Why wont my Wii U read discs?

Visually inspect the disc(s). If the discs look dirty or damaged, clean them. Sometimes a dirty disc can appear damaged, but just needs to be cleaned. If the disc plays without error, please continue to use your Wii U as normal.

How do you clean a Wii U disc reader?

Dab a little of the included cleaning liquid on the little bristles, put the disc in, select the disc and the Wii U will go into a self-cleaning mode (around 20-30 seconds), repeat as needed. It took three tries before the console started recognizing discs again, but it has worked perfectly ever since!

How do you clean a Wii laser lens?

You put 2-3 drops of the supplied cleaning fluid on the pad, then insert the paddle into the Wii's disc slot. You wiggle the handle 10-20 times to clean the lens. Press the Eject button to remove the paddle, and you're done.

Why can't I play Wii games on my Wii U?

The Wii U is backwards compatible with Wii games, but only when played on the big screen. And it gets worse – you won't even be able to play that TV-based Wii game with the GamePad as a controller, you'll need the original Wii Nunchuck and WiiMote.

How do you fix a disc that won't read?

Check the Disc

Clean your discs – Grime and dirt can make it hard for the drive laser to read small groves located on your disc. If the disc is dirty, you can try cleaning it with filter water and a clean cloth; or better yet, a specialized disc cleaning solution and cloth can be purchased in most electronic stores.

Wii U Invalid Disc Fix - Disc Drive Repair - Grinding Noise

Can you fix an unreadable disk?

Method 2: CheckDisk (CHKDSK)

CheckDisk is a repair tool available using Command Prompt that's able to repair logical and physical hard drive-related errors, including if your disk is corrupted and unreadable.

Why is my disk unreadable?

If the hard drive consists of bad sectors, it may show you an error - disk structure is corrupted and unreadable whenever you try to access it. Try running the CHKDSK command to scan and fix the corrupt hard drive.

Do Wii U games still work?

As long as you already own a game on the 3DS or Wii U, you'll be able to redownload it from the eShop "for the foreseeable future". That means that redownloading will still be possible after March 2023, but we don't know how long for.

Did Nintendo stop supporting Wii U?

Notice of End of Purchases in Nintendo eShop for Wii U and Nintendo 3DS - Update February 2023. As of 27 March 2023, it will no longer be possible to make purchases on Nintendo eShop for Wii U and Nintendo 3DS. It will also no longer be possible to download free content, including game demos.

How do I get my Wii U to work?

How do I get my Wii to read discs?

Can you clean a laser lens with rubbing alcohol?

Step 3 Laser Lens Cleaning

It is very important that the lens is not damaged because the lens is used to read the discs. Dip one end of a cotton swab in rubbing alcohol. Lightly dab the swab on the lens. Be very gentle.

How often should I clean my laser lens?

Daily (after 8 hours of lasering) Every day, or after 8 hours of solid laser cutting, be sure to check the lens and clean it if necessary. The top lens and mirror are right above the laser beam which means they are exposed to a lot of dirt, fumes, smoke and debris. If the lens gets dirty a few things happen.

Can the Wii U Read burned discs?

As you might imagine, there is a catch here; while you can store and run games on a disc through a DVD drive, the Wii U's own disc drive won't be able to read them. You'll have to keep that DVD drive handy.

How do you fix a dirty Wii U disc?

Dampen a clean, soft, cotton cloth with water. Use straight strokes and wipe the disc (non-labeled side) from the inside rim to the outside rim. Using a dry part of the cloth, repeat step 2 to dry the disc.

Can you use rubbing alcohol to clean Wii games?

Remove fingerprints and grease with rubbing alcohol.

Apply a dab of isopropyl alcohol to a clean cloth, and rub the disc from the center to the rim. Carefully wipe off moisture with a dry cloth with the same motions, then let sit for two minutes so it is completely dry.

How many years does a Wii U last?

Wii U hardware review: Double the screens, double the fun? Compared to the Nintendo Wii's 101 million sales, the Wii U sold a mere 13.56 million units during its more than four-year lifespan (November 2012 to January 2017).

How long will Wii U be supported?

Sadly, the success of the Nintendo Switch means that era of the 3DS has finally come to an end, with both the Wii U and Nintendo 3DS eShop closing on the 27th of March 2023. With this closure, many brilliant games will either become unaffordable or even completely unobtainable.

What is replacing the Wii U?

It's a true demonstration of how powerful first impressions can be; for the Wii U, its debut trailer brought doubt and confusion, whereas its successor, the Switch, debuted to palpable excitement. But were the two reveals really so different?

Is Wii U Online Dead?

Nintendo shuts down yet another 3DS and Wii U online feature as both consoles move closer to the end of their product lifecycles. Nintendo had shut down yet another 3DS and Wii U online feature earlier this week.

Is Wii U still updated?

Wii U Receives Its First System Update Of 2022, Here's What's Included. Nintendo has released a new system update for the Wii U. The patch notes mention enhancements to the "overall system stability" and various other minor adjustments.

Why did the Wii U fail?

The Wii U Lacked Third-Party Support

The Wii U's hardware was in a weird spot (it had a relatively good GPU but an underpowered CPU), and Nintendo was way behind the competition with regards to online play. This gave developers a hard time in trying to release third-party titles for the Wii U.

How do I make a disc readable?

Clean the disc with warm water, soap, and a cloth and then dry it, making sure that no lint is left behind. Squeeze toothpaste onto the disc and rub it on the disc in a straight motion from the center out to the edges. Finally, wash off the toothpaste and dry the disc. It should work now!

How do I know if my disk is corrupted?

Right-click on the drive that you wish to scan - most commonly this will be your C: Drive or D: Drive - then click Properties. The Properties window for the selected drive will now open. Here, click the Tools tab and then click Check under the Error checking section.

What do I do if my disk is corrupted?

Right-click Start and click Disk Management. Right-click the volume of your corrupted hard drive and select Format. Ensure Perform a quick format is selected and click OK. Click OK again to confirm the action.