What size is my round table?

Diameter – On circular tables, the diameter is the length across the top from side to side, through the center. An easy way to find it is to hold the end of a measuring tape and one spot, extend it to the other side, and then slowly move the extended end back and forth until you find the longest point.

How do you determine the size of a round table?

-A table's DIAMETER, which is only used for measuring round tables, can be found by measuring across the top of the table (end to end) -- from the widest part of the table. The round table pictured above has a diameter of 72 inches.

What is the standard size of a round table?

Round Tables:

Common diameters for a round table are 36” round (for two people). 42” and 48” round (for four people) 54” or 60” round (for six people).

How do I know what size round dining table to buy?

You can seat four people at a table that is between 36" and 44" in diameter; four to six people will fit at a table that's 44" to 54" in diameter, and your table should be 54" in diameter or larger to fit six to eight diners.

What size is a round table for 8?

Round Table for 8 people: we recommend a minimum of 72 inches in diameter, although if you have enough space it would be advisable to have a round table of 84 inches in diameter.

Round Tablecloths Sizing Guide | BalsaCircle.com

How many people can fit at an 8 foot round table?

When figuring out seating you want to plan on about 2 feet for each person. With this in mind an 8 foot banquet table will comfortably be able to hold 8 people ( 4 people on each side). You may also be able to squeeze an additional 2 people by putting a seat at each end of the table.

How do you see if a round table will fit?

Multiply the diameter of the table by 3.14 and divide the result by 24 inches for the number of chairs that can fit comfortably around the table. For example, if the diameter of the table is 60 inches, the table can comfortably accommodate seven or eight people.

Can you seat 10 at a 60 inch round table?

Many rental companies will state that a 60” Round Table can accommodate 8-10 guests. Although this is true, 10 chairs would be rather tight. We suggest a maximum of 8 guests per 60” Round Table. A 48” Round Table can comfortably seat 4-6 guests, and the larger 72” Round Table can comfortably seat up to 10.

How many people can sit at a 48 inch round table?

Round Dining Tables

A 42″ round table can fit four people comfortably. A 48″ round table can seat 4-6 people comfortably. A 60″ round table can seat between 6-8 people comfortably.

What size are hotel round tables?

The three common sizes used for most banquet hall round tables include: 60 inch (5ft) round banquet tables. 66 inch (5.5ft) round banquet tables. 72 inch (6ft) round banquet tables.

Do round tables take up more space?

Space Saving

If you have a small house or dining room, bear in mind that round tables take up less space. They have a smaller surface area than their rectangular counterparts so will fit into tighter spaces much more easily.

What is the difference between 36 and 42 round table?

A 36" table top can usually accommodate 4 people. A round 42" table top can usually fit 4 or 5 people, or up to 8 people at a 42" square table. A round 48" table top can usually accommodate up to 5 or 6 people, while a 48" square table can comfortably fit 8 guests.

Can I fit 9 people at a 60 inch round table?

A 60” round table can seat up to 8 adults. A 72” round table can seat up to 10 adults.

Can you fit 8 chairs around a 60 inch round table?

A 60″ round table can seat between 6-8 people comfortably.

Can 10 people fit at a 5 foot round table?

How Many People Can Sit at a 60 Inch Round Table? You can fit 8 seats at a 5 foot round table (60 inches round).

How big should your room be for a 60 inch round table?

Use 8 sq ft if you are using 8 foot tables with 10 at each table. Use 10 sq ft per person if you are using 8 foot tables with 8 per table, 60 inch round tables with 10 people per table or 72 inch round tables with 12 per table.. Use 12 sq ft per person for 60 in round tables with 8 per table or any other round table.

How much overhang should a round table top have?

As a general rule, a glass tabletop should not overhang its base by more than one-third of its width. That means that a 54-inch-diameter glass table should sit atop a base that's at least 18 inches in diameter, allowing for a maximum of 18 inches of overhang at all sides of the base.

How much room do I need for a 60 inch round table?

You will want to have at least 24 inches between the table and walls for people to feel relaxed and have enough room to comfortably move around. Keep in mind that if you need more of a walkway between the table and the walls that 38 inches is a better number to shoot for.

What size tablecloth do I need for a 60 inch round table?

Tablecloth Sizes for Round Tables

60” table – Use either a 120” round tablecloth that reaches the floor or a 90” square tablecloth over a round tablecloth. 48” table – Use either a 108” round tablecloth that touches the floor or a 54” square tablecloth that sits over a round tablecloth.

How big is a round table for 10 people?

What size round table seats 10? A round table that's 8 feet in diameter can seat 10 to 12 people.

How many people can sit at a 66 inch round table?

A 120" linen will fit almost to the floor on this 66" round table. You can seat 8 to 10 guests at this size table. Dimensions: 66" Diameter x 30" H.

What is an 8 seater standard table?

6 Seater: Minimum 180 x 80cm. 8 Seater: Minimum 220 x 90cm. 10 Seater: Minimum 270 x 90cm. 12 Seater: Minimum 330 x 90cm.

How much space do you need for a 72 inch round table?

There should be a minimum two-foot perimeter around the edge of the table for rugs, allowing for use of chairs and visual cohesion. Here's a simple formula for room space: You need at least 3 feet (36”) around the perimeter of the table. That means you need to add 72” to the width and length of the table.

Is 42 too wide for dining table?

Table Width. Table width is a bit easier since there is a pretty consistent industry standard for rectangular tables. The standard width is anywhere from 36 inches to 42 inches, but we recommend going no more narrow than 38 inches. This way there is plenty of room for decorations or family-style meals.