Why is my PS4 controller on but not responding?

Restart Your Console

If your controller is working enough to access menus, hold the PS Button to open the Quick Menu, then go to Power > Restart PS4 to reboot your system. In case your controller isn't cooperating, press and hold the Power button on your PS4 console until you hear two beeps.

How do I fix my PS4 controller not responding?

Locate the small reset button on the back of the controller near the L2 button. Use a small tool to push the button inside the tiny hole. Hold the button down for roughly 3-5 seconds. Plug in your console, connect your controller using a USB cable and press the PS button.

Why are my PS4 controllers on but not working?

If your PS4 controller won't connect, try a different USB cable, in case the original one has failed. You can also reset the PS4 controller by pressing the button on the back of the controller. If your controller still won't connect to your PS4, you might need to get support from Sony.

Why is my PS4 controller light blue and not responding?

Check the cables

The blue light of death could mean that your power or HDMI cables are damaged or faulty. Here's how to find out if that's the problem. Press and hold the Power button until your PS4 beeps twice and turns off. Disconnect all your PS4 cables.

How do I force my PS4 controller to work?

PS4 Controller Not Connecting or Paring (Not Working)? 2 Easy Fixes

How do I reset my PS4 controller without the reset button?

Turn over the DualShock 4 controller and locate the small hole near the left shoulder button. Unfold one end of the paper clip and insert it to push the button buried inside the hole. Hold down this button for about 5 seconds. Connect the controller to the PS4 using a USB cable.

What is the PS4 blue light of death?

This is an indicator from your PS4 system to let you know that there is a hardware or software issue within your PS4 setup that is preventing the PS4 from performing its usual functions. This can be down to several issues, allow us to list just a few of them below: HDMI issues. Faulty hard drive.

What do the color mean on PS4 controller?

The color that is assigned depends on the order in which each user presses the PS button. The first controller to connect is blue, the second is red, the third is green, and the fourth is pink.

How much does it cost to fix the blue light of death?

We recommend having a professional diagnose and repair the necessary components on the PS4. Repair costs could range currently from $169.95 – $200 range depending on issue due to the high current price of replacement components.

How do you update a PS4 controller?

Use a USB cable to connect your controller to your Windows PC, and then follow the on-screen instructions to start the update. Don't turn off your Windows PC or disconnect the USB cable during the update. When the update is complete, a message appears.

How do I recalibrate my PS4 controller?

Press and hold L3 ad R3 for 30 seconds. Rotate the left and right thumb stick clockwise 5 times. Rotate the left and right thumb stick counterclockwise 5 times. Press and hold L3 and R3 again for 30 seconds.

How to hard reset PS4?

How do I fix an unresponsive controller?

What does a white light mean on a PS4?

If the indicator light only blinks white, or if the blue light never transitions to solid white, the console is frozen and needs troubleshooting. Follow the troubleshooting steps below: Unplug the console. Wait 60 seconds, plug the console back in, and turn it back on.

How to clean a PS4 controller?

Do not use water on the controller as it can damage the electronics. Instead, use a lint-free cloth dampened with rubbing alcohol. Gently scrub any stubborn dirt or grime with a toothbrush dipped in rubbing alcohol.

What color does PS4 controller turn when fully charged?

How do I know if a PS4 controller is fully charged? The controller's light flashes orange when it's charging. Once it stops flashing, your controller is fully charged. The other way to check it is when it's connected to your PS4, press and hold the ps button.

What are the light codes on PS4 controller?

Light Bar. The light bar on the controller is used to identify the player in the game. Player 1 is blue, player 2 is red, player 3 is green, and player 4 is pink. [n] If you disconnect your DualShock 4 and for some reason the light turns white, hold the ps button for 15 seconds and the controlller will reset.

Why is PS4 orange?

Solid Orange

Your PlayStation is in Rest Mode. This allows your PlayStation 4 to wake up on its own to download updates, and start-up quickly when you want to use it.

What is the rarest PS4?

2 Hitman Collector's Edition Briefcase PS4

The release of this PS4 was a one-of-a-kind experience. It is also considered one of the rarest PS4 consoles. As a way to celebrate the announcement for the sixth installment in the Hitman series, only one version of this PS4 exists.

Why is my PS4 controller blinking blue and not connecting?

The battery is dying.

Plug the controller directly into the console to let it charge. It can take up to two hours for the battery to charge completely. If your PS4 controller won't charge, it could be an issue with the charging port, charging cable, or the battery itself.

How do you tell if your PS4 is broken?

When booting your PS4, the LED light on the side of your console should momentarily pulse blue before changing to white. But if your console has a problem, the blue light will pulse continuously without turning white. This is usually followed by your PS4 inexplicably turning off.

How long do PS4 controllers last?

If you are playing a button mashing game like Street Fighter expect it to last a couple of years. If you are a casual gamer and only play light games with the controller, expect it to last longer than you expect.

Can you hard reset PS4 controller if PS4 was on?

On the back of your controller, near the L2 shoulder button, you will see a small hole. Into that small hole, insert a paper clip or a similar tool you've got. Keep the tool inserted (which will press the reset button inside) for about five seconds. Your controller is now reset and ready to be paired with your console.