Why is my PS4 controller not connecting to PC?

If your PC is using an older version of Bluetooth or you have added the Bluetooth functionality using an external adapter, the PS4 controller might not be able to connect. Do not worry, as you can use a USB cable to connect. Make sure you have Steam or DS4Windows to support the controller before connecting the device.

How do I get my computer to recognize my PS4 controller?

The Bluetooth Method

Access the Bluetooth menu on your PC via the system tray. Click "Add Bluetooth or other device." Click "Bluetooth." Select the DualShock 4 controller from the list that pops up.

Why is my PC not recognizing my controller?

Without question, the very first thing you must do when you find out that your Windows PC is unable to recognize your gamepad is restart the gamepad. This is the same as turning the gamepad off, if it has an on/off button, and turning it back on. If that does not work, you can plug it into a different port.

Why is my PS4 controller pairing but not working?

Locate the small reset button on the back of the controller near the L2 button. Use a small tool to push the button inside the tiny hole. Hold the button down for roughly 3-5 seconds. Plug in your console, connect your controller using a USB cable and press the PS button.

Why is Windows 10 not detecting PS4 controller USB?

There are several reasons that might cause this issue: Power Supply issues, Power Management settings, Outdated or damaged USB drivers and damaged USB Ports. So I would suggest you try to check the above problems.

how to fix USB not working/ps4 controller not working on pc

Why is my DualShock 4 USB port not working?

This can be resolved by power cycling, resetting, then updating the console. The USB cable could be worn or damaged, as over time, wires do eventually fail. In addition, some third-party cables are unsuitable for charging the PS4 controller. Your port might be damaged, so try plugging it into another.

How do I sync my PS4 controller to my USB?

Why is my controller not connecting to PC USB?

Some USB devices, including incompatible or defective USB cables, can interfere with wireless signals. Unplug all USB devices connected to your Xbox or PC (wireless hardware, external hard drives, other wired controllers, keyboards, and so on). Restart your Xbox or PC and try connecting the controller again.

Why wont my controller turn on when I plug it into my PC?

One solution is to simply disable and enable Bluetooth connectivity again. Sometimes that's enough to solve the problem. If not, try removing the controller's batteries and ensure it's not connected via a USB cable. If this solution works, you can continue playing your games using the controller.

How do I get my USB controller to work on my PC?

If your joystick or gamepad is wired, connect the USB cable to any USB port available on the computer. If your joystick or gamepad is wireless, it should come with a USB receiver that transmits a signal to and from it. Connect that USB receiver to an available USB port on the front or back of your computer.

Why is my controller not pairing?

If you aren't able to connect to the console at all, replace the controller batteries with fresh ones and make sure the controller is powering on.

Why is my PS4 controller flashing white and not connecting?

The PS4 controller flashing white issue is generally caused by two reasons. One is because of the low battery, and that means that you need to charge your PS4 controller to make it back on track. The other reason is that your controller is trying to connect to your PlayStation 4, but failed due to unknown factor(s).

How do I resync my PS4 controller without cable?

You'll need to use a connected controller or a keyboard to put your PS4 into pairing mode. Go to "Settings" → "Devices" → "Bluetooth Devices" to enter pairing mode. On the controller, press the "SHARE" button and PlayStation button until the lightbar flickers. Select the controller.

Can a PS4 controller work on PC?

You can connect a DUALSHOCK 4 wireless controller to a Windows PC using a DUALSHOCK®4 USB wireless adaptor or a compatible micro USB cable.

How do I manually connect my controller to my PC?

Do all USB controllers work on PC?

Any controller that has two analog sticks, two shoulder buttons, and two trigger buttons, and is capable of connecting to your computer via USB, is usable with PC games. Some require more configuration than others, which we'll cover below.

Can I use a PS4 controller on my PC without Bluetooth?

You can connect your PS4 controller to a PC using a micro-USB cable or wirelessly via Bluetooth. With a USB, you can connect to your PC via Steam or DS4 Windows Utility.

Can you use a PS4 controller on Steam?

To pair the PS4 controller wirelessly with the Steam Link: Using another input device (wired mouse or controller), go to the Bluetooth settings. Simultaneously hold the PS and Share button on the PS4 controller until it enters pairing mode and starts flashing.

Can I connect controller to PC without Bluetooth?

The most straightforward way to connect your Xbox controller and PC is with a micro-USB cable (for Xbox One controllers) or a USB-C cable (for Series X|S controllers). Simply plug the slim end into your Xbox controller and the other end into a USB port on your PC.

How do I enable USB controller?