Does a floor need to be reinforced for a pool table?

In most cases, you do not have to worry about reinforcing the floors. However, in some cases, you may need to, depending on the weight of your new pool table. Another reason why you should know the weight of your pool table is if you ever want to move it to another room in your house or move it to a new home.

Can my floor hold a pool table?

The biggest concern with a heavy object is the limiting of the flooring to expand. With direct pressure on the joints and planks, this can cause buckling if expansion and contraction is blocked. Pool tables under 500 pounds should be fine over a properly installed laminate floor.

What kind of floor do you need for a pool table?

Laminate Floor

Laminate flooring, or lino, is a great option for the floor in your games room. It is more firm than carpet, so tables should 'settle' less, but it's still soft enough to absorb dropped ball impacts without damaging either the floor or the ball.

Can a second floor hold a pool table?

Absolutely. Assuming your room is up to building code standards of course. Some of the homes that we've installed pool tables in upstairs have had floors that have flexed a bit.

Can you put a pool table on hardwood floors?

Hardwood flooring is a better solution for pool tables but you're not completely off the hook. Fluctuations in temperature and humidity can cause your flooring to shrink and expand slightly. This can be enough to throw off the alignment of your table.

What Floors Are Suitable For Pool Tables? - Pool Table Buying Advice

What is best for pool floor?

Glass tile, while the most expensive, is the best choice for swimming pool floors. Not only is it stylish and smooth, but it's also heat- and UV-resistant. There is truly an endless variety of colors, shapes, and patterns.

Can you use plywood for a pool table?

All wood: Not to be confused with solid wood. Look at the bottom edge of the frame or any router cut details in the side of frame – if you can see grain, it is solid. If you don't, it could be plywood or MDF, both of which are acceptable products in the billiard and furniture industry.

How much weight can second story floor hold?

The load capacity of a second floor in a home is regulated at 40 lbs. per square foot. For bedrooms, the capacity is 30 lbs. per square foot.

What's the heaviest part of a pool table?

The heaviest part of your pool table is the slate. Our tables feature 3 pieces of slate fitted to ensure perfect play, and these pieces weigh in between 150-250 pounds each.

How many pounds can a floor hold?

Most residential floors are default designed for 40-50 lbs per square foot, unless more is planned for.

Is it better to have a rug under a pool table?

The main purpose of placing an area rug under your pool table is that it can protect the floor from extra wear and tear and balls that are struck off the table. A flying ball can actually cause dents in hardwoods and crack tiles, which can be expensive and time consuming to repair.

What do you put under a pool table to level it?

There are 3 ways that your billiards table can be leveled; metal plates, adjustable legs, and wood shims. Most pool tables come with metal plates (shims) that can be used to level the playing surface of your billiards table.

How far off the ground should a pool table be?

There are also some other specific requirements, such as the height of the table has to be between 29.25 inches and 31 inches, the slates have to be at least an inch thick, and the rail width must be at least 4 inches but no more than 7.5 inches.

Will a pool table be OK in a garage?

As far as the practicalities of installing a slate pool table in your garage relies on one important rule of thumb. The Golden Rule as I called it, dictates that as long as you have at least 48-58 inches of clear space around your pool table's playing surface you're good to go.

Are pool tables fragile?

Despite their size and weight, some pool tables can be incredibly fragile, and we would therefore strongly recommend never standing on a pool table. The key part to understanding why a pool table shouldn't be stood upon is its slate.

Will a pool table ruin my carpet?

Installing a pool table on carpet is tricky business. Moving the table into the room can damage the delicate fibers of your carpet, leaving tracks from the door to the table's ultimate home. To avoid this lay a tarp or heavy cloth over the carpet and slide the table dolly across along it.

How heavy is a 8ft slate pool table?

The average pool table weights for slate bed pool tables are: 6-Foot Table – 500 Pounds. 7-Foot Table – 700 Pounds. 8-Foot Table – 1,000 Pounds.

How much does it cost to Refelt a pool table?

It costs $300 on average to refelt a pool table, with a typical price range of $250 to $300. You may pay as little as $150 or as much as $500. Pool tables come in three sizes, and size affects the price. The cost of pool table refelting is fairly evenly split between materials and labor.

Can a floor hold 3000 pounds?

The standard weight capacity for a second floor is between 30 and 40 pounds per square foot. This means that your 100 square floor should be able to support between 3,000 and 4,000 pounds without any additional loads being placed on it.

Can a table be too heavy for floor?

Yes, it can. Heavy furniture can easily damage wooden flooring, as timber is a natural product – when under extreme weight it can dent or sink. This can begin from day one if you do not protect your floors.

Can too much weight break floor?

The answer is that, absolutely, weight can cause a floor to collapse. Often, the older the building, the less the floor will be able to support, because many materials weaken with age. This would be highly unusual but yes it could happen, water beds have damaged floors by their weight.

What do you seal a pool table with?

This is a no brainer and the correct method is beeswax. We have seen almost everything imaginable used on seams. Duct tape, scotch tape, candle wax, Elmer's glue you name it, and all of that is actually better for your table than rock hard putty.

What is the best wood for a pool table?

Oak is hard, stiff, and shock resistant making it an ideal material for the construction of billiard tables. Maple - Maple is one of the most commonly used hardwoods because of its heavy weight, density, and durability.

Can you install your own pool table?

It's clearly something that's entirely possible to accomplish as a do-it-yourself project. In this article, the experts at Century Billiards, the leading manufacturer of custom pool tables for five generations, will offer some of the best tips for how to build a pool table at home.