Why won't my Xbox controller connect to anything?

If you aren't able to connect to the console at all, replace the controller batteries with fresh ones and make sure the controller is powering on.

Why is my Xbox controller on but not responding?

Controller isn't responding

Press and hold the Xbox button  on the face of the controller for about 6 seconds—this will turn the controller off. Press the Xbox button  again to turn the controller back on.

Why is my controller not connecting to my Xbox and blinking?

The batteries are low. Just plug in your controller to recharge its internal battery. Once it's charged, the blinking will stop.

How do I force restart my controller?

Turn off and unplug your PS4 console. Locate the small reset button on the back of the controller near the L2 button. Use a small tool to push the button inside the tiny hole. Hold the button down for roughly 3-5 seconds.

How do you unfreeze an Xbox controller?

Use new batteries and test again. 7) Hard reset the Xbox - Hard reset the Xbox by holding down the power button on the front of the Xbox for 15 seconds. After the 15 seconds let go of the power button then restart the Xbox. 9) Re-sync your Xbox One controller to refresh the connection back to the Xbox.

How to FIX Xbox One Controller Won't Sync and Blinking Lights (Easy Method)

How do I fix my controller not responding?

Why is my controller not turning?

The cable could be worn out or broken. Make sure it's securely plugged in on both ends. If that's not the issue, unplug it from the Xbox One and plug it into a different USB port on the console. If the controller still won't turn on, disconnect the Play & Charge cable and try a different micro USB cable.

Why won t my Xbox controller turn on with new batteries?

You should try connecting your Xbox controller to the console with a USB cable and see if it will again pair to the console. Hopefully, losing its paring is all that's wrong with the controller after the update. Also while connected to USB, you might try updating the controller again using the cable.

Why does my Xbox controller blink twice then turn off even with new batteries?

Why is my Xbox One controller blinking twice and then turning off? Xbox One controller blinking twice and turning off could indicate that your console is experiencing a power outage. If your console does not receive enough power, it will shut down to conserve battery fuel.

How do I reset my controller connection?

Locate the small reset button on the back of the controller near the L2 button. Use a small tool to push the button inside the tiny hole. Hold the button down for roughly 3-5 seconds. Plug in your console, connect your controller using a USB cable and press the PS button.

Why my controller is not working?

Gamepad not working in PC games – It's likely that your controller isn't properly configured or it is damaged. Connect it to another PC to test its functionality. Gamepad not in Device Manager – If the gamepad is not recognized by your system, you need to unplug any other USB devices and leave the controller only.

How to do a hard reset on Xbox one without controller?

Turn off your console by pressing the Xbox button  on the front of the console for about 10 seconds, until it shuts down completely. Unplug the console's power cable. Wait 10 seconds. Important Be sure to wait at least 10 seconds.

What buttons do I press to factory reset my Xbox One?