Skip to main content

Why won't the Wii read the disc?

Cleaning the console with a lens-cleaning kit is your first step if the console isn't reading discs at all. The problem may be a dirty lens. If cleaning the lens doesn't help, perform a system update. If cleaning and updating don't do anything, contact Nintendo.
Takedown request View complete answer on lifewire.com

How do I fix my Wii when it wont read discs?

What to do
  1. Eject the problematic disc if it is still in the system.
  2. Power the system off and ensure it is placed correctly.
  3. After 30 seconds has passed, power the Wii back on.
  4. Insert the disc. Be sure to verify you are inserting it correctly.
Takedown request View complete answer on en-americas-support.nintendo.com

Why is my disc unable to read?

Check the Disc

Clean your discs – Grime and dirt can make it hard for the drive laser to read small groves located on your disc. If the disc is dirty, you can try cleaning it with filter water and a clean cloth; or better yet, a specialized disc cleaning solution and cloth can be purchased in most electronic stores.
Takedown request View complete answer on driversupport.com

How do you get a Wii to read a scratched disc?

How to Fix a Scratched Video Game Disc: Cleaning Tips & Repair...
  1. 1 Make sure the disc is the problem.
  2. 2 Clean the disc with soap or rubbing alcohol.
  3. 3 Dry the disc with a microfiber cloth.
  4. 4 Fix deeper scratches using toothpaste.
  5. 5 Rub petroleum jelly into the disc.
  6. 6 Use car wax to buff the game.
Takedown request View complete answer on wikihow.com

How do you fix a game disc that Cannot be read?

How to fix Xbox disc errors
  1. Check for damage. Inspect the disc: Look at both sides of the disc. ...
  2. Clean the components. ...
  3. Test another disc. ...
  4. Update and restart your Xbox One. ...
  5. Change power modes on your Xbox One. ...
  6. Move your Xbox One. ...
  7. Reset your Xbox One.
Takedown request View complete answer on asurion.com

Nintendo Wii Disk Read Error QUICK FIX

How do I make a disc readable again?

Start with a basic toothpaste, something natural without any fancy gels, swirls or flavors. Squeeze a small amount onto the CD starting at the middle radius and rub it in using a sweeping motion until the entire CD is covered in a light layer of toothpaste. Let it dry, then rinse it off using tepid water.
Takedown request View complete answer on copycatsmedia.com

How do you clean Wii discs?

Dampen a clean, soft, cotton cloth with water. Use straight strokes and wipe the disc (non-labeled side) from the inside rim to the outside rim. Using a dry part of the cloth, repeat step 2 to dry the disc.
Takedown request View complete answer on en-americas-support.nintendo.com

Does toothpaste fix Wii discs?

Toothpaste works best for shallow scratches and scuffs on the reflective side. It will probably not work on a deep scratch. Scratches on the non-reflective label side should never be rubbed, and may have caused irreparable damage. If you have deep scratches, consider sending the disk to a disk repair service.
Takedown request View complete answer on wikihow.com

How do you fix a scratched Wii disc with toothpaste?

Apply a small dab of white toothpaste or metal polish to a clean, lint-free (ie fluff-free) cloth and rub very gently along the scratch from the disc's centre outwards. Cover the full length of the scratch, then repeat twice for good measure.
Takedown request View complete answer on theguardian.com

How do I know if my disc is bad?

What are the symptoms of a bad brake rotor/disc?
  1. You hear squealing or squeaking noises while braking.
  2. The brakes are vibrating or pulsing when you step on the brake pedal.
  3. The rotors show grooves or score marks.
  4. It takes you longer than normal to slow down or stop.
Takedown request View complete answer on johnsautocare.com

Can a broken disc be read?

If the disc isn't cracked all the way through, there is a small chance you can recover at least some data from it. However, if the information resides on a broken part of the data recording layer, there isn't much hope.
Takedown request View complete answer on makeuseof.com

How do you clean the laser on a Wii?

Just remove the screws on the outer shell, carefully remove the panels until you can clearly see the disc-loader, and then apply a cotton ear swab and a dab of rubbing alcohol to the laser's lens (it'll look glassy and shiny, can't miss it).
Takedown request View complete answer on smashboards.com

Will a disc cleaner work for Wii?

Typical disc cleaners have a disc with built-in brushes that you "play" as either a CD or DVD. If you try to run those products in your Wii, the disc will never be "read," which means that it will never spin enough times to actually work.
Takedown request View complete answer on amazon.com

Can a banana fix a scratched disc?

To fix, gently rub the flesh of a banana into the disk, and then lightly buff with the banana peel, which fills scratches with its natural waxiness. Once finished, rub with a clean soft cloth in circular movements, and then give a final shine with window cleaner. It's that simple.
Takedown request View complete answer on popsugar.com

Can you fix a scratched Wii disc?

The disc will need to be replaced. Nintendo no longer offers factory repairs for the Wii U console, the Wii U GamePad, or Wii U accessories. You may find our information on replacement and upgrade options helpful.
Takedown request View complete answer on en-americas-support.nintendo.com

How long do you leave toothpaste on a disc?

  1. Step 1 How to Remove scratches from a CD. ...
  2. Take the CD to the sink. ...
  3. Let the CD air dry, or dry with towel. ...
  4. Take the toothpaste, and apply it to your index finger. ...
  5. Let the CD sit for 2 to 3 minutes. ...
  6. Rinse off the toothpaste with lukewarm water. ...
  7. Let the CD air dry, or dry with a non-linen towel. ...
  8. Inspect your disk.
Takedown request View complete answer on ifixit.com

Can you use alcohol to clean a Wii disc?

Remove fingerprints and grease with rubbing alcohol.

Apply a dab of isopropyl alcohol to a clean cloth, and rub the disc from the center to the rim. Carefully wipe off moisture with a dry cloth with the same motions, then let sit for two minutes so it is completely dry.
Takedown request View complete answer on wikihow.com

Can you use water to clean a disc?

To clean a CD or DVD a microfiber cleaning cloth or cotton based tissue or cloth is recommended. Any materials used should be checked to ensure they are non-abrasive. In most instances water will suffice as a cleaning agent.
Takedown request View complete answer on discwizards.com

Can you clean discs with rubbing alcohol?

If the disc has a heavy accumulation of dirt, try rinsing it with water first. Use commercially available water-based detergent formulated for cleaning the surface of optical discs. Use isopropyl alcohol or methanol, as an alternate to water-based detergents, to clean the disc surface.
Takedown request View complete answer on clir.org

What to do if a disc is unrecognized?

PS4 Unrecognized Disc Mechanical vs. Software Fixes
  1. Boot Safe Mode and Install System Software Update.
  2. Boot Safe Mode and Rebuild PS4 Database.
  3. Full Initialize PS4 Software.
Takedown request View complete answer on wirelesshack.org

How do I know if my Wii is bricked?

If the System Menu boots fine, then the brick is simply a semibrick. If the health screen is the last screen seen, then the brick is either a banner brick or a mail brick. To test this, hold + and - when pressing A; if the system still refuses to boot, it is a banner brick, otherwise it is a mail brick.
Takedown request View complete answer on wiibrew.org
Previous question
How to spend $100 at the casino?
Next question
Is Benny also Eli?
Close Menu