Why is Roger used for OK?

"Roger" was "phonetic" for "R" (received and understood". In radio communication, a "spelling alphabet" (often mistakenly called a "phonetic alphabet) is used to avoid confusion between similarly sounding letters. In the previously used US spelling alphabet, R was Roger, which in radio voice procedure means "Received".

What is Roger that slang for?

Here, the Roger stands for the initial R in “(Message) received.” To indicate a message had been heard and understood—that is, received—a service-person would answer Roger, later expanded to Roger that, with that referring to the message.

Where did the term Roger that come from?

The North Atlantic Treaty Organization said this early version was used by the Army and Navy. Radio operators would say “Roger” or “Roger that” to stand for the letter R and tell the sender the message was received. Roger wilco would mean, received and will comply.

Why do pilots say Roger?

So they took "Roger" from the U.S. phonetic alphabet. (In 1957, the English phonetic alphabet changed the R to "Romeo," but by that time, "Roger" was deeply embedded in the minds of pilots.) So, in short, "Roger" means "r" which stands for "received." The word "Roger" means nothing more.

What's the reply to Roger that?

"Wilco": Literally means "will comply" and indicates that the speaker is intending to complete the task that's been asked of them.

Why do PILOTS say "ROGER / WILCO"? Explained by CAPTAIN JOE

Why do military people say Roger?

In the previously used US spelling alphabet, R was Roger, which in radio voice procedure means "Received". While in the current spelling alphabet (NATO), R is now Romeo, Roger has remained the response meaning "received" in radio voice procedure.

What can I say instead of Roger?

On this page you'll find 41 synonyms, antonyms, and words related to roger, such as: absolutely, affirmative, agreed, all right, amen, and assuredly.

Why do pilots say pan pan?

The term pan pan, besides being known as airplane talk, is used in radiotelephone communications to signify that there is an urgency on board a boat, ship, aircraft, or other vehicle. It is referred to when it is a state of urgency, but not when there is an immediate danger to a person's life or to the vessel itself.

Why do they say 10 4?

10-4 is an affirmative signal: it means “OK.” The ten-codes are credited to Illinois State Police Communications Director Charles Hopper who created them between 1937–40 for use in radio communications among cops.

What does squawk 0000 mean?

0000 — A generic code that is not assigned and should not be used. 1200 — VFR aircraft. The default code for all flights–if you aren't asked to set anything else, you should set 1200. 7500 — Hijacking. 7600 — Voice radio failure.

What is Roger over and out?

On this subject, the word “Roger” is also misused frequently, but it too has a very definite and much misunderstood meaning: it means “I have received your last transmission.”

What does 10 4 mean in radio talk?

10-4. Message received; OK; acknowledged.

What means Wilco?

"Wilco" is short for "will comply," and means that the speaker will follow the instructions which they have been given. They used to sign off with, "Roger, wilco, over and out. " He explains many different slang terms used by pilots, such as "roger" and "wilco".

Why does the military say copy?

“Copy” has its origins in Morse Code communications. Morse Code operators would listen to transmissions and write down each letter or number immediately, a technique called “copying.” Once voice communications became possible, 'copy' was used to confirm whether a transmission was received.

What does Roger that mean in Hawaii?

This is another way to say “okay”. You'll also often hear “rahja” or “rahja dat”, which is derived from “roger that”, and can also mean “okay”, but usually with a bit more emphasis. Example: A: “You wanna eat?” | B: “Shoots! Let's go!”

What does 10-9 mean in CB talk?

10-9: Repeat Message. 10-10: Transmission completed, standing by. 10-11: Talking too rapidly. 10-12: Visitors present. 10-13: Advise weather/road conditions.

Why is mayday said 3 times?

Convention requires the word be repeated three times in a row during the initial emergency declaration ("Mayday mayday mayday") to prevent it being mistaken for some similar-sounding phrase under noisy conditions, and to distinguish an actual mayday call from a message about a mayday call.

Why do pilots say heavy?

Wake turbulence poses a major risk to other aircraft, so pilots and ATC use the term “heavy” in radio transmissions as a reminder that the aircraft's wake may be dangerous to others passing behind or below the flightpath of these larger-mass aircraft.

Why do planes squawk 7700?

Squawking 7700 in an emergency

The most well know of these is the code 7700. This is used to indicate an emergency of any kind. A pilot will enter this when in an emergency situation - either instructed by ATC after declaring an emergency or without communication if there is no time.

What is the old version of Roger?

"R" is the first letter in "received", used to acknowledge understanding a message. This spread to civilian usage as "ROGER" replaced "received" in spoken usage in air traffic radio parlance by 1950.

What does Wilco mean on radio?

wil·​co ˈwil-(ˌ)kō used especially in radio and signaling to indicate that a message received will be complied with.

What is the military term for understood?

1.) Roger That. “OK,” “Understood,” and “Yes, sir/ma'am” are all acceptable replacements for this military phrase. The general public will understand what you mean if you do slip up, but it is not a common saying among civilians.

What is the military term for yes?

14. “Roger that” This one is pretty common knowledge, though not all civilians may know why the military says, “Roger that,” rather than “yes.” Under the old NATO phonetic alphabet, the letter R was pronounced, “Roger” on the radio.