the PIXMA TR8620 to its factory default settings, follow these steps. With the printer powered on, select Setup . Select Device settings . Scroll to the bottom of the menu list and select Reset settings.

Where is the reset button on a Canon ink cartridge?

What is error code 3 on Canon?

Solution. If the orange light is lit and the E03 support code displays on your printer, there is a paper jam.

What is error code e2 on Canon printer?

Canon printer error: "Error e02"

Error code e02 occurs due to overheating of the printhead or when the paper is not correctly placed into the input tray and therefore the paper feed rollers are unable to pick up the paper from the paper tray.

What is error 3 2 on Canon printer?

E > 3 > 2 appears

This screen appears when WPS setup was not completed within a certain time. For details on checking the wireless router settings, see the router manual or contact its manufacturer.

What is error 4 on pixma?

Error code E04 means that the FINE cartridge in your printer is not installed correctly. To remove the cartridges you will need to push the output tray back in before opening the cover. Once cartridges have been removed they can be re-install them by firmly pushing them back in until they click into place.

What is the admin code for Canon copier?

The default user name for the administrator is "Administrator" and the default password is "7654321".