Skip to main content

Why is my PS4 controller light on and not working?

Here are some possible causes, according to Asurion Experts: The controller's battery is dead. The controller was recently paired with another device, like a different PS4 or PC. The controller is too far from your PlayStation and is no longer connected via Bluetooth®.
Takedown request View complete answer on asurion.com

Why is my PS4 controller light on but not connected?

If your PS4 controller won't connect, try a different USB cable, in case the original one has failed. You can also reset the PS4 controller by pressing the button on the back of the controller. If your controller still won't connect to your PS4, you might need to get support from Sony.
Takedown request View complete answer on businessinsider.com

Why is my PS4 controller light bar not working and not charging?

This can be resolved by power cycling, resetting, then updating the console. The USB cable could be worn or damaged, as over time, wires do eventually fail. In addition, some third-party cables are unsuitable for charging the PS4 controller. Your port might be damaged, so try plugging it into another.
Takedown request View complete answer on alphr.com

How do I resync my PS4 controller?

On the PS4 controller you wish to sync, hold down the PS button and the Share button simultaneously for 5 seconds. When the new controller appears in the list of Bluetooth device, select it with the other controller. The new controller will then be synced with your PS4.
Takedown request View complete answer on lifewire.com

How do I know if my dead PS4 controller is charging?

The charge level of the battery appears on-screen when you press and hold the PS button. While the system is in rest mode, the light bar slowly blinks orange. When charging is complete, the light bar turns off. It takes approximately 2 hours to charge the controller when the battery has no remaining charge.
Takedown request View complete answer on manuals.playstation.net

PS4 CONTROLLER NOT TURNING ON FIX

Why is my controller not pairing?

If you aren't able to connect to the console at all, replace the controller batteries with fresh ones and make sure the controller is powering on.
Takedown request View complete answer on support.xbox.com

Why is my controller not connecting and blinking?

The batteries are low. Just plug in your controller to recharge its internal battery. Once it's charged, the blinking will stop.
Takedown request View complete answer on lifewire.com

What color should my PS4 controller be when charging?

LED lights on the front screen indicate the charging state of the controller. Green light means the PS4 controller is charged and ready to use, red light means the PS4 controller is charging. Built-in safety features protect your controllers from overcharging which can damage the battery lowering its lifespan.
Takedown request View complete answer on orzly.com

How long do PS4 controllers last?

How Long Does A PS4 Controller Last? An original Sony PS4 controller can last for 5 – 10 years without problems, provided there is no rough use on the users' end. While using a standard 1000mAh battery pack will power the PS4 controller for 4 – 8 hours of casual gaming before needing to recharge.
Takedown request View complete answer on careergamers.com

Can a PS4 controller be completely dead?

If your controller suddenly and inexplicably seems 100% dead — no lights, no connection — then you likely have a USB issue. For reasons that aren't clear, these DS4 controllers appear to lose their ability to charge via USB after some length of time and won't even acknowledge when a cable is plugged in.
Takedown request View complete answer on osgamers.com

Do PS4 controllers lose battery life?

Typically, the DualShock 4 lasts for four to eight hours of play per charge (typically on the lower end of that range), far less than the Xbox One controller or the Nintendo Switch Pro controller. Why does the DualShock 4 battery die so quickly?
Takedown request View complete answer on digitaltrends.com

Do PS4 controllers have replaceable batteries?

The stock PS4 controller is equipped with a 3.7 V lithium polymer (LiPo) battery rated for a capacity of 1000 mAh. Replacement batteries are generally available in capacities ranging from 1200 mAh to 2500 mAh.
Takedown request View complete answer on makeuseof.com

Why did my controller just stop working?

Your controller needs new batteries. The firmware in your controller needs to be updated. Your controller is too far away from the gaming console. There are too many devices connected to your gaming console.
Takedown request View complete answer on asurion.com

Why is my controller not turning?

The cable could be worn out or broken. Make sure it's securely plugged in on both ends. If that's not the issue, unplug it from the Xbox One and plug it into a different USB port on the console. If the controller still won't turn on, disconnect the Play & Charge cable and try a different micro USB cable.
Takedown request View complete answer on lifewire.com

What do the LED mean on PS4 controller?

The light bar on the controller is used to identify the player in the game. Player 1 is blue, player 2 is red, player 3 is green, and player 4 is pink. [n] If you disconnect your DualShock 4 and for some reason the light turns white, hold the ps button for 15 seconds and the controlller will reset.
Takedown request View complete answer on ign.com

Why is my PS4 controller blinking orange but not connecting?

Why Is My PS4 Controller Flashing Orange? A blinking orange light on your PS4 means it is charging in rest mode. If your controller isn't charging while on standby, go to Settings > Power Save Settings > Set Features Available in Rest Mode > Supply Power to USB Ports and choose one of the options.
Takedown request View complete answer on lifewire.com

Why is my PS4 controller not connecting flashing white?

The PS4 controller flashing white issue is generally caused by two reasons. One is because of the low battery, and that means that you need to charge your PS4 controller to make it back on track. The other reason is that your controller is trying to connect to your PlayStation 4, but failed due to unknown factor(s).
Takedown request View complete answer on drivereasy.com

How to hard reset PS4 controller?

Locate the small reset button on the back of the controller near the L2 button. Use a small tool to push the button inside the tiny hole. Hold the button down for roughly 3-5 seconds. Plug in your console, connect your controller using a USB cable and press the PS button.
Takedown request View complete answer on playstation.com

How do I connect my PS4 controller without cable?

You'll need to use a connected controller or a keyboard to put your PS4 into pairing mode. Go to "Settings" → "Devices" → "Bluetooth Devices" to enter pairing mode. On the controller, press the "SHARE" button and PlayStation button until the lightbar flickers. Select the controller.
Takedown request View complete answer on wikihow.com
Close Menu