Why won't my Wii controller connect to the console?

Reset the Wii Remote. Remove the batteries from the Wii Remote. Replace the batteries, re-sync the remote, and see if the problem is resolved.

What to do if Wii Remotes won't connect?

Resync the Wii Remote by removing the battery cover and pressing the red 'SYNC' button. Then press the SYNC button on the Wii console. Do this for all Wii Remotes you wish to use and test for proper response.

How do I reset my Wii Remote?

Can Wii Remotes just stop working?

If after removing the batteries for several minutes, and resyncing the Wii Remote, you're still unable to get the Wii Remotes to work, try syncing another Wii Remote if available. If multiple Wii Remotes do not work, or you only have one Wii Remote, a repair of the Wii console is necessary.

Why does my Wii Remote flash blue then turn off?

The lights on the Wii Remote blink momentarily before turning off means that the Wii Remote is not paired with your system. Follow these steps to allow your Wii Remote to pair (or "sync") with your Wii console. Unplug the power cord from the Wii console, and let it sit for at least a few seconds.

How To Synchronize Wii Remotes

How long do Wii controllers last?

A fresh set of alkaline batteries should last, depending on amount and type of use, up to 30 hours. This can vary greatly based on certain factors such as Wii Remote Speaker Volume, Rumble, battery quality and age, and the type of game being played.

How do I know if my Wii Remote is broken?

If no lights on your Wii Remote come on, even with fresh batteries, it appears your Wii Remote may need to be replaced. You may find our information on replacement options helpful.

Why is Wii Remote just blinking?

The LED that is illuminated indicates the Player number. Blinking LEDs indicate the Wii Remote is attempting to sync. When the Player LEDs are blinking they will indicate the battery level. If only one or two LEDs are blinking, this means the battery is low.

How do I connect my Wii console?

Insert the AV Multi Out plug on the Wii AV Cable into the AV Multi Out connector on the back of the console. Once the cables are inserted and the Wii console is powered on, you must find the Input Select for your TV to view the game.

How do I add Wii Remote to Home menu?

Why won't my Wii read the disk?

If the discs look dirty or damaged, clean them. Sometimes a dirty disc can appear damaged, but just needs to be cleaned. If the disc plays without error, please continue to use your Wii as normal. The damaged disc(s) will need to be replaced.

How do you clean the disc sensor on a Wii?

You put 2-3 drops of the supplied cleaning fluid on the pad, then insert the paddle into the Wii's disc slot. You wiggle the handle 10-20 times to clean the lens. Press the Eject button to remove the paddle, and you're done.

How do you clean the disk for the Wii?

Dampen a clean, soft, cotton cloth with water. Use straight strokes and wipe the disc (non-labeled side) from the inside rim to the outside rim. Using a dry part of the cloth, repeat step 2 to dry the disc.

Why is my Wii Remote flashing blue and not working?

The lights on the Wii Remote blink momentarily before turning off means that the Wii Remote is not paired with your system. Follow these steps to allow your Wii Remote to pair (or "sync") with your Wii console. Unplug the power cord from the Wii console, and let it sit for at least a few seconds.

How do I know if my Wii sensor bar is broken?

Adjust the camera angle and position until you can see the lights in the LCD display. If the lights are visible, the sensor bar is working. If the lights are not visible, the sensor bar will need to be replaced.

What input does the Wii need to be on?

The Nintendo Wii's Default TV Cables

Shipping with the Nintendo Wii was a proprietary cable, the Wii AV Cable This connects to the Nintendo Wii at one end, and the RCA TV inputs at the other. (Red and white are for audio; yellow is for video.)

How do you set up a Wii without the yellow cord?

How do I get my Wii to connect wirelessly?

Do candles work as a Wii Sensor Bar?

Here's how to do it:

Place two lit candles roughly as far apart as the sensor bar is wide. In your Wii's settings, choose whether the candles are above or below the television just like you would for the sensor bar. Aim the WiiMote between the two candles and your pointer will respond on the screen like normal.

How do you reset the sensor bar on a Wii?

Wii Sensor Bar: How Can I Reset It? Locate the Nintendo Wii console's “reset” button on the front. To reset the device, press and hold the power button for a few seconds. Wait for the home screen to display, then press and hold the Wii's “power” button until the Wii shuts off and the power light goes red.

What does 4 blinking lights on Wii controller mean?

The Wii Remote has four Player LED lights that are used as various indicators: The LED that is illuminated indicates the Player number. Blinking LEDs indicate the Wii Remote is attempting to sync. When the Player LEDs are blinking they will indicate the battery level.

Can you use rubbing alcohol to clean Wii games?

Remove fingerprints and grease with rubbing alcohol.

Apply a dab of isopropyl alcohol to a clean cloth, and rub the disc from the center to the rim. Carefully wipe off moisture with a dry cloth with the same motions, then let sit for two minutes so it is completely dry.