Skip to main content

Which pool cue tip is best?

Phenolic tips are among some of the most popular billiard cue tips for breaking as they can transfer the most power to the cue ball and require almost no maintenance.
Takedown request View complete answer on fcibilliards.com

What is the best pool cue tip shape?

Therefore, a rounded tip is better than a flat tip. You shape the tip with a tip scuffer, a file, a piece of sandpaper, and other similar abrasive tools. Most players like their tips rounded with the radius of either a nickel or a dime; a coin can be held next to the tip for reference.
Takedown request View complete answer on billiards.colostate.edu

Is a nickel or dime cue tip better?

Tips shaped to a dime have a smaller contact point with the cueball, so in theory they can create more spin, but the smaller “sweet spot” can be slightly less forgiving. I prefer a nickel shape, personally, because I find that a nickel is more forgiving and versatile.
Takedown request View complete answer on pooldawg.com

Is a soft or hard tip better for pool?

A harder tip has a slightly better hit efficiency (energy transfer) than a softer tip. This will result in slightly more CB speed for a given stroke speed. This can provide a slight advantage for draw shots, where, where slightly more CB speed will retain slightly more backspin on the way to the OB.
Takedown request View complete answer on billiards.colostate.edu

How do I choose the right cue tip?

It should always be the same diameter as your shaft – no smaller. A smaller tip will give you more control over spin, but may also cause more miscues. A larger tip will give you less spin control, but a more powerful, consistent shot. With American cues, the standard size is usually around 12 or 13mm.
Takedown request View complete answer on libertygames.co.uk

Top 5 Best Pool Cue Tips in 2022 reviews

What size tip do most pro pool players use?

Generally speaking most pool players prefer and 8mm to 8.5mm tip for a 1 & 7/8 pool cue ball, and most snooker players prefer a 9.5mm to 10mm tip for a full size 2 1/16 snooker cue ball. American pool uses an even bigger cue ball so the tip sizes are normally between 12.5 mm and 13.5mm.
Takedown request View complete answer on bluemoonleisure.com

How often should you change your cue tip?

When or how often should you replace a cue tip? Usually, a tip is replaced either when you want to try something new or if your current tip has worn down too low, where there is almost no tip material left on the shoulder of the ferrule.
Takedown request View complete answer on billiards.colostate.edu

What weight cue is best?

Pool, snooker and billiard cues range from 17 ounces to 21 ounces, and we recommend a cue between 17 to 19 ounces for snooker and standard English and Australian pool playing. A heavier cue (between 20-21 ounces) is often recommended for American Pool as the balls and table are bigger.
Takedown request View complete answer on thecueshop.com.au

What hardness of cue tip should I use?

If you're the type of player that likes to work the cue ball around the pool table, then a soft tip is what you should play with. Unfortunately, though, softer tips tend to "mushroom" and need maintenance more frequently. Medium Hard Tips - are the most commonly used type of cue tip.
Takedown request View complete answer on ozonebilliards.com

What size pool cue tip is best for beginners?

The standard pool cue tip diameter is 12.75mm – 13mm, which is the perfect size for beginners. You can get plenty of spin and draw with the standard sized tip and it's still very forgiving for straight shots.
Takedown request View complete answer on pooldawg.com

What is the hardest pool cue tip?

Here is a summary of some durometer hardness test results from FLYINGSNAIL on AZB:
  • SAMSARA JUMP – 86.0.
  • BLACK DIAMOND – 81.0.
  • SUPERPRO – 81.0.
  • WB USA – 77.0.
  • BLUE ELF – 76.0.
  • LePRO – 74.5.
  • TALISMAN – (M) 70.5.
  • TAD – (M) 75.0.
Takedown request View complete answer on billiards.colostate.edu

Should I sand my cue tip?

The light ferrule-end sanding will help the glue bond better. Make sure all tip material and glue is removed before continuing. You should also wipe off any dust on the top of the ferrule with a clean rag or paper towel (and optionally clean with acetone) to ensure a clean gluing surface.
Takedown request View complete answer on billiards.colostate.edu

What weight cue do professionals use?

Select the Right Cue Stick Weight

While professional billiards players tend to use pool sticks that weigh about 19 ounces, it is a better idea for beginners to use pool sticks that are a bit lighter (around 15 ounces) while they are still learning how to pocket those tough shots with ease.
Takedown request View complete answer on auroraroadbilliards.com

What size cue do professionals use?

If you are mostly playing an eight-ball pool game, the stick you would generally use is about 1.39 to 1.44 metres or 55-57 inches. Some manufacturers provide up to 58 inches. Professional players opt for between 56 and 57-inch cues because they believe these are the perfect sizes for the cue ball.
Takedown request View complete answer on quedos.com.au

What ounce cue stick is best?

Typical weights for pool cues range between 18-21 ounces. Most players begin with a 19 oz. cue stick. Using a lighter weight stick (18-19 oz.) will create more "snap" in your shot; your cue ball will be dynamic and your object ball will go into the pocket at a slower pace.
Takedown request View complete answer on familyleisure.com

How often should I chalk my cue?

How Often Should You Chalk Your Cue? Some players find success re-chalking after every other shot, but others prefer to re-chalk before each shot they take. You can chalk your cue more sparingly if you want, but if you need to take a shot with some spin, it's a good idea to apply some chalk.
Takedown request View complete answer on imperialusa.com

Should I break with my playing cue?

It is best to use a dedicated break cue, which is beefier and has a hard tip (usually phenolic). Power breaking with your normal playing cue can cause damage over time, and it will flatten the tip. It is advisable to use a break cue with a natural pivot length well matched to your preferred break bridge length.
Takedown request View complete answer on billiards.colostate.edu

Should I scuff a new cue tip?

Scuffing allows the cue tip to hold chalk better and will ensure you get better shot control or English. The additional texture that scuffing creates can often give you an edge while playing. As you take more shots, your cue tip starts to flatten and smooth out, meaning chalk will have fewer spots to cling onto.
Takedown request View complete answer on cuecave.com

What cue tip does Efren use?

Tip: Kamui Original S. Shaft Length: 30 inches.
Takedown request View complete answer on thailandpooltables.com

Are graphite pool cues better?

Advantages of a carbon-fiber (AKA graphite) shaft include: It is smooth and has very little friction, especially with an open bridge. It stays cleaner than a wood shaft, which can be difficult to keep sealed, clean, and smooth (with no scratches or dings). It is easy and safe to clean with a damp towel.
Takedown request View complete answer on billiards.colostate.edu

What is the most used cue tip?

Medium-hard tips

This is the most common cue tip, and it gives players a good balance of cue ball control and consistency. Medium-hard tips also require less maintenance than soft tips. Most beginning and intermediate players will benefit from the medium-hard tip.
Takedown request View complete answer on pearsoncues.com

Is heavier cue stick better?

A heavier cue will tend to create more CB speed for a given stroke effort. A heavier cue might also be easier for some to keep on line during the stroke, but this is a very individual thing. More weight can also help prevent stroke deceleration.
Takedown request View complete answer on billiards.colostate.edu

Is a heavier or lighter break cue better?

The idea is that the lighter the cue, the faster you can swing it. And the faster you can swing it, the harder you can break. Because this theory revolves around acceleration and speed, lighter break cues are good for players who are able to be accurate with a fast, athletic break stroke.
Takedown request View complete answer on pooldawg.com

What to do with a new cue tip?

Re tipping a Cue

Apply glue to top of cue, ideally use 2 part epoxy glue, such as Araldite, or Gel superglue. Gently place tip on to the glue and carefully centre tip with ferrule. Then press the tip down firmly, wipe off excess glue then gently release pressure (hold pressure on for 1 minute if using super glue).
Takedown request View complete answer on parriscues.com

Why wont chalk stick to my cue tip?

The tip doesn't hold chalk when it is packed down from hitting the cue ball and the surface is slick. If you tap the tip to give the surface some texture, it will hold the chalk better.
Takedown request View complete answer on billiards.colostate.edu
Close Menu