Why did my power a controller stop working?

Defective Cable

Your cable may be defective and will not power your controller at all. If this is happening, you have to buy a new cable and replace it.

Why is my PowerA controller not working?

Your batteries in the controller may be too low or drained for the controller to turn on. You may need to replace your batteries.

How do I reset my PowerA controller?

Hold the assign button down for 2 seconds. The PowerA logo will slowly flash, signaling the controller is in assign mode. Press and hold the assign button for 5 seconds to reset to no function.

Why did my controller suddenly stop working?

Your controller needs new batteries. The firmware in your controller needs to be updated. Your controller is too far away from the gaming console. There are too many devices connected to your gaming console.

Why is my PowerA Xbox controller not turning on?

If your controller won't power on at all, replace the controller batteries with fresh ones and make sure they're inserted correctly into the controller. Note The Xbox Elite Wireless Controller Series 2 uses a built-in battery, so if you're using an Elite Series 2, skip this step.

How to *FIX* The "Survive Storm Phases While Carrying a Weapon of Epic Rarity or Higher" Challenge !

How do I reset my PowerA wired Xbox controller?

Hold the program button down for 2 seconds. The center LEDs will slowly flash red, signaling the controller is in program mode. Press and hold the program button for 5 seconds to reset to no function.

How do I get my PowerA Xbox controller to work?

If Xbox is Off, connect the USB cable between available USB port on Xbox and Micro-USB port on controller. Press the Xbox Button on controller until console powers On. The small LED will illuminate to indicate connection successful.

Why isn't my Xbox controller working even though its on?

Try pressing and holding the Xbox button on the controller to turn it back on. If that doesn't work, the problem might be due to a drained battery. If you're using a wireless controller, try changing the batteries or connecting its charging cable.

Why is my PowerA controller not charging?

A1: Confirm you properly installed the included battery pack and battery door. A2: Confirm the Charging Stand is properly connected to a powered USB port. A3: Confirm you pushed down when placing the controller on the Charging Stand.

Does the PowerA controller need batteries?

A: PowerA Wireless Controllers take two AA batteries.

Are PowerA controllers legal?

Officially Licensed Product: This PowerA Controller is officially licensed for Xbox Series X|S, and is compatible with Xbox One and Windows 10 platforms.

Do PowerA controllers work well?

Our Verdict. The PowerA Enhanced Xbox Controller might be a budget option, but it's no slouch. It comes with tons of functionality both for use with the Xbox and those who need a controller for PC gaming as well. Ultimately, it performs almost as well as the official controller but costs only half as much.

Does PowerA controller have a warranty?

If you experience any problems with a PowerA product, you may qualify for product replacement. PowerA offers a non-transferable, two-year replacement warranty with proof of purchase; please retain your sales receipt.

Why is my wired Xbox One controller not turning on?

Plug a different USB-C cable into your controller and then plug the other end into your Xbox or PC. If the controller turns on when both ends are properly connected (the Xbox button  on the face of the controller will light up), the problem might be with the USB-C cable that came with your controller.

Why did my Xbox controller disconnect and won't reconnect?

If your Xbox controller keeps disconnecting, then you might just need to update the firmware. To check whether your controller has the latest firmware, go to Profile & system > Settings > Devices & connections > Accessories. This will allow you to check whether the firmware is up-to-date.

How do I know if my PowerA controller is charging?

The charging indicator LED above the Pro Controller will illuminate RED to indicate charging is in progress. When charging is complete, the indicator LED will turn GREEN.

Why is my Powera controller blinking?

Low Battery: A rapidly flashing LED indicates the Mini Pro Elite Wireless Controller's battery is low.