What is the top part of a pool table called?

Top Rails – The top surface of the table, no covered by cloth, from which the cushions protrude toward the playing surface. The head and foot rails are the short rails on those ends of the table; the right and the left rails are the long rails, dictated by standing at the head of the table and facing the foot end.

What are the parts of a pool table called?

Cushions: Also known as rail cushions or bumpers. It is the cloth-covered rubber that borders the inside rails of the table. Rails: Where the cushions are attached to – usually made of solid wood. The rails prevent chipping and/or peeling that could occur when the cushions are in need of replacement.

What is the green top of the pool table called?

Baize is often used on billiard tables to cover the slate and cushions , and is often used on other kinds of gaming tables (usually gambling) such as those for blackjack, baccarat, craps and other casino games. It is also found as a writing surface, particularly on 19th century pedestal desks.

What is a slate pool table top?

Slate pool tables

Considered the highest quality table top material, slate refers to a rock-like material that's been split into wide, flat pieces. This material is typically composed of clay, quartz, and sand, and is cut into perfectly flat surfaces as dense as stone and as smooth as glass.

What do you call the edges of a pool table?

The surround is the edge (apron) of the table, and also is part of the and upper top of the pool table, which provides a backing for the rails. The Rails are rubber bumpers of a certain profile that line the edges of the table and the pockets.

The Rules of 8 Ball Pool (Eight Ball Pool) - EXPLAINED!

What is edging for pool?

What is Pool Edging? Some contractors refer to pool edging as pool coping. It simply refers to the material used for the edges around the pool shell wall.

What is the tile around the edge of a pool called?

Coping refers to the tile or stone that lines the edge of your pool. This can be found on the inside edge, outside edge, or both. With coping, you can add a colorful splash of tile or classic stone accents.

What are the top of pool tables made of?

Slate is a solid rock made of many minerals including quartz, clay and mica with a fine grain. It is ideal for pool tables because it naturally splits into wide, level pieces, and can be easily ground and polished into a perfectly flat surface.

Is it OK to stand on a slate pool table?

The key part to understanding why a pool table shouldn't be stood upon is its slate. The slate is a piece of flat stone that is often milled to precision, then covered in a cloth for pool. The slate is very fragile, and most importantly a very brittle material that doesn't offer much in the way of structural support.

Can you break pool table slate?

Slate is a rock and can be chipped, cracked or otherwise damaged relatively easily. Use a drill to carefully remove the screws holding the slate to the table. Lift the slate out and set it against a wall or lay it on the floor. Tip: The slate in a pool table can weigh 450 pounds or more.

What is the black dot on the pool table?

A semi-circle or “D” is drawn on the head side of the baulk line. Six black spots are placed on the playing surface to mark the coloured snooker balls positions.

What is a bumper on a pool table?

Bumper pool is a cue sport played on an rectangular (or sometimes octagonal) table fitted with two pockets and an array of fixed cushioned obstacles, called bumpers, within the interior of the table surface.

What is the difference between a pool table and a billiard table?

Billiards is played on a table without pockets. The game only has three balls, which are red, white (with a spot), and another white one (without a spot). Pool involves a table with six pockets. You need 15 balls, but some people play with just nine.

What are pool parts?

What part of a pool table is slate?

Slate is the preferred material for the play surface.

The playing surface of a billiard table has traditionally been made using a large slab of slate. Slate is a bluish-gray rock that cleaves (splits naturally) in broad, flat segments.

Should a pool table be covered when not in use?

Unlike other kinds of tables, a pool table needs to be covered when not in use. This prevents dust and other particles from settling on the felt surface and messing up the playing area. Don't cover your pool table with just anything, however. A sizable tarpaulin mat should do well enough.

Can you sit on the pool table while playing?

Even if you're a somewhat accomplished player, house rules rule… No sitting on the table. Spend some time in a billiard room and you'll undoubtedly hear someone get yelled at from across the room to “get off the table!” This is an embarrassment that is easily avoidable.

How much weight can a pool table take?

On a six-legged, 1,200-pound table, each leg supports 200 pounds. So, most people will not need to reinforce their floors. The only exception is if you are looking at a 12-foot slate pool table. Each leg supports over 400 pounds of weight!

What is the best top for a pool table?

Here are the top materials for a pool table: Slate: This material is probably the most common and is preferred by many pool players. Slate is made of solid rock, which means it is heavy. Therefore, it requires a durable and sturdy floor.

What's the heaviest part of a pool table?

The heaviest part of your pool table is the slate. Our tables feature 3 pieces of slate fitted to ensure perfect play, and these pieces weigh in between 150-250 pounds each.

Can you replace a pool table top?

If you want to save money on pool table resurfacing, it is a good idea to combine services when you need them. For example, if you want to move your pool table to a new home, it will need to be disassembled and reassembled. So, it makes sense to replace the playing surface when you move the table.

Why are swimming pool tiles blue?

Most swimming pool owners choose blue tiles for their pools to match the color that reflects the sky's blue color. Blue is also a highly desirable water color. In fact, many vacationers search for countries surrounded by blue ocean water and white sand beaches.

What is a pool birdcage?

A birdcage is an enclosure that is built out of large beams that cover an entire pool, spa, patio, or yard area. Screening is then installed, creating what looks like a giant birdcage. In Florida, pools must meet certain safety requirements, both residential and commercial.

What is the floor of the pool called?

Base Track. A part of an above ground swimming pool that stretches from base plate to base plate between the uprights of the swimming pool and forms the bottom rim of the pool structure. During installation, this track has a groove into which the wall of the swimming pool is rolled.

What is a bullnose edge on a pool?

Bullnose Pool Coping

This style of pool coping refers to a rounded edge finish. Instead of a sharp or square edge, bullnose gives you a rounded edge. This can be a great look and a softer look and feel. The rounded shape has safety benefits, as well as offer you a smoother look and texture for your pool.