What is Type 3 asphalt?

APOC T3 Roofing Asphalt

Asphalt

Asphalt most often refers to: Bitumen, also known as "liquid asphalt cement" or simply "asphalt", a viscous form of petroleum mainly used as a binder in asphalt concrete. Asphalt concrete, a mixture of bitumen with coarse and fine aggregates, used as a road surface.

https://en.wikipedia.org › wiki › Asphalt

Asphalt - Wikipedia

is a hot applied asphalt designed to be used by professionals in built up roofing. It is formulated with premium grade asphalts, and provides outstanding performance. This product has excellent adhesion and waterproofing properties, and delivers consistent and dependable results.

What is the difference between Type 3 and 4 asphalt?

Type III, is considered to be “steep” asphalt but is limited to slopes up to 2 in 12, and Type IV is “special steep”. The drawback is, the longer it is processed, the shorter the life.

What is Type 3 asphalt used for?

IKO Asphalt Type 3 is a proven waterproofing material and is suitable for use in selected damp proofing and waterproofing applications. Processed under strict quality control standards in IKO's own oxidizing vessels, the product is available in bulk liquid and 100 lb. kegs.

What is Type 2 asphalt?

Type 2 Available in Bulk Liquid & 100 lb Kegs IKO's Type II Asphalt is an oxidized bitumen intended for use with organic felts, glass felts, modified membranes, insulation and coverboards with slopes of 0-3 : 12 (0-25%). This asphalt conforms to all requirements of CSA specification A123.4-M, Type II, and UL55A.

What is Type 4 asphalt?

Excellent protective coatings for roofs, foundations, concrete, and metal. Applied to install roofing and waterproofing sheets. Compatible with SEBS, APP, and SBS rubber modified asphalts. Will adhere to most surfaces.

Asphalt Types

What is Type 6 asphalt?

Type 6 asphalt contains slightly larger stone, so it provides more strength but is not quite as smooth as Type 7. Once Sealcoated it is difficult to distinguish the difference in the textures.

What is Type V asphalt?

V A heavy duty Size 10 or 14 asphalt wearing course for heavily trafficked intersections. HP A high performance Size 10 or 14 heavy duty wearing course asphalt incorporating a Polymer Modified Binder (PMB) where a high resistance to deformation and flexural cracking is required.

What is Type 1 paving?

MOT Type 1 or Type 1 MOT is a popular type of sub-base used for highways, driveways, car parks and footpaths. This sub-base consists of limestone, gritstone or basalt and granite crushed to 40mm down to dust to create small particles easy to compact.

What is the difference between Type 6 and Type 7 asphalt?

There is also a durable Type 6 asphalt which is made with smaller aggregate. It is used on existing blacktop that is being removed, milled, and replaced. Type 7 asphalt is made with the smallest aggregate and is generally used on an area that is being resurfaced.

What is the difference between Type 3 and Type 6 asphalt?

Type 3 is an economical choice that offers excellent durability. If the pavement's aesthetics are paramount, Type 7 HMA may be chosen; it contains the smallest aggregates, giving the pavement an extremely smooth surface. Type 6 HMA has slightly larger aggregates than Type 7, so it is stronger and not quite as smooth.

What is a Type 3 roof?

APOC T3 Roofing Asphalt is a hot applied asphalt designed to be used by professionals in built up roofing. It is formulated with premium grade asphalts, and provides outstanding performance. This product has excellent adhesion and waterproofing properties, and delivers consistent and dependable results.

What grade is asphalt?

The Asphalt Institute specifies four penetration grades: 60-70, 85-100, 120-150, and 200-300. The 60-70 grade is usually used only in pavements where traffic is very heavy such as principle city streets and very heavily trafficked rural highways.

What is 3 tab asphalt?

3-tab asphalt shingles lay flat and get their name because of the 3 tabs on each shingle strip. Architectural shingles give your roof a good-looking random pattern or simulate the look of wood/cedar shakes. 3-tab shingles used to dominate the roofing industry and are the cheapest of the 3 types of asphalt shingles.

What type of asphalt is best?

The 41A asphalt type is a smoother surface. It is durable, but with a finer rock and sand mixture. This is what most homeowners choose for their driveways.

What's the best type of asphalt?

Hot mix asphalt is considered best for driveways, because construction and design features are suitable to giving it a finished appearance that complements the home.

What is the difference between Level 2 and Level 3 asphalt?

Level 2 ACP - ACP for use in applications with low traffic volumes and low volume truck traffic. Level 3 ACP - ACP for use in applications exposed to moderate truck traffic.

What is the highest grade asphalt?

There are three different grades available in asphalt. The grades available are I-2, also known as base; I-5, known as top ;and the I-4 or commercial top grades.

What type of asphalt is best for roads?

Of all the asphalt types available, hot mix asphalt is the most commonly used on roads, pavements. It is a flexible mix of fine and coarse aggregate and asphalt binder, which produces a highly weather-resistant pavement. Hot Mix Asphalt is heated and poured at temperatures of about 300 to 350 degrees Fahrenheit.

What is the difference between Type 6 and Type 5?

Fives tend to be quiet and calm, while Sixes are usually responsible and loyal. Fives bring insight and knowledge to a workplace; they can help Sixes feel more confident in themselves. Sixes offer hard work and practical solutions to a work environment. Sixes can help Fives connect more deeply with others.

What is Type 3 aggregate used for?

MOT Type 3 aggregate is a coarse, granular material. It is a well-graded material, typically used in road construction and as a base layer for other construction materials such as asphalt.

What size is Type 3 aggregate?

In very general terms, Type 3 is an open graded crushed aggregate roughly in the range 40mm to dust.

What is Type 2 aggregate?

Our Type 2 is a crushed aggregate with extra dusts and fines, which makes the perfect sub base for a range of domestic and commercial construction projects. Graded to 50mm down to dust and fines no specified grading, it is finer than our MOT Type 1 sub base, as it is composed of fewer larger angular scalpings.

What is ac20 asphalt?

AC-20XP is an SBS polymer modified, hot applied asphalt designed for use as a bituminous binder for chip seals. This product is supplied in bulk. Recommended Use. AC-20XP should be applied with well-calibrated distributors.

What does ABC stand for in asphalt?

"Base course" refers to the sub-base layer of an asphalt roadway. Generally consisting of larger grade aggregate, spread and compacted to provide a stable base for further layers of aggregates or asphalt pavement. Aggregate base course is often referred to as ABC.

What is 404 asphalt?

Item 404-LVT is a mix that is rich in asphalt binder, fine textured, nonrestrictive in aggregate shape and type, with restrictive RAP limits. It can be placed in a thin layer of 1 inch for economy.