What size is the slate on a pool table?

Thicknesses can range from one-half inch to two inches. Most tables use a one-inch-thick bed made of 3-piece slate. This means there are three separate pieces of slate placed inside the table to make the bed. If you want a single-slate pool table bed, then the thickness is usually three-quarters of an inch.

How big is a pool table slate?

The larger the table, the bigger the slate bed. The thickness of the slate will also impact weight. A standard 3-piece slate bed pool table will most likely have a 1-inch thick slate bed, but it's not unusual to see tables with ½”, ¾” or ⅞” slate beds. Most pool tables with one-piece slate beds will be ¾” thick.

How thick should slate be on a pool table?

Pool table slate varies by a thickness ranging from two to three centimetres. However, according to the Billiards Congress of America, one-inch slate (2.5 centimetres) is the most accurate. That's why most tournaments require tables with at least 2.5cm slate to be used.

Is a 1 piece or 3 piece slate better?

A three-piece slate, leveled properly, will without a doubt give you superior play. This is why the pros prefer to shoot on a three-piece slate pool table as opposed to a one-piece. I'd recommend a three-piece slate over one solid slate if given the choice.

How heavy is 3 piece slate pool table?

The average pool table weights for slate bed pool tables are: 6-Foot Table – 500 Pounds. 7-Foot Table – 700 Pounds. 8-Foot Table – 1,000 Pounds.

MDF vs Slate Pool Tables - Which is Right For You?

Is it OK to stand on a slate pool table?

The key part to understanding why a pool table shouldn't be stood upon is its slate. The slate is a piece of flat stone that is often milled to precision, then covered in a cloth for pool. The slate is very fragile, and most importantly a very brittle material that doesn't offer much in the way of structural support.

What is the best substitute for slate on a pool table?

Slate Alternatives – The most common alternatives to slate pool tables are those made of wood, mostly fiberboard and plywood, but plastics are occasionally used as well. These tables are considered toys and will never play level and will not last long.

Does slate crack easily?

If you are looking for a durable floor material, slate in any reasonable thickness will not easily split or crack. Slate can split when exposed to very high temperatures. For example, some slate may crack if a very hot fire is lit directly onto the slate.

How much does a 4x8 slate pool table weigh?

A typical in-home 4' x 8' birch pool table with 5-inch hardwood rails, rubber bumper cushions, drop pockets, and a 3-piece, 1" slate bed, for example, would weigh around 700 pounds. The average weight of an 8-foot table is between 700 and 1,000 pounds, with newly made tables being lighter on average.

How much does it cost to Refelt a pool table?

It costs $300 on average to refelt a pool table, with a typical price range of $250 to $300. You may pay as little as $150 or as much as $500. Pool tables come in three sizes, and size affects the price. The cost of pool table refelting is fairly evenly split between materials and labor.

Can you move a slate pool table without taking it apart?

Before you move your pool table, it's strongly recommended to take it apart. Pool tables are not designed to be moved in one piece. You will need to disassemble the legs, felt, rails and slate and then reassemble them in your pool table's new location.

What is the best thickness for slate?

For a quarry to be profitable it has to split the slate at the most optimum thickness – as thinly as possible to maximise profit, whilst producing slate with the strength needed to meet its purpose. Although this varies from quarry to quarry, this optimum thickness tends to average at around 4-6mm.

What is the disadvantage of slate?

While slate is a very hard flooring material, it is also quite brittle, so if something heavy is dropped on it, the tile is likely to break. Because slate is such a hard flooring material, it can be painful to stand on for long periods of time.

What is the minimum thickness of slate?

Standard slates are ¼-inch (0.64 cm) thick, plus or minus 1/16-inch. They vary in length and width by no more than 1/8-inch and have a relatively smooth face.

What is a cheaper alternative to slate?

Are slate pool tables worth the money?

If you are a serious pool player practicing for a tournament, or a pub player who wants the same performance that you get in the bar, then a slate bed table will provide the game performance you're looking for. As slate bed tables are real sports equipment, the components will be of the highest quality.

Are slate pool tables worth it?

Slate provides a superior quality material than wood. Slate provides a higher quality playing surface. Slate pool tables retain their value, and some even increase in value over time. Most people prefer to play on slate pool tables.

Should a pool table be covered when not in use?

Unlike other kinds of tables, a pool table needs to be covered when not in use. This prevents dust and other particles from settling on the felt surface and messing up the playing area. Don't cover your pool table with just anything, however. A sizable tarpaulin mat should do well enough.

How hard is it to break a slate pool table?

Table slate is amazingly tough stuff, especially with the cloth covering, which helps distribute and dampen the force some. Jump shots, massé shots, and tapping down (even hard) will not cause damage to the slate, assuming there isn't a big hole in the cloth at the spot of impact.

How far off the ground should a pool table be?

There are also some other specific requirements, such as the height of the table has to be between 29.25 inches and 31 inches, the slates have to be at least an inch thick, and the rail width must be at least 4 inches but no more than 7.5 inches.

What's the heaviest part of a pool table?

The heaviest part of your pool table is the slate. Our tables feature 3 pieces of slate fitted to ensure perfect play, and these pieces weigh in between 150-250 pounds each.

What is the best slate for a pool table?

In particular, slate from the Liguarian region of Italy is traditionally considered the highest quality material for use in pool tables, and will typically be marked 'OIS', meaning Original Italian Slate. Italian slate is usually softer and therefore easier to work with.

Can you move a 3 piece slate pool table?

You can move a pool table a short distance without taking it apart as long with the help of several people and furniture sliders, but it could cause damage to the table and require the bumpers to be realigned, and the slate re-leveled. We recommend hiring professionals.

What is the most common slate size?

The most common size being the 500 x 250 mm - a “Countess” in old money. These days simply referred to by its size in metric or imperial measurements, 500x250 mm or 20x10 respectfully. The further north you get the smaller the roof slate tile generally and the greater the over-lap (lap) to ensure a weatherproof roof.