Why is my left Joy-Con not working?

Try resetting your controller, or if you have more than one, try resetting one controller at a time. Detach the Joy-Con controllers from the side of the device. Take one of the controllers and press the small, pin-sized Sync button on the top or side, then press any other button on the controller to restart it.

Why isn't my left Switch controller working?

- If the controller is not being recognized by the console, select "Change Grip/Order" to connect it. - If the left stick is not responding correctly, please rotate the left stick two or three times in large circles to calibrate. - Make sure that your console and software is updated to latest firmware.

How do I fix unresponsive L button Joy-Con?

Why is my left Joy-Con not charging and dead?

If the Joy-Con are not charging, try the following: Ensure that the console is powered on or in Sleep Mode. In order for the Joy-Con to charge while attached to the Nintendo Switch console, the console must be connected to the AC adapter and powered on or in Sleep Mode.

Why is my left Joy-Con drifting?

Joy-Con drift can often be attributed to one of two major factors: software/hardware issues or buildup of dirt and grime under or around the thumb sticks. If your console stops working, we'll handle the repairs. Make an appointment or visit your nearest store now.

My Left Joy-Con Is Not Working... (RANT)

Does Nintendo fix Joycons for free?

The good news is that even if your Switch is not under warranty, because of the widespread nature of the Joy-Con drift problem, Nintendo provides free repairs. Unfortunately, this doesn't extend to Switch Lite. To set up a Joy-Con repair, fill out the form on Nintendo's website then send the affected controllers.

Why is my L1 button not working?

If the L1 button isn't working it's probably not the actually plastic button that's broken it's more than likely the small switch under the button that's broken. You can buy replacement switches from some specialist electrical places like CPC in the UK (or I think Radio Shack in the US - if they're still going?)

How much does it cost to fix a Joy-Con button?

If you're outside the warranty, Reddit users had previously reported costs of $40 for an out-of-warranty repair, which is nearly the cost of a replacement single Joy-Con controller. (They run for $50 individually or $80 as a pair.)

How long is Joy-Con warranty?

Nintendo's North American warranty only guarantees that Joy-Cons will be "free of defects" for 12 months after purchase.

Can you repair Joy-Cons?

If your Switch is still under warranty, Nintendo should complete the repair for free. That said, even if you're outside the warranty period, Nintendo might repair the issue for free since Joy-Con drift is so widespread. Visit Nintendo's Joy-Con repair page and follow the steps to send your Joy-Con away.

What to do with faulty Joy-Cons?

Try fixing it by resetting the button maps. Connect your Joy-Cons to the Switch, open System Settings, then head to the Controllers and Sensors menu. Select Change Button Mapping at the top of the menu, then select Reset for each Joy-Con.

Does Nintendo fix broken Joy-Cons?

For your convenience, Nintendo offers a quick and easy-to-use online repair process. (This repair will be for your non-working Joy-Con controller only and is available in the U.S. and Canada only.)

Why is my R1 and L1 not working?

When r1 & l1 do not respond and also you can't activate rapid fire - it means the controller went into a sleeping mode which means the controller is not charged enough.

How do I fix my controller button?

Dampen the cotton swab with rubbing alcohol, dabbing off any excess. Rub the cotton swab around the sticky button. Be sure to clean inside the crevices. Once you've cleaned around the button as much as possible, press it a bunch of times to work the rubbing alcohol into the crevices and loosen any debris left behind.

How do I fix my button problem?

Do new Joy-Cons drift?

It's been a problem ever since the Switch came out and still hasn't been fully fixed in the new OLED model (although Nintendo says it's made some “improvements”). While you can send your Joy-Cons away for a free repair at Nintendo (or just buy a new set), the sticks will inevitably start drifting again.

Are Joy-Cons cheaply made?

The Switch's JoyCon controllers are cheaply made and break easily, and fans are fed up. There's a reason why Nintendo makes a profit on every Switch sold: the device is relatively cheap to make, and if you've ever held one, you can definitely see where they saved cash.

Why are Joy-Cons so hard to find?

In this case, the lack of Joy-Cons may stem directly from COVID-19. Back in February, Nintendo warned that production and delivery of products, including the Switch and Joy-Cons, could be impacted in Japan.

Does Nintendo fix drift for free?

Nintendo has been repairing Switch players' Joy-Con "drift" issues for free, even if they're no longer under warranty, in North America since 2019.

Do Joy-Cons always drift?

As reported by Eurogamer, a report from Which claims that, even after just a few months of use, the Joy-Con's plastic circuit boards show significant wear on the joystick slider contact points. This causes Joy-Con drift, an issue that Nintendo hasn't been able to fully address in the console's five years on the market.

How long does it take to fix Joy-Cons?

The current total turnaround time for repair orders is around 2-3 weeks.

Are Joy-Cons fragile?

After we've had some time with the little controllers, however, we've noticed some issues with them. They're more fragile than other controllers of past consoles, with their tiny components and propensity to develop the ever-irritating Joy-Con drift, where controllers register input despite none being made.

How common is Joy-Con drift?

According to UK consumer group Which?, 40 percent of Nintendo Switch users report that they have experienced issues with Joy-Con drift.

How many Joy-Con sets can I send for repair?

From there you'll get a free label for up to four Joy-Con: if you want to do more, you'll need to fill out another form. The “reason for repair” line is even optional, so that's what I mean by “non-invasive.”