Why is my PS4 controller just OK but blue and not working?

What does the blue light on a PS4 controller mean? If you see a blinking blue light on the PS4 controller, don't worry. It means the controller is trying to pair itself with the console and has nothing to do with the dreaded blue light of death.

What does it mean when your PS4 controller is light blue but not working?

Locate the small reset button on the back of the controller near the L2 button. Use a small tool to push the button inside the tiny hole. Hold the button down for roughly 3-5 seconds. Plug in your console, connect your controller using a USB cable and press the PS button.

What do PS4 controller lights mean?

The light bar on the controller is used to identify the player in the game. Player 1 is blue, player 2 is red, player 3 is green, and player 4 is pink. [n] If you disconnect your DualShock 4 and for some reason the light turns white, hold the ps button for 15 seconds and the controlller will reset.

What is the blue light of death on PS4?

This is an indicator from your PS4 system to let you know that there is a hardware or software issue within your PS4 setup that is preventing the PS4 from performing its usual functions. This can be down to several issues, allow us to list just a few of them below: HDMI issues. Faulty hard drive.

Why is my PS4 controller light blue and not blinking?

The light should turn solid blue shortly after your press the PS button. If it doesn't stop blinking, it could be due to one of the following reasons: Faulty PS4 hardware. If your PS4 won't turn on, your controller can't connect to it.

How To Fix The Flashing Blue Light Issue On PS4 | Updated Solutions [2022]

Can PS4 controllers just stop working?

If your DualShock 4 disconnects randomly while playing, there are a couple of remedies you can try. First, make sure your controller battery is charged. It sounds simple, but if the battery in your controller is almost dead, it may disconnect.

How do I resync my PS4 controller?

On the PS4 controller you wish to sync, hold down the PS button and the Share button simultaneously for 5 seconds. When the new controller appears in the list of Bluetooth device, select it with the other controller. The new controller will then be synced with your PS4.

Why is my PS4 white light not turning blue?

If the indicator light only blinks white, or if the blue light never transitions to solid white, the console is frozen and needs troubleshooting. Follow the troubleshooting steps below: Unplug the console. Wait 60 seconds, plug the console back in, and turn it back on.

Why did my controller suddenly stop working?

Your controller needs new batteries. The firmware in your controller needs to be updated. Your controller is too far away from the gaming console. There are too many devices connected to your gaming console.

Why won t my controller connect?

Try pressing and holding the Xbox button on the controller to turn it back on. If that doesn't work, the problem might be due to a drained battery. If you're using a wireless controller, try changing the batteries or connecting its charging cable.

How do I take my ps4 out of safe mode?

If Safe Mode still doesn't launch, try power cycling your console. Completely turn off the console by holding the power button. Wait for the power light to stop flashing, then remove the power cable and leave the console for 20 minutes.

Why did my PS4 controller stop working all of a sudden?

Common reasons your PS4 controller is not working

The controller's battery is dead. The controller was recently paired with another device, like a different PS4 or PC. The controller is too far from your PlayStation and is no longer connected via Bluetooth®.

How many years do PS4 controllers last?

A PS4 controller has a life of about 4 – 5 years before the analog and buttons start to break or drift. This can be due to mishandling or dust buildup.

Why won't my PS4 controller connect even after reset?

If your PS4 controller won't connect, try a different USB cable, in case the original one has failed. You can also reset the PS4 controller by pressing the button on the back of the controller. If your controller still won't connect to your PS4, you might need to get support from Sony.

What do the colors of the PS4 controllers mean?

The color that is assigned depends on the order in which each user presses the PS button. The first controller to connect is blue, the second is red, the third is green, and the fourth is pink.

Why is my controller flashing but not working?

Check the controller for problems like loose connections or malfunction. If the controller is out of sync with the console, sync it up again. A blinking controller could also be caused by cable interference, an overheated console, a broken controller, among other things.

Why is my controller flashing but not turning on?

The batteries are low. Just plug in your controller to recharge its internal battery. Once it's charged, the blinking will stop.

Why is my controller blinking and not working?

A blinking controller is trying to get your attention and alert you to an issue. It's usually weak batteries or because the controller is no longer paired. Recharging or replacing its batteries usually does the trick. If not, pairing the controller to your console again may resolve the issue.