Why is my USB full but no files?

If your USB says it's full, but no files are showing on your flash drive, it's most likely a logical issue like filesystem errors or bad sectors. Filesystem errors and bad sectors aren't exclusive to flash drives though. If you're unable to access your SD card, that could also be potentially because of a logical issue.

Why is my USB storage full but no files?

Reasons behind USB Drive showing empty but is full or vice-versa: The Data stored in USB Drive might have got corrupted due to Malware, bugs, or viruses. There might be a connection problem in either your USB Drive or the port of your PC. The files in your Drive being intentionally or mistakenly hidden.

How do I restore my USB to original full capacity?

How do I fix USB no files?

Connect the USB pen drive or flash drive to the PC. Step 2. Open Windows "File Explorer" > Go to "Tools" > "Folder" Options > Go to the "View" Tab > Check "Show hidden files, folders, and drives". Finally, click "Apply".

Why are my files not showing up?

Many factors can cause files not showing in the folder or Windows Explorer not showing extracted files. The most possible reason is your files are hidden. Other factors might be some malware or virus attacking your disk and hiding or even deleting your files so that you won't see them in the folder.

How to Fix USB Files Not Showing But Space Used Issue? [5 Solutions]

How do I reset a corrupted USB?

Then, type chkdsk /X /f G: (replacing G with your USB's drive letter) in the Command Prompt window and hit Enter. The chkdsk operation will start to repair the damaged USB drive. This command makes Windows check and fixes the file system on the flash drive.

Why is my 64GB USB only showing 32GB?

The file system of your USB drive is FAT32 not NTFS. Disk Management can only allow you to format an external hard drive to FAT up to 32GB. So, that's why you can't format a 64GB flash drive to FAT.

Why is my 32GB USB only 28 GB?

Well, you are not actually losing any space at all, your 32GB drive has 32GB of space. A small bit of that space is used when you format the drive, mostly used for the allocation table (a file showing where the parts of a file are written at, on a drive).

How do I view hidden files on my USB?

Select View > Options > Change folder and search options. Select the View tab and, in Advanced settings, select Show hidden files, folders, and drives and OK.

Are there hidden files in USB?

Hidden files are not uncommon especially in external storage devices like USB drives. Thanks to the solutions above, you can easily "unhide" the files and be able to access them easily. If they have somehow been deleted from the device, you can easily use Recoverit Data Recovery to recover the missing files.

Where do I find my hidden files?

How do I find missing hidden files?

Select the Start button, then select Control Panel > Appearance and Personalization. Select Folder Options, then select the View tab. Under Advanced settings, select Show hidden files, folders, and drives, and then select OK.

Is FAT32 limited to 32GB?

Microsoft chose 32GB as the maximum partition size for a FAT32 file system. The main reason for this was to promote its new file system (NTFS), considered more efficient when working with large partitions. Despite that, the 32GB limit on FAT32 has influenced the file system differently.

How do I format a USB to FAT32 bigger than 32GB?

How many files can a 32GB flash drive hold?

32GB – can hold approximately 20480 images, 7680 MP3 files, 600,000+ pages of Word documents, or 10240 minutes of video. 64GB – can hold approximately 40960 images, 15360 MP3 files, 1.2 million+ pages of Word documents, or 20480 minutes of video.

How do I change my 64GB to FAT32?

Why can't I format my 64GB USB to FAT32?

There are a few reasons why your USB drive might not be formatting to FAT32. The first reason is that your USB drive might be larger than 32 GB. As a result, it can't be formatted to FAT32. The second reason is that your USB drive might have been formatted using a different file system, such as NTFS.

Why is my SanDisk 64GB not recognized?

Check whether the SanDisk 64GB Micro SD card and the SD card adaptor are clean. If they are covered with dust, there will not be a good contact between them and the 64GB SD card could not be recognized by Windows. Therefore, you should make them keep clean, so that the SD card can be recognized.

How did my USB get corrupted?

Application, operating system, and driver bugs can all cause flash drive corruption by preventing files from being saved correctly or damaging the integrity of the file system. Files that have disappeared from a flash drive corrupted by software bugs can sometimes be recovered using the ATTRIB command.

How do I know if my USB is corrupted?

Signs of a Corrupted USB

A “File is not recognized” prompt when opening files from the USB. Being prompted with a message that says “Please insert a disk into USB Drive (H:)”, even when the USB is connected to the computer. The USB is not showing in Windows as a storage device when it's connected to the computer.

Can a corrupted USB be recovered?

How to Recover Corrupted Files from USB Using CMD. If your USB file system is corrupted, your USB cannot be opened and accessed. In addition to repairing damaged file systems with the Windows Disk check tool, you can also use the CHKDSK command lines in Command Prompt to fix the corrupted USB drive and recover files.

What is the highest GB for FAT32?

The FAT32 file system uses smaller clusters than the FAT file system, has duplicate boot records, and features a root directory that can be of any size and can be located anywhere on the disk or partition. The maximum possible size for a file on a FAT32 volume is 4 GB.

Is 128gb too big for FAT32?

Windows Disk Management or File Explorer won't allow you to create or format a FAT32 volume larger than 32GB, you can only choose NTFS or exFAT for the file system.

What file size is too big for FAT32?

What's the max size for FAT32? 4GB maximum file size: For FAT32, the maximum file size of a single file is 4GB. Specifically, you may run into trouble with an error such as "The file is too large for the destination file system", when you try to transfer files larger than 4GB to a FAT32 formatted drive.

Can hidden files be deleted?

Files and folders that have the hidden attribute enabled will be invisible to users who access a drive or folder. These hidden files are usually operating system (OS) files that should not be moved, modified, or deleted.