Why is my disc not reading Wii?

Cleaning the console with a lens-cleaning kit is your first step if the console isn't reading discs at all. The problem may be a dirty lens. If cleaning the lens doesn't help, perform a system update. If cleaning and updating don't do anything, contact Nintendo.

What should I do if my Wii won't read discs?

Can you fix disc reader on a Wii?

Most disc read errors (DREs) can be fixed by replacing the laser lens in your Wii's DVD drive.

Why is my Wii U not reading Wii disc?

Remove the disc and reboot the system: Eject the problematic disc if it is still in the system. Power the system off and ensure it is placed correctly. After 30 seconds has passed, power the Wii U back on.

How do you clean the disc sensor on a Wii?

It consists of a plastic paddle with an attached cleaning pad. You put 2-3 drops of the supplied cleaning fluid on the pad, then insert the paddle into the Wii's disc slot. You wiggle the handle 10-20 times to clean the lens. Press the Eject button to remove the paddle, and you're done.

Nintendo Wii Disk Read Error QUICK FIX

How do I reset my Wii sensor?

Take out the batteries, wait for one minute, and then reinsert them (there is no need to use new batteries). Wait a few seconds before pressing any buttons to wake up the Wii Remote. Resync the Wii Remote.

How do you clean the inside of a Wii?

Use a vacuum cleaner to remove any crumbs or light objects from inside the disc tray (caddy). The vacuum should be on its lowest setting.

How do I know if my Wii is bricked?

If the health screen is the last screen seen, then the brick is either a banner brick or a mail brick. To test this, hold + and - when pressing A; if the system still refuses to boot, it is a banner brick, otherwise it is a mail brick.

Are Wiis easy to fix?

Like its competitors at the time, the Nintendo Wii is a bit more complicated to dismantle and repair than Nintendo's previous generations that could be taken apart very easily. Nevertheless this console is quite simple to disassemble and repair, even without any knowledge of electronics.

How do you clean a disk?

Apply a dab of isopropyl alcohol to a clean cloth, and rub the disc from the center to the rim. Carefully wipe off moisture with a dry cloth with the same motions, then let sit for two minutes so it is completely dry.

Can you leave a Wii on its side?

The first step in connecting your Wii is to decide how you would like the console to rest. The Wii console is designed with two options in mind: laying it horizontally (flat), or sitting it vertically on its side by using the included Wii Stand and Stand Plate.

What can I use to clean my Wii?

Spray a dry cloth with Windex or Simple Green then wipe the system down. Be sure not to get the cloth too wet, because liquid can drip down into the system.

Can you replace the laser on a Wii?

It takes about 30min to an hour to change the laser and put everything back together. You will need to identify which laser your wii uses, there are 2 different model numbers. Make sure you are buying the correct laser for your case.

How does the Wii candle trick work?

Here's how to do it:

Place two lit candles roughly as far apart as the sensor bar is wide. In your Wii's settings, choose whether the candles are above or below the television just like you would for the sensor bar. Aim the WiiMote between the two candles and your pointer will respond on the screen like normal.

How do I know if my Wii sensor is working?

Adjust the camera angle and position until you can see the lights in the LCD display. If the lights are visible, the sensor bar is working. If the lights are not visible, the sensor bar will need to be replaced.

What is the Wii sensor called?

Gyroscope (with Wii MotionPlus adapter or Wii Remote Plus) Infrared sensor.

How to bypass Wii sensor?

To replace the sensor bar, simply light up a few candles near the TV, and bam – everything's back to normal. The reason why this works is because the Wii Remote relies on infrared lights to keep track of its position, and the candles' flames emit them.

How do you soft reset a Wii?

Complete These Steps:

While in a game, press and hold for one second the buttons START + SELECT + L + R. The screen will return to the beginning of the game without saving.

Where is the Wii sensor?

For below the TV Screen

Insert the Sensor Bar plug into the Sensor Bar connector on the back of the Wii console. Remove the protective film from the foam pads on the bottom of the Sensor Bar.