Why is my PlayStation 3 controller not turning on?

Replace the Battery

If the controller won't turn on at all, the problem likely lies with the battery or the internal hardware. First, try removing the battery and re-inserting it: Use an eyeglass repair kit to unscrew the back of the PS3 controller. Look for a single small watch battery.

How do you revive a dead PS3 controller?

You can also press the reset button on the back of the controller with a paperclip (hold for 10 seconds or so), plug in, then press the PS button. This may allow you to charge your controller.

How do I get my PS3 controller to work?

Why is my PS3 controller blinking and not working?

It sounds like it's lost it's Bluetooth pairing with your console. It's easy to fix. Just plug the controller into the PS3 using a usb cable and hit the PS Button. It should stop blinking and assign itself to a port.

Why my PS3 controller won't charge?

Possible points of failure would be the controller's charging port, the cable, the port on the PS3. If possible, try another controller or try another cable. If those fail, your next option would be another PS3, but that one is much less feasible considering most don't have a spare console lying around.

How to Fix PS3 Controller, Easy Reset Ways!!!

Why is my PS3 controller charging no lights?

If the controller doesn't light up, the problem is with the cable. Use a different charger cable. In some cases, the problem may lie with a faulty or defective USB cord. Third-party USB cables often don't work with PlayStation technology, so if you buy a new cable, make sure it's from Sony.

How do you fix a dead PlayStation controller?

Why does my controller keep flashing but not turning on?

The batteries are low. Just plug in your controller to recharge its internal battery. Once it's charged, the blinking will stop. It's broken.

Why is my controller blinking and not turning on?

There are two main reasons you might see the flashing white light on your DualShock controller: either the battery is dying, or the controller failed to connect to your PlayStation console. Luckily, both of these things are fixable.

How long does it take for a dead PS3 controller to charge?

How long does PS3 controller battery last? The PS3 and PS4 controllers take 2 hours to fully charge. The charge will hold for about 2 weeks, with a daily average use of approximately 2 hours.

Does PS3 controller work without battery?

Can I open the controller ,take the battery out ,reassemble the controller and still use it via usb cable? Yes.

Can you overcharge a PS3 controller?

You cannot overcharge the ps3 controllers, they are self regulated internally. I use my cable box usb ports and a usb - miniusb cable.

Why do my PS3 controller lights flash then turn off?

It sounds like it's lost it's Bluetooth pairing with your console. It's easy to fix. Just plug the controller into the PS3 using a usb cable and hit the PS Button. It should stop blinking and assign itself to a port.

Does PS3 have a reset button?

PS3 System Needs to be Restored

Turn off your PS3. Enter Safe Mode by holding down the power button until you hear three beeps. Select "Restore PS3 System." This will perform a factory reset.

Why is my controller not turning on at all?

If your controller won't power on at all, replace the controller batteries with fresh ones and make sure they're inserted correctly into the controller.

What do I do if my controller wont turn on?

The cable could be worn out or broken. Make sure it's securely plugged in on both ends. If that's not the issue, unplug it from the Xbox One and plug it into a different USB port on the console. If the controller still won't turn on, disconnect the Play & Charge cable and try a different micro USB cable.

Why would a PlayStation controller stop working?

Common reasons your PS4 controller is not working

The controller was recently paired with another device, like a different PS4 or PC. The controller is too far from your PlayStation and is no longer connected via Bluetooth®. The Micro-USB cable that connects your controller to the console is faulty or disconnected.

How to charge PS3 controller?

Connect the Mini-B end of the USB Charging Cable to the Mini-B port located on your controller. Connect the other Mini-B end of the USB Charging Cable to the Mini-B port located on the USB Controller Adapter. Verify that the PS3™ console is powered “ON”. Charging will begin.

How long does a dead PlayStation controller take to charge?

Things You Should Know

A PS4 controllers takes about 2 to 2.5 hours to fully charge if it's completely dead. After about 1 to 1.5 hours of charging, your PS4 controller will be about halfway charged. The controller will charge more slowly if you're using it while charging.

How do I reset my PS3 without a remote?

You'll have to do this from the console itself, as your controllers are likely frozen as well. Hold the Power button for about 30 seconds. You'll hear three rapid beeps and your PS3 will turn itself off. Wait a few seconds, then press the Power button to turn it back on.