Why is my PS4 controller not working after reset?

Hold the PS-button and Share-button simultanously for some seconds while the PS4 is turned on. This will reset all connections of the controller and searches for a new one. If this doesn't help, try different USB-cables after resetting. If that also doesnt work, your controller is probably damaged.

Why won't my PS4 controller connect even after reset?

If your PS4 controller won't connect, try a different USB cable, in case the original one has failed. You can also reset the PS4 controller by pressing the button on the back of the controller. If your controller still won't connect to your PS4, you might need to get support from Sony.

Why is my PS4 controller flashing and not responding?

The PS4 controller flashing white issue is generally caused by two reasons. One is because of the low battery, and that means that you need to charge your PS4 controller to make it back on track. The other reason is that your controller is trying to connect to your PlayStation 4, but failed due to unknown factor(s).

Why is my PS4 controller blinking blue but not connecting?

First, try resetting the controller and replacing the cable. If that doesn't fix the problem, you might need to use a different controller. If you're sure the battery or charging port on your controller is defective, you can replace it.

How do I resync my PS4 controller?

On the PS4 controller you wish to sync, hold down the PS button and the Share button simultaneously for 5 seconds. When the new controller appears in the list of Bluetooth device, select it with the other controller. The new controller will then be synced with your PS4.

How to FIX PS4 Controller that Won't Connect (Hard Reset Method)

Can PS4 controllers just stop working?

If your DualShock 4 disconnects randomly while playing, there are a couple of remedies you can try. First, make sure your controller battery is charged. It sounds simple, but if the battery in your controller is almost dead, it may disconnect.

How do I resync my PS4 controller without cable?

You'll need to use a connected controller or a keyboard to put your PS4 into pairing mode. Go to "Settings" → "Devices" → "Bluetooth Devices" to enter pairing mode. On the controller, press the "SHARE" button and PlayStation button until the lightbar flickers. Select the controller.

Why is my PS4 controller blinking white?

A flashing white light on your PS4 controller usually indicates that the controller is trying to connect to the console. This can happen if the controller has been disconnected from the console or if you're using a new controller that hasn't been paired with the console.

Why is my ps4 controller orange and not working?

Usually, the orange light on PS4 controller means that your console is charging or in Rest Mode.

Why did my controller suddenly stop working?

Your controller needs new batteries. The firmware in your controller needs to be updated. Your controller is too far away from the gaming console. There are too many devices connected to your gaming console.

Why won t my controller connect back?

Try pressing and holding the Xbox button on the controller to turn it back on. If that doesn't work, the problem might be due to a drained battery. If you're using a wireless controller, try changing the batteries or connecting its charging cable.

What is the life expectancy of a PS4 controller?

A PS4 controller has a life of about 4 – 5 years before the analog and buttons start to break or drift. This can be due to mishandling or dust buildup.

How long can a PS4 controller last?

Typically, the DualShock 4 lasts for four to eight hours of play per charge (typically on the lower end of that range), far less than the Xbox One controller or the Nintendo Switch Pro controller.

How long does it take for a dead PS4 controller to work?

A PS4 controllers takes about 2 to 2.5 hours to fully charge if it's completely dead. After about 1 to 1.5 hours of charging, your PS4 controller will be about halfway charged. The controller will charge more slowly if you're using it while charging.

How do I know if my ps4 controller is pairing?

While pressing and holding the SHARE button, press and hold the PS Button until the light bar flashes. Enable Bluetooth on your device, and then select the controller from the list of Bluetooth devices. When pairing is complete, the light bar blinks, and then the player indicator lights up.

What do the light colors mean on PS4 controller?

The light bar on the controller is used to identify the player in the game. Player 1 is blue, player 2 is red, player 3 is green, and player 4 is pink. [n] If you disconnect your DualShock 4 and for some reason the light turns white, hold the ps button for 15 seconds and the controlller will reset.