Skip to main content

What makes a cue low deflection?

A low-deflection (LD) shaft has less “endmass“ than a regular shaft. As a result, it creates less “cue ball deflection” or squirt, so the CB heads closer to the line of aim when hitting off-center to impart sidespin. LD or low-squirt shafts have both advantages and disadvantages for different players.
Takedown request View complete answer on billiards.colostate.edu

What are the benefits of low deflection cues?

The farther the strike from center, the more the cue ball is deflected off-line. Cue ball deflection will also increase with a faster stroke. Lower deflecting cues require less compensation and therefore make the game easier.
Takedown request View complete answer on predatorcues.com

What causes pool cue deflection?

The vast majority of all shots are missed when “English” or sidespin is used. The reason is simple: when you use English, the cue ball doesn't go where you aim it. That's called “cue ball deflection” or “cue ball error” and the typical player takes years to learn to compensate for it.
Takedown request View complete answer on fgbradleys.com

Is more deflection good or bad?

The word “deflection” tends to have negative connotations, as the intention is to keep something away from someone. The implication being something bad could happen otherwise.
Takedown request View complete answer on nice.com

What is acceptable deflection?

Allowable deflection is generally expressed as a fraction of the span. A larger number in the bottom of the fraction represents a more stringent limitation. For example, the allowable deflection of a 12 ft span floor joist with plaster (L/360) is 0.4 inches (12 ft divided by 360).
Takedown request View complete answer on weyerhaeuser.com

Bitcoin Had Record Q1

Which is better nickel or dime cue tip?

Tips shaped to a dime have a smaller contact point with the cueball, so in theory they can create more spin, but the smaller “sweet spot” can be slightly less forgiving. I prefer a nickel shape, personally, because I find that a nickel is more forgiving and versatile.
Takedown request View complete answer on pooldawg.com

How do I know if my pool cue is good?

What things are important in selecting a cue?
  1. Make sure the tip and ferrule are firmly attached to the end of the cue, with no cracks in the ferrule or cue wood.
  2. Make sure the tip is not hardened and glazed-over on the surface. ...
  3. Make sure the cue is straight. ...
  4. Choose a cue weight that feels the most comfortable.
Takedown request View complete answer on billiards.colostate.edu

What are sneaky Pete cues?

A Sneaky Pete is designed to look like a poorer quality, traditional house cue instead of a custom cue. The idea behind this was that people would underestimate the capabilities of their opponent and be susceptible to being hustled.
Takedown request View complete answer on ozonebilliards.com

Do pool cues make a difference?

If by chance you wish to up your pool/billiards/snooker game, you might want to consider buying your cue. Can a cue make a difference? Absolutely. As is the case with other activities such as bowling, golf, frisbees and darts, using better equipment will usually result in more proficiency at the designated game.
Takedown request View complete answer on quedos.com.au

Are carbon fiber pool cues good?

Advantages of a carbon-fiber (AKA graphite) shaft include: It is smooth and has very little friction, especially with an open bridge. It stays cleaner than a wood shaft, which can be difficult to keep sealed, clean, and smooth (with no scratches or dings).
Takedown request View complete answer on billiards.colostate.edu

Do pros use low deflection shafts?

But let's do a little recap: Pro pool players use low deflection shafts because the low endmass in the cue helps improve accuracy. They limit the need to adjust your aim to compensate for deflection, which leads to fewer squirts and miscues.
Takedown request View complete answer on supremebilliards.com

Should I break cue heavy or light?

In general, a lighter cue will allow more control over finesse shots, and a heavier cue will allow more cue ball (CB) speed with less apparent stroke effort. A heavier cue might also be easier for some people to keep on line during the stroke, but this is a very individual thing.
Takedown request View complete answer on billiards.colostate.edu

Do I need a low deflection shaft?

There is no such thing as a no-deflection shaft, but the low-deflection shafts certainly make a real and useful difference. To the extent the shaft can happily bend off the side of the cueball, the ball squirts less. That doesn't mean a whippy shaft is appropriate.
Takedown request View complete answer on pooldawg.com

Why is my pool vacuum so weak?

Rule out the obvious causes of poor vacuum first. Make sure the water level in the pool is sufficient and air is not being sucked in through skimmer inlets. Add water to the pool to submerge the skimmers if necessary. Verify that the pump strainer basket and the skimmers are free of debris that may obstruct water flow.
Takedown request View complete answer on homeguides.sfgate.com

What causes low suction in pool?

Low suction is often caused by a blockage in the pool equipment. The key player in all suction-related issues is your pool impeller, so service it regularly. Clean everything once a week to prevent a build-up of debris.
Takedown request View complete answer on poolresearch.com

What is the best cue tip in the world?

Phenolic tips are among some of the most popular billiard cue tips for breaking as they can transfer the most power to the cue ball and require almost no maintenance.
Takedown request View complete answer on fcibilliards.com

What cue tip do most pros use?

Medium-hard tips

This is the most common cue tip, and it gives players a good balance of cue ball control and consistency. Medium-hard tips also require less maintenance than soft tips.
Takedown request View complete answer on pearsoncues.com

What weight cue do most pros use?

What is the standard cue weight? A: The pros use cues which weigh 19 to 19.5 ounces. Available pool sticks range from a low of about 15 to as much as 27 ounces, an extra half-pound over the pro cue.
Takedown request View complete answer on ozonebilliards.com

How do you know if deflection is too high?

How to Determine if Beams are Overloaded
  1. Observe the beam deflection. The maximum allowed deflection is beam length divided by 180. Deflection greater than this is an overloaded beam. ...
  2. Check the connection at the frame. Inspect the area where the beam connects to the frame.
Takedown request View complete answer on steelking.com

What is too much deflection?

If the floor deflects more than the 0.4 inches or 0.6 inches, the floor is deflecting more than what the standard allows and does not meet code. For an older home, the deflection usually exceeds the current code requirements. Settlement for these homes can commonlybe 1” or more!
Takedown request View complete answer on myteamengineering.com

How much deflection is too much?

How much deflection is acceptable? At normal design working loads, beams are typically designed to accommodate vertical deflections that do not exceed 1/180 (or 0.55 percent) of the horizontal beam length as measured with respect to the ends of the beams.
Takedown request View complete answer on boldapproved.com
Previous question
What does 5500U mean?
Close Menu