Why are none of my PS4 controllers turning on?

Here are some possible causes, according to Asurion

Asurion

Asurion, LLC is a privately held company based in Nashville, Tennessee, that provides insurance for smartphones, tablets, consumer electronics, appliances, satellite receivers and jewelry.

https://en.wikipedia.org › wiki › Asurion

Asurion - Wikipedia

Experts: The controller's battery is dead. The controller was recently paired with another device, like a different PS4 or PC. The controller is too far from your PlayStation and is no longer connected via Bluetooth®.

Why won't any of my PS4 controllers turn on?

Turn off and unplug your PS4 console. Locate the small reset button on the back of the controller near the L2 button. Use a small tool to push the button inside the tiny hole. Hold the button down for roughly 3-5 seconds.

Why are none of my PS4 controllers working and all keep blinking?

The PS4 controller flashing white issue is generally caused by two reasons. One is because of the low battery, and that means that you need to charge your PS4 controller to make it back on track. The other reason is that your controller is trying to connect to your PlayStation 4, but failed due to unknown factor(s).

Why is my PS4 controller light blue but not working?

What does the blue light on a PS4 controller mean? If you see a blinking blue light on the PS4 controller, don't worry. It means the controller is trying to pair itself with the console and has nothing to do with the dreaded blue light of death.

What is the blue light of death on PS4?

This is an indicator from your PS4 system to let you know that there is a hardware or software issue within your PS4 setup that is preventing the PS4 from performing its usual functions. This can be down to several issues, allow us to list just a few of them below: HDMI issues. Faulty hard drive.

My PS4 Controller won’t Connect, No Detecting Ps4 Controller

How do I resync my PS4 controller?

On the PS4 controller you wish to sync, hold down the PS button and the Share button simultaneously for 5 seconds. When the new controller appears in the list of Bluetooth device, select it with the other controller. The new controller will then be synced with your PS4.

How long do PS4 controllers last?

How Long Does A PS4 Controller Last? An original Sony PS4 controller can last for 5 – 10 years without problems, provided there is no rough use on the users' end. While using a standard 1000mAh battery pack will power the PS4 controller for 4 – 8 hours of casual gaming before needing to recharge.

Why is my PS4 controller not resetting?

Hold the PS-button and Share-button simultanously for some seconds while the PS4 is turned on. This will reset all connections of the controller and searches for a new one. If this doesn't help, try different USB-cables after resetting. If that also doesnt work, your controller is probably damaged.

Why is my controller not turning on?

My controller won't power on

Verify that your controller batteries aren't causing this issue. If your controller won't power on at all, replace the controller batteries with fresh ones and make sure they're inserted correctly into the controller.

Why is my PS4 controller not charging and no light?

This can be resolved by power cycling, resetting, then updating the console. The USB cable could be worn or damaged, as over time, wires do eventually fail. In addition, some third-party cables are unsuitable for charging the PS4 controller. Your port might be damaged, so try plugging it into another.

Why is my PS4 controller glowing orange?

Usually, the orange light on PS4 controller means that your console is charging or in Rest Mode. But in some cases, it indicates there is something wrong with your console. There are some possible signals: The PS4 controller runs slowly.

How to hard reset PS4?

How do I resync my PS4 controller without cable?

You'll need to use a connected controller or a keyboard to put your PS4 into pairing mode. Go to "Settings" → "Devices" → "Bluetooth Devices" to enter pairing mode. On the controller, press the "SHARE" button and PlayStation button until the lightbar flickers. Select the controller.

How do I know if my PS4 controller is pairing?

While pressing and holding the SHARE button, press and hold the PS Button until the light bar flashes. Enable Bluetooth on your device, and then select the controller from the list of Bluetooth devices. When pairing is complete, the light bar blinks, and then the player indicator lights up.

How do you tell if your PS4 is broken?

When booting your PS4, the LED light on the side of your console should momentarily pulse blue before changing to white. But if your console has a problem, the blue light will pulse continuously without turning white. This is usually followed by your PS4 inexplicably turning off.

What is the white light of death?

Typically, this error indicates that there is no connection to the TV. Simple issues like a bad HDMI port connection or more serious problems like a fried IC chip in your PS4's HDMI port can cause this issue.

What color should my PS4 light be?

The console is on and working normally. This light may appear yellow or amber to some. After a few seconds, the console light should stay solid orange. Rest mode is a low-power state when the console can charge controllers, download and install content.

How do I know if my PS4 controller battery is working?

The charge level of the battery appears on-screen when you press and hold the PS button. While the system is in rest mode, the light bar slowly blinks orange. When charging is complete, the light bar turns off.