Why is my PS4 controller not connecting and just blinking?

The PS4 controller flashing white issue is generally caused by two reasons. One is because of the low battery, and that means that you need to charge your PS4 controller to make it back on track. The other reason is that your controller is trying to connect to your PlayStation 4, but failed due to unknown factor(s).

Why is my PS4 controller blinking blue but not connecting?

First, try resetting the controller and replacing the cable. If that doesn't fix the problem, you might need to use a different controller. If you're sure the battery or charging port on your controller is defective, you can replace it.

How do I resync my PS4 controller?

On the PS4 controller you wish to sync, hold down the PS button and the Share button simultaneously for 5 seconds. When the new controller appears in the list of Bluetooth device, select it with the other controller. The new controller will then be synced with your PS4.

Why won't my PS4 controller connect even after reset?

If your PS4 controller won't connect, try a different USB cable, in case the original one has failed. You can also reset the PS4 controller by pressing the button on the back of the controller. If your controller still won't connect to your PS4, you might need to get support from Sony.

How do you reset an unresponsive PS4 controller?

Locate the small reset button on the back of the controller near the L2 button. Use a small tool to push the button inside the tiny hole. Hold the button down for roughly 3-5 seconds. Plug in your console, connect your controller using a USB cable and press the PS button.

How To Fix PS4 Controller Blinking White!

Why is my PS4 controller blinking white?

A flashing white light on your PS4 controller usually indicates that the controller is trying to connect to the console. This can happen if the controller has been disconnected from the console or if you're using a new controller that hasn't been paired with the console.

How long do PS4 controllers last?

How Long Does A PS4 Controller Last? An original Sony PS4 controller can last for 5 – 10 years without problems, provided there is no rough use on the users' end. While using a standard 1000mAh battery pack will power the PS4 controller for 4 – 8 hours of casual gaming before needing to recharge.

Do PS4 controllers just stop working?

Common reasons your PS4 controller is not working

The controller's battery is dead. The controller was recently paired with another device, like a different PS4 or PC. The controller is too far from your PlayStation and is no longer connected via Bluetooth®.

Can you overcharge a PS4 controller?

Built-in safety features protect your controllers from overcharging which can damage the battery lowering its lifespan. Fully charge your two controllers within 3 hours and can be completed within 2.5 hours when charging one controller.

Do PS4 controllers go bad?

If your controller is dying too fast -- or worse yet, it simply won't turn on -- it could be due to a bad battery. Replacing it is pretty easy, thankfully. All you'll need to do is buy a replacement battery, a pair of tweezers, and then follow the instructions below.

Why is my PS4 controller glowing orange?

Usually, the orange light on PS4 controller means that your console is charging or in Rest Mode. But in some cases, it indicates there is something wrong with your console. There are some possible signals: The PS4 controller runs slowly.

How to hard reset PS4?

Why won t my PS4 stop blinking white?

If the indicator light only blinks white, or if the blue light never transitions to solid white, the console is frozen and needs troubleshooting. Follow the troubleshooting steps below: Unplug the console. Wait 60 seconds, plug the console back in, and turn it back on.

What do the colors of the PS4 controllers mean?

The color that is assigned depends on the order in which each user presses the PS button. The first controller to connect is blue, the second is red, the third is green, and the fourth is pink.

Where is the button to sync a controller to a PlayStation?

Why does my PS4 keep blinking blue?

The blue light of death could mean that your power or HDMI cables are damaged or faulty. Here's how to find out if that's the problem. Press and hold the Power button until your PS4 beeps twice and turns off. Disconnect all your PS4 cables.

What is the PS4 blue light of death?

This is an indicator from your PS4 system to let you know that there is a hardware or software issue within your PS4 setup that is preventing the PS4 from performing its usual functions. This can be down to several issues, allow us to list just a few of them below: HDMI issues. Faulty hard drive.

Why is my PlayStation just blinking?

If the indicator light only blinks white, or if the blue light never transitions to solid white, the console is frozen and needs troubleshooting. Follow the troubleshooting steps below: Unplug the console. Wait 60 seconds, plug the console back in, and turn it back on.

What do the colors of the PS4 controllers mean?

The color that is assigned depends on the order in which each user presses the PS button. The first controller to connect is blue, the second is red, the third is green, and the fourth is pink.

Why is my PS4 controller flashing white?

A flashing white light on your PS4 controller usually indicates that the controller is trying to connect to the console. This can happen if the controller has been disconnected from the console or if you're using a new controller that hasn't been paired with the console.

How do I fix my PS4 controller not connecting to my phone?

Navigate to Settings > Bluetooth and toggle off Bluetooth. Wait for a couple of seconds, re-enable your device's Bluetooth and reinitiate the pairing process (see method #1 above).